• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.1 s.20
• /
• pp.69-81
• /
• 2006

The purpose of this study is to identify the downstream influences due to the dam discharge by using 2-dimensional model, SMS(Surface water Modeling System). RMA-2 and SED-2D in SMS were applied to Yongdam multipurpose dam watershed located in Gum river basin. Through the simulation, erosion and deposit quantitative analysis of sinuous channels and scour pattern analysis of bridges have been done. A differences erosion depths between deposit are simulated as $-102.4 mm{\sim}54.2 mm$ at No.176(1.4 km) and $-104.1 mm{\sim}28.9 mm$ at No.146(7.4 km), sinuous channel. The river bed at Kamdong bridge in straight channal is simulated as uniform erosion. However, the river bed at Dumdul bridge in sinuous channal has been shown as different erosion depths at each sides. Consequently, the parts that could not be simulated on the existing 1-dimensional model, can be improved results by using a 2-dimensional model, about weakness points for hydraulic modeling such as extreme bend, tributary confluence.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.95.1-95.1
• /
• 2010

본 연구에서는 만곡하천에서 본류와 지류의 합류각에 따른 수치모의 결과를 이용하여 합류부에서의 유속변화를 파악하는데 목적이 있다. 적용대상지역은 조양강과 용탄천 합류부로서, 만곡하천에 지류가 합류하며 유량이 적은 지류의 합류부에서 유속변화가 나타나는 지역이다. 합류부에서의 지류의 합류각에 따른 유속변화량을 알아보기 위하여 지류의 합류각을 $30^{\circ},\;60^{\circ},\;90^{\circ},\;120^{\circ}$로 바꾸어 수치모의를 실시하였고, 수치모의는 상용 2차원 수치모형인 RMA-2를 이용하였다. 합류부에서 지류의 합류각이 커짐에 따라 합류점의 유속이 느려지고, 유속이 감소하는 범위가 넓어짐을 알 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.241-241
• /
• 2022

우리나라의 자연하천은 대부분 사행하천으로 이루어져 있다. 특히 사행하천의 만곡부에서는 2차류가 발생할 수 있으며, 이는 만곡부의 흐름에 비선형적인 영향을 미치게 되어 흐름과 유사이송에 대해 복잡한 상호작용을 하게 된다. 하천에 서식하고 있는 식생 또한 흐름에 영향을 줄 수 있다. 더군다나, 댐으로 인한 유사의 차단과 방류량 통제는 댐 하류 구간에 영향을 주게 되어 식생활착을 야기할 수 있으며 활착 이후에는 통제가 어려울 정도로 식생밀도가 증가하며 번성하기도 한다. 이러한 현상이 지속되면 식생으로 인해 통수능이 저하되기도 하며, 홍수범람이 발생할 수 있다. 따라서 만곡부 하도식생에 의한 흐름변화를 연구하는 것은 치수적인 측면에서 중요하다. 본 연구에서는 이러한 필요성을 고려하여, 2차원 흐름모형인 Nays2D를 활용하여 식생대의 밀도변화에 따른 흐름변화 예측모의를 위한 수치실험을 수행하였다. 연구지역은 사행하천으로서 식생대가 발달한 대청댐 하류 구간이다. 본 연구에서는 현장조사를 통해 구축한 식생특성을 반영하여 예측모의를 수행하였으며, 이를 위해 부등류를 기반으로 식생밀도에 따라 2021년의 식생현황, 전체벌채(식생없음), 솎아베기(2021년 식생밀도의 0.5배), 존치(2021년 식생밀도의 2배)로 가정하여 모형을 구축하였다. 모의결과, 전체벌채의 경우, 2차류에 의해 흐름이 만곡부 외측으로 집중되었기 때문에 만곡부 외측에서 수심과 유속이 증가하였다. 2021년 식생현황과 솎아베기, 그리고 존치의 경우, 공통적으로 만곡부 외측에 식생이 존재하고 있기 때문에 전체벌채보다 수심이 증가하고 유속이 감소하였으며 식생대 주변과 하도중앙으로 흐름이 집중되는 경향을 나타났다. 이를 통해, 전체벌채의 경우 치수적으로 만곡부 외측에서 2차류의 발달로 세굴을 야기할 가능성을 확인할 수 있었으며 식생이 존재하는 경우에는 만곡부 외측에 퇴적이 발생할 수 있을 것으로 판단된다. 본 연구에서는 식생과 흐름만을 고려하여 수치모의를 수행하였으나 추후 연구에서는 흐름과 하상변동을 모두 고려하여 수치모의를 수행한다면 보다 세부적으로 식생밀도가 하천환경에 미치는 영향 이해할 수 있을 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4845-4852
• /
• 2012

