• Journal of Korea Water Resources Association
• /
• v.31 no.3
• /
• pp.291-301
• /
• 1998

The objective of this study is to analyze the characteristics of flow and bed topography with changing bed material in a 180-degree, with constant-radius curved experimental channel. Sand($D_{50}$ = 0.56 mm, s = 2.65) and anthracite($D_{50}$ = 0.26 mm, s = 1.54) were selected as bed materials. The maximum scour depth was found to be about two times for the mean flow depth at the outer bank of bend angle $30^{\circ}~60^{\circ}$, and in case of anthracite, it was found upper part of bend angle $5^{\circ}~15^{\circ}$ than that of sand. Regardless of bed materials the path of maximum streamwise velocity is skewed inwards in the upper part of the bend, the maximum velocity shifts outwards, and it lagged downward as bed roughness increases. The maximum skewed angle of flow grows faster in the smooth bottom than in the rough one, and its value also increases. The secondary flow in anthracite bottom was measured larger than that of sand one, and two cells of secondary flow was found in this experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.606-606
• /
• 2012

최근 지구 환경변화에 따른 기후변화의 영향으로 이상홍수 발생의 위험성이 증가하고, 상습적으로 홍수피해가 반복되고 있다. 홍수피해의 원인 중 하나인 하천제방의 붕괴는 월류, 침식, 제체불안정, 구조물에 의한 파괴 등으로 구분되고 이 중 월류 및 침식은 제방 파괴의 주된 원인으로 최근 통계자료에 보고되고 있다. 제방붕괴의 주된 원인 중 하나인 침식파괴로부터 제방을 보호하기 위해 제내지 사면에 호안공을 설치하며, 하천설계기준 해설(2009)에서는 제방 또는 하안을 유수에 의한 파괴와 침식으로부터 직접 보호하기 위해 제방 앞비탈에 설치하는 구조물로 정의하고 있다. 특히 사행하천의 만곡부에서는 제방파괴의 위험성이 높을 뿐만 아니라 국부적으로 집중되는 유속분포는 제방의 안정성을 위협한다. 또한 원심력, 2차류(secondary flow) 등에 의한 수위상승 등에 의해 제방이 파괴되고 월류되어 홍수피해가 발생할 가능성이 큰 취약지점이라고 할 수 있다. 본 연구에서는 2차원 수치모형을 이용하여 만곡부 흐름 특성을 분석하고 수리실험을 통해 측정된 유속 및 수위분포 결과와 비교하여 분석하였다. 또한 수리실험에서 도출된 호안 붕괴 시의 흐름을 구현하여 호안 붕괴 시 국부유속 및 전단응력을 계산하고 만곡부 호안의 안정성을 위한 설계인자를 분석하였다. 연구결과로 제시된 만곡부 안정성을 위한 설계인자는 국외 호안공 설계식과 비교하여 국부유속 및 전단응력의 설계인자의 적합성을 검토하고 국내 만곡부 호안의 안정성 설계기법개발에 도움이 될 수 있는 설계인자를 제시하고자 한다.

• Journal of Korea Water Resources Association
• /
• v.35 no.2
• /
• pp.195-201
• /
• 2002

In this study, an equation is proposed to estimate the limit velocity for lateral stable bed in a curved channel stream. The stable bed on lateral direction is satisfied when there is no more deformation occurs on the transverse bed slope and non-scouring condition in a bend. A theoretical equation for limit velocity is derived using a transverse bed slope model. So, the limit velocity has its theoretical background in the equilibrium of two forces, lateral shear force at the bed due to longitudinal flow and the corresponding lateral bed shear force. To verify the equation, data from four natural river channels were used. There is good agreement between the calculated values using this equation and the measured values. The corrections in equation was found to be correlated with the averaged particle Froude number.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.700-700
• /
• 2012

산지유역은 하천을 따라서 도로가 발달되어 있어서 대부분의 도로가 홍수시 하천의 영향을 많이 받는다. 산지하천은 경사가 급하고 만곡수충부가 많이 발달되어 있기 때문에 홍수시 유속이 빠르고 만곡수충부의 편수위가 매우 크다. 이는 만곡부 호안 파괴와 도로 유실의 피해를 일으키는 경우가 많다. 따라서 대부분의 산지하천 만곡수충부에는 홍수피해 방지를 위해 콘크리트 옹벽호안으로 되어 있다. 그러나 콘크리트 옹벽은 조도가 작기 때문에 유속이 더 빠르게 되고 편수위를 한층 증대시킬 수 있다. 산지하천 만곡수충부의 편수위를 줄이기 위해서는 접근유속을 줄여야 하나 산지하천 특성으로 볼 때 접근유속 저감을 위한 공학적 방법은 제한적이다. 따라서 만곡수충부의 유속을 줄이는 방법으로 콘크리트 옹벽호안의 조도계수를 증대시키는 것이 효과적일 수 있다. 본 연구에서는 개수로 측벽에 수직돌출줄눈이 설치되었을 때 흐름에 미치는 수리효과를 개수로 수리실험으로 파악하고자 한 것이다. 실험결과 돌출줄눈의 간격이 수직돌출줄눈의 무차원 폭이 9일 때 평균유속이 가장 작게 나타났다. 이는 돌출줄눈의 간격이 개수로 내부흐름의 유속분포, 최대유속발생 위치, 유수단 면적의 크기에 영향이 미치기 때문이다. 따라서 개수로 측벽 수직돌출줄눈의 간격을 조절함으로써 개수로 유수저항의 크기를 조절할 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.341-348
• /
• 2017

