• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1251-1255
• /
• 2006

도로 조건에 따른 빗물받이 유입구의 설치간격, 적정크기 및 관리 방안을 마련하여야 하며, 빗물받이 설계 시, 빗물받이 유입구의 통수능력을 저하시키는 빗물받이 유입구의 막힘 현상을 고려한 빗물받이 유입구의 합리적인 설계와 관리 방안을 마련하여 빗물 배제 능력을 향상시킴으로써 도시 홍수피해의 경감대책을 수립하여야 한다. 따라서 본 연구에서는 합리식을 이용하여 우수유출량을 계산하고, 빗물받이 차집효율 실험을 통하여 산정된 빗물받이 규격별 차집유입량 경험식을 이용하여 빗물받이의 차집유입량을 산정하였다. 막힘 현상을 고려한 빗물받이 유입구의 찻집효율 분석 실험을 실시하여 제시되어진 막힘 계수를 이용하여 빗물받이 유입구의 막힘 현상을 고려한 도로의 격자형 빗물받이 유입구의 설계 방법을 제시하였으며, Excel을 이용하여 간략하게 프로그램화 하였다. 제시된 설계방법은 실무에서 도로 조건의 변화와 빗물받이의 막힘 현상을 고려한 빗물받이 유입부의 설계에 사용 가능하다고 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.179-186
• /
• 2006

Effective interception area of street grate inlets was decreased by clogging with trash, debris, and sand. It also decreased the interception capability of grate inlets and increased the inundation area in street. Therefore, it is necessary to analyze the clogging characteristics and interception capability change by clogging for appropriate design and management of grate inlets. Hydraulic experimental apparatus which can be changed the gutter transverse slopes, longitudinal slopes of street and clogging condition of grate inlet ($40{\times}50cm$) was installed for this study. 81 total experiments were conducted with 8 different clogging condition. The interception capacities of grate inlets clogged curb direction are smaller than those of clogged flow direction. As the longitudinal slopes of street increase, the interception capacity of grate inlet decreases due to splash-over phenomena. This is also observed at grate inlets which has no clogging condition. In general, 50% of clogging factor was selected in design of grate inlet in foreign country. The clogging factor for same clogging condition are suggested 0.25~0.65 in domestic urban area.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.283-286
• /
• 2003

국내의 12개소 저산출 우물을 대상으로, 외국의 유정들에서의 산출량 증대를 위하여 많이 사용되고있는 인공수압파쇄 방법을 적용하여 산출성 증대 효과를 검증하였다. 12개소에 대하여 수압파쇄시험 전후로 양수 시험을 실시하여 투수성 증대 등의 효과와 비양수량을 정량적으로 평가한 결과, 비양수량의 경우 전체적으로 평균 약 45%의 증가하였으며 투수량계수 또한 약 26%가 증가하였다. 이러한 결과는 인공수압파쇄 방법이 대수층내 열극의 생성 혹은 확장 및 균열내의 막힘(clog) 물질 제거를 통해 투수성을 상당히 개선시킨 것으로 평가된다. 특히, 현재까지의 시험 결과, 퇴적암류 지역에서 보다 화성암류 지역에서의 시험 결과가 양호하게 나타났다. 화성암 지역에서 개발된 홍천에서의 사례를 볼 때, 고압의 주입을 통하여 상부 및 하부의 파쇄대가 확장 연결되고, 이들 파쇄 열극에 부착된 광물학적, 생물학적 막힘 물질이 제거되면서 산출성이 증대되는 것으로 나타났다.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.135-139
• /
• 2016

본 연구에서는 동역학적 격자기반 대정준 Monte Carlo (Kinetic Lattice Grand Canonical Monte Carlo, KLGCMC) 모의실험 방법을 이용하여 모델 이온채널 내에서 KCl과 HCl의 이온 전류를 시간의 함수로 구하였다. KLGCMC 모의실험 계산 결과로부터 이온채널의 양이온 선택성이 더 큰 것을 확인 할 수 있었다. 또한 모의실험 결과를 통해 각 이온의 확산계수가 전류에 미치는 영향을 확인 할 수 있었다. $H^+$ 이온은 농도가 매우 작음에도 확산계수가 커 전체 전류에 큰 영향을 미쳤다. 반면에 확산계수가 작은 $K^+$ 이온은 이온채널 안에서 쉽게 흐르지 못하고 정체 되며, $H^+$ 이온의 전류흐름을 방해하는 것을 확인 할 수 있었고, 이로 인해 이온전류의 패턴이 시간에 따라 변화함을 알 수 있었다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.129-133
• /
• 2010