This research calculated the scour depth of bridge according to inflow and outflow changes of stream's flood discharge and curves by applying scour depth formula for piers and abutments, and by comparing and examining them, evaluated the applicability of scour depth formulas. Overall, if the angles of flood discharge and inflow and outflow increase, the deviation rate of scour depth in bight increased. Especially the deviation rate was 58% at the inflow and outflow angle of $105^{\circ}$ that the bridge plan for this geography need careful examination. Next, as a result of calculating the deviation rate of scour depth at the bight by scour depth formulas, in case of pier, Andru formula showed 58% deviation rate, Laursen formula showed 26% deviation rate, and CSU. formula showed 17% deviation rate. In the case of abutment, Froehlich formula shows 44% deviation rate that when applying above scour depth formulas, scour depth calculation considering repairable characteristics of bight is necessary. Finally, about inflow and outflow angles of $45^{\circ}{\sim}135^{\circ}$ that showed big deviation rate of scour depth, this research performed regression analysis of deviation rates of scour depth due to flood discharge to suggest the regression formula.

• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.327-334
• /
• 2005

This study investigated the effect of anticurvature filing method on preparation of the curved root canal using ProFile. Thirty six resin blocks were divided equally into three groups by instrumentation motions: anticurvature filing motion. circumferential filing motion and straight up-and-down motion. Each resin block was sectioned at 8mm level from the apex and at the greatest curvature of the canal and reassembled in metal mold by a modified Bramante technique. All groups were instrumented with the ProFile system. At each levels. image of sectioned surface were taken using CCD camera under a stereomicroscope at $\times40$ magnification and stored. Distances of transportation at the inner and outer area of curvature and the centering ratio were determined and compared by statistical analysis. along with the assessment of the increase of root canal cross-sectional area. The results were as follows; 1. In all groups. there was no statistical difference in the mean increase of root canal cross-sectional area. the centering ratio. and the mean distances of transportation at the inner area of curvature at each level. 2. At 8mm level from the apex. the mean distances of transportation at the outer area of curvature decreases in following order anticurvature filing motion. circumferential filing motion. straight up-and­down motion but. no significant difference at the greatest curvature of the canal among three groups. Effect of anticurvature filing motion using ProFile does not seem to be different from other instrumentation motions at the inner area of curvature in curved root canal.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.372-376
• /
• 2005

본 연구에서는 다양한 유량 조건 하에서 수로의 만곡이 존재하고 하중토가 존재하는 비교적 복잡한 지형에 대한 수리모형실험에 LSPIV기법과 기존 점유속계(2차원 전자기유속계)를 함께 적용하고 그 결과를 비교하여 복잡한 흐름에 대한 LSPIV의 적용성을 검토하였다. LSPIV를 이용한 표면유속장과 2차원 전자기유속계를 이용하여 1점법으로 측정된 유속장을 비교할 때, 수로 만곡과 같은 지형적 특성으로 인한 유속분포의 특성이 유사하게 관측되었으며, 홍수시의 주변고수부지 및 하중도 침수로 인해 복잡한 흐름구조가 발생하는 경우에는 LSPIV를 이용한 표면유속장 측정을 통하여 흐름특성을 더욱 명확하게 관찰할 수 있었다. 측정된 유속자료 및 하도단면자료를 이용하여 홍수량을 산정해 본 결과 하도횡단면이 비교적 단순한 경우에는 표면유속과 점유속을 이용해 계산한 홍수량 간의 차가 크지 않았으나 하도단면이 복잡한 경우에는 계산된 홍수량 사이의 차가 크게 나타났다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.06a
• /
• pp.199-230
• /
• 1994