This study examined the effects of the location and direction of the scolioti curve on postural balance in patients with idiopathic scoliosis. Fifteen subjects were divided into three groups: right thoracic curve group, left lumbar curve group, and double curve group. The dynamic trunk motion (angle variation in the lumbar, thoracolumbar, lower thoracic and upper thoracic region) and plantar pressure distribution (maximum force and peak pressure) were assessed using an ultrasound-based motion analysis system and Emed-at platform system. From the results, it was confirmed that patients with idiopathic scoliosis showed postural imbalance with an increased angle and pressure asymmetry according to the location and direction of the scoliotic curve for dynamic trunk motion and plantar pressure distribution. In addition, there were differences in the postural balance pattern between the single curve and double curve groups. Further studies for developing a rehabilitation training device will be conducted to improve the postural control ability and trunk balance as well as treat scoliosis based on the results of this study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.645-648
• /
• 2010

본 연구에서는 복단면 사행수로의 흐름특성과 수위특성을 정량적으로 분석하고자 코사인 유도형(cosine-generated) 복단면 만곡 수로 실험 자료를 기초로 3차원 수치모의를 수행하였다. 수치모의에는 3차원 수치모의 프로그램인 Flow3D을 사용하였고, 난류 모델은 RNG ${\kappa}-{\epsilon}$ 모델을 사용 하였다. 수치모의 결과는 실험 결과와의 비교를 통하여 평면유속분포 및 유속벡터, 만곡부 단면에서의 수위분포 등으로 분석하였고, 이는 이전의 실험결과와 일치하는 것으로 나타난다. 특히, 평면 유속분포는 수위 증가에 따라 저수로 중심의 최대 유속선이 만곡 내측으로 이동하는 것이 모의되었다. 이런 흐름구조는 다른 연구자들이 이전까지 연구한 실험 및 수치모의 결과와도 일치한다. 또한, 수위 분포 결과에서는 사행하도의 원심력에 의한 흐름특성인 만곡부 내측과 외측의 수위차가 미세하게 발견되었다.

• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.529-536
• /
• 2016

The existing methods to estimate the maximum scour depth in the bend of steep gravel bed channel have been evaluated by the hydraulic movable-bed experiments. In the $90^{\circ}$ bend steep-slope channel paved with the fluvial gravels which are uniform in size and have a mean diameter of 43mm, the maximum scour depths due to the flow discharge and the gradient of bed slope have been investigated and compared with the scour depth computed from the equations. The local scour has occurred in conditions that the bed slope is steeper than 0.02 and the $F_r$ is greater than 0.95. Except Lacey's equation and Zeller's equation, the existing methods computing the maximum scour depth overestimate the maximum scour depth in the steep channel with the very coarse gravel bed. However, Lacey's equation with the bed material size and Zeller's equation considering the approach channel gradient and the bend angle may be relatively used to estimate the scour depth in bend of the steep gravel-bed river.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1077-1087
• /
• 2015

The levee protect lifes, houses, and properties by blocking overflow of river. The revetment is forced to be covered on the slope of levee in order to prevent erosion. The stability of revetment is very important enough to directly connected to the stability of levee. In this study, the weak points of revetment on meandering channel were found by movable revetment experiment and the velocity and the water surface elevation (WSE) were measured at main points. The 3-D numerical simulations were performed under same conditions with experiment. And unclear flow characteristics by the limit of measuring instruments were analyzed through numerical simulation. Consequently, the section of large wall shear stress and the failure section are almost the same. Despite of small wall shear stress, the revetments located at right bank were carried away because of circulation zone due to secondary flow by meandering. With existing riprap design formula, the sizes of riprap determined using maximum local velocity were 1.5~4.7 times greater than them using mean velocity. As a result of this study, it is necessary to calculate the size of riprap in other ways for meandering and straight channel. At a later study, if the weighted value considered the radius of curvature and shape of hydraulic structure is applied to riprap design formula, it is expected that the size of revetment was evaluated rationally and accurately.

• Water for future
• /
• v.25 no.3
• /
• pp.87-96
• /
• 1992

Hydraulic characteristics such as velocity, surface level and flow pattern in the curved channel are analyzed by model experiment, where model is scaled down by 1:20 for prototype channel containing side branch and curved section. The withdrawal of channel flow from channel is analyzed to find the effect on the curve section. The numerical scheme for shallow water equation using ADI method is verified through the comparison of hydrauric characteristics by experiment with that by numerical analysis in the side section of model channel. The comparison of numerical results with experimental data shows that velocity, surface level and flow pattern agree well for overall channel. Because fo the relative contraction of cross section in the curved section caused by rectangular system, the velocity calculated by numerical analysis is faster in curved section than that from experiment, which can be improved using finer spatial grid in curved section. The characteristics of the curved section such that the surface level is higher in the outer zone of curved section and the velocity is faster in the inner zone are well simulated by both experiment and numerical analysis. The effect of side branch reaches within the zone of the curved section.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.195-202
• /
• 1987

The flow characteristics in the shallow open channel bends are investigated, whose total angles were 30, 60, 90, 120, 150 and 180 in degree, and whose bed frictions were relatively rough(C=30) and smooth(C=60), respectively. The terms analyzed in this study are the water surface profile, the distribution of velocity and the flow direction, relating to the various total angles in the bends. The maximum depth in the bends could be found at the outside section of the location of $15^{\circ}$ local angle from the bend inlet, having no relation to the total angle and bed friction. It is supposed that the path of maximum velocities is especially influenced by the bottom friction when the total angles are bigger than 150 in degree, approximately. The ratio of the superelevation to the velocity head seems to increase as the total angle of the bends increases. The flow direction is skewed to the inner side at the bend inlet, and skewed to the outside at the bend outlet, regardless of their total angles.