본 논문은 차량의 공회전시 불완전연소로 인한 일산화탄소의 배출량이 최대인 점에 착안하여 일반 네비게이션에서 제공하는 최단거리 모드로 주행했을 시와 '막힘없는 길 안내를 제공' 한다는 최신 공간정보기술인 실시간교통정보서비스를 적용했을 시의 공회전시간 및 일산화탄소 배출량을 비교 평가하여, 실시간교통정보서비스의 일산화탄소 저감효과를 추정해보기 위해 진행되었다. 대구시내의 교통정체구역인 수성구청에서 성서초등학교에 이르는 약 12km의 구간을 선정하여 2주간 동일구간을 요일별 시간대별로 주행함으로써 최단거리 안내서비스 주행시와 실시간교통정보서비스를 적용한 경로주행시의 공회전시간을 기록하고 환경부에서 제공하는 연료별 배출계수와 평균속도에 따른 일산화탄소 배출계수를 이용하여 일산화탄소 배출량을 산정하였으며, 측정결과 공회전시간이 약 28%, 일산화탄소 배출량은 약 57%의 감축효과를 보임을 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.577-584
• /
• 2011

A series of field and laboratory permeability tests were performed to investigate the pore-clogging phenomenon of porous concrete used for pavement materials of a road. The field permeability tests were conducted for 37 study points in Jeju city, using the porous concretes with 13mm of maximum coarse aggregate ($G_{max}$). The results show that the service life of porous concrete is about 22 months when the permeability of the porous concrete is designed for 0.01 cm/sec. Some specimens were made with the purpose of recreating pore-clogging phenomenon. Tests were done for injected concentration of pore-clogging materials or size of maximum coarse aggregates ($G_{max}$). The test results demonstrated that relatively long in service life experienced with small amount of injected concentration of pore-clogging materials, whereas relatively short in service life experienced with a reduction in size of maximum coarse aggregates ($G_{max}$). In conclusion, the service life of porous concrete is in proportion to the concentration of pore-clogging material but it is in inverse proportion to the size of maximum coarse aggregate ($G_{max}$). Thus, the persisting period of porous concrete can be determined with respect to concentration of pore-clogging materials or size of maximum coarse aggregates ($G_{max}$).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1581-1587
• /
• 2014

Two-lalyered quiet asphalt pavements are well known for their noise reduction capabilities compared to the conventional ones. This study was conducted to analyze the economic effects on two-layered quiet asphalt pavement rather than on one-layered. Noise prediction was performed on the data surveyed from the two-layered quiet asphalt pavement. In addition, the economic analysis was executed considering cost benefits using the noise prediction result. The permeability test was also investigated to evaluate the clogging recovery of two-layered quiet asphalt pavement. Analysis results revealed that the construction cost of two-layered quiet asphalt pavements was cheaper than that of the conventional soundproof walls. The two-layered quiet asphalt pavement with simulated clogging conditions was satisfied the permeability requirements of the permeable asphalt pavements. The permeability test results showed that the permeable time was recorded as 6.77 seconds for one cycle of cleaning job with 400 mL of water.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.385-394
• /
• 1994

Numerical solutions were obtained to the model equations for various of the parameters characterizing the pore structure, effective internal diffusion, and the chemical reaction constant. The conversion was decreased with the cause of pore closure at the surface of reacting particles, reduction of porosity, surface area of reaction and effective diffusion coefficient in the solid with the progress of reaction. Total conversion was strongly dependent on the local conversion at surface. According to the decreasing of impregnated concentration of the copper oxide and the increase of the flue gases concentration, total conversion was increased. The conversion was affected by gas flow rate and pore size distribution in the reacting solid.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.4
• /
• pp.37-42
• /
• 2019

Hydrate dissociation is required to produce methane, which generates both water and methane. Thus, multiphase fluid flow and desalination are expected during methane production, which causes the fine migration and clogging in pores. The goal of this study is to explore the effects of both multiphase fluid flow and desalination on the migration and clogging of kaolin particles as typical fines. The results are as follows : (1) the larger the pore size is, the more mounting the critical clogging concentration is, (2) kaolin particles are more easily clustering and clogging in deionized water than salty water, and (3) the critical clogging concentration of kaolin in multiphase fluid flow is lower than in singlephase fluid flow. Therefore, clustering and clogging of kaolin within pore occur easily due to desalination and multiphase fluid flow when methane is produced from hydrates, and the efficiency of methane production is expected to decrease due to the degradation of permeability coefficient.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.33-41
• /
• 2018

Soil internal erosion is a phenomenon in which fines attached to the solid skeleton are detached by fluid flow, and this continuous fine migration weakens the hydro-mechanical characteristics of the ground structure. This paper proposed governing equations for fine migration in pore spaces and its related scheme for the numerical analysis. Phase diagram for fine particles includes three different states: detached fines in the liquid phase ($c_e$), attached fines in the solid phase (${\sigma}_a$), and pore-clogged fines in the solid phase (${\sigma}_s$). Numerical formulations for finite element method are developed based on the hydraulic governing equations of pore fluid and fine migration. This study proposed a method of estimating model parameters for fine detachment, attachment, and clogging from 1D erosion experiments. And it proposed an analytical formula for hydraulic permeability function considering fine clogging. Numerical analysis of the previous erosion test developed the numerical scheme and verified the adequacy of fine migration models.