The blanking sequence of refrigerator and air-conditioner compressor-motor-core has been determined by trial and error. To improve such problem, 2d-analysis using ANSYS to verify the deformation state has been done firstly. And 3d-analysis following up the real process has been done. Additionally, verified the 3-d analysis result using S/W LS-DYNA.

• Water for future
• /
• v.21 no.4
• /
• pp.399-406
• /
• 1988

Presented in this paper is a brief summary of the basic theory and observation from a laboratory investigation aimed at determining flow characteristics and ice jam topography in a sinuous channel, and in a single-bend channel. The sinuous channel comprised thirteen $90^{\circ}$ bends and was of comparatively small s\aspect ratio. The single-bend channel was a $180^{\circ}$ bend, which was an order of magnitude large in width as well as aspect ratios than the sinuous channel. The simulated ices were polyethylene and polypropylene beads and block. The streamwise velocities near the bottom were larger than that of surface in sinuous channel and forming ice jam in sinuous channel, this phenoumena were found strongly. Jams were generally thicker along the inner bank of bends. The path of maximum-streamwise velocity was displaced towards approachs side of the inner bank of bends. Radial variation of jam thickness was to be regular by increasing size of ice fragments. The rate of jam head progression around outer bank of the single bend was faster than that of inner bank and its velocity was roughly steady. With increasing Froude number, jm thickness became less uniformly distributed; being generally thicker along the inner bank and near the jam's toe. Two-layer model might be adaptable for the computing the streamwise velocity in shallow river bends. Two cells of secondary flow cound be expected in ice covered-river bends.

• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.303-311
• /
• 2005

The purpose of this study was to evaluate which type of Ni-Ti files are able to maintain canal configuration better in the simulated canal with abrupt curvature near it's apex. Ninety six simulated root canals were made in epoxy resin and $\sharp$15 finger spreader was used as root canal templates. The simulated root canals were made with radius of curvature of 1.5mm, 3.0mm, 4.0mm, 6.0mm respectively and the angle of curvature of all simulated canals were adjusted to 90 degree. The simulated canals were instrumented by ProFile, ProTaper, Hero 642, and $K^3$ at a 300 rpm using crown-down pressureless technique. Pre-instrumented and post-instrumented images were taken by digital camera and were superimposed with Adobe Photos hop 6.0 program. Images were compared by image analysis program. The changes of canal width at the inner and outer side of the canal curvature. canal transportation were measured at 9 measuring point with 1 mm interval. Statistical analysis among the types of Ni-Ti files was performed using Kruskal-Wallis test and Mann-Whitney U-test. The result was that ProFile maintain original canal configuration better than other engine driven Ni-Ti files in the canals above 3.0mm radius of curvature, and in the 1.5mm radius of curvature, most of Ni-Ti flies were deformed or separated during instrumentation.

• Water for future
• /
• v.24 no.1
• /
• pp.99-107
• /
• 1991

This study is for simulating to the model which analyzes flow characteristics and transverse bed slopes in a coarse-streambed of the meandering alluvial channels. Using the equations for conservation of mass, momentum, and for lateral stability of the streambed, a linear differential equation of transverse bed slope is derived from the flow characteristics in curved channels. Its solutions are solved by the Sine-generated curve method(SCM) and compared with results of field measurements. Lag distances by the maximum transverse bed slope and velocity profiles will predict risk sections of concave bank under floods.