• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.757-760
• /
• 2004

Shaking beam을 이용한 초음파 선형모터는 모터 구동부에서 발생하는 타원궤적이 선형 slider 와 마찰이 되어 선형운동을 발생시킨다. 이러한 초음파 선형모터에서 설계변수는 모터의 효율과 추력(thrust force) 등 동특성을 결정한다. 특히 초음파 모터 동작부의 tip 과 선형 slider 의 contact point와 압착은 모터의 속도, 추력 동작 주파수, 효율에 직접적인 영향을 주는 중요한 parameter 로 작용된다. 본 연구에서는 모터와 선형 slider 의 압착과 contact point둥의 설계변수가 초음파 선형 모터의 성능에 주는 영향을 고찰하였다. 모터으구동부와 선형 slider 사이의 압착력 ($10N{\sim}50N$)과 4가지 곡률을 갖는 tip을 설계변수로 취하였다. Tip 의 형태에 따른 곡률과 모터 구동부와 선형 slider 사이의 압착력 변화에 따른 모터의 동작특성이 변화되는 것을 확인할 수 있었다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.71-76
• /
• 2007

The fatalities of pedestrian account for about 40.0% of all fatalities in Korea 2005. Vehicle-Pedestrian accident generates trajectory of pedestrian. In pedestrian involved accident, the most important data to inspect accident is throw distance of pedestrian. The throw distance of pedestrian can be influenced by many variables. The variables that influence trajectory of pedestrian can be classified into vehicular factors, pedestrian factors, and road factors. Vehicular factors are the frontal shape of vehicle, impact speed of vehicle, the offset of impact point. Many studies have been done about the relation between impact speed and throw distance of pedestrian. But the influence of the offset of impact point was neglected. The influence of the offset of impact point was analyzed by Working Model, and the trajectory of pedestrian, dynamic characteristics of multi-body were analyzed by PC-CRASH, a kinetic analysis program for a traffic accident. Based on the results, the increase of offset reduced the throw distance of pedestrian. However box type vehicle just like bus, the offset of impact point did not influence the throw distance of pedestrian considerably.

• Composites Research
• /
• v.12 no.5
• /
• pp.12-22
• /
• 1999

Aluminum based metal matrix composites(MMCs) are well known for their high specific strength, stiffness and hardness. They are gaining further importance because of their high wear resistance. In this study wear behavior of $Al/Al_2O_3/C$ hybrid MMCs fabricated by squeeze infiltration method was characterized by the abrasive wear test under various sliding speeds at room and high temperature. Wear resistance of MMCs was improved due to the presence of reinforcements at high sliding speed. Especially wear resistance of carbon hybrid MMCs was superior to other materials because of its solid lubrication of carbon. The friction coefficient of MMCs was not affected by the sliding speed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1345-1349
• /
• 2004

하천수를 취수원으로 하는 우리나라의 많은 취수장의 경우, 유사유입 및 유로 변경에 따른 취수장애를 겪고 있으나 유로의 변화특성을 분석하고 취수장 위치선정에 활용한 수 있는 실무적 기법에 대한 연구는 거의 없는 실정이다. 따라서 본 연구에서는 유로가 좌${\cdot}$우안으로 수시로 바뀌어 갈수기는 물론 평수기에도 취수장애를 겪고 있어 대책 강구가 요구되는 국내 취수장을 선정하고 취수지점의 계속적인 하상 및 유로변동 현상을 규명하여 안정적인 취수를 가능케 하는 근본적인 대책을 수립하기 위한 유로변화 특성 분석기법을 제시하였다. 연구내용으로는 과거 30여년에 걸친 하도의 평면학적 변화양상을 인공위성영상자료, 지형도자료 및 하도단면 실측자료를 활용하여 각 지점별 유로변화에 대한 동계분석을 실시하였다. 또한 하도의 전단응력, 마찰 속도 등을 산정하여 하상형태를 분석하여 대상구간의 흐름특성을 분석하였다. 분석결과 하도의 사행은 지속적으로 진행되고 있음을 알 수 있으며 특히 취수장부터 상류 수km구간 하도에서는 밤섬이 지속적으로 생긴다 사라지는 현상이 반복되고 있음을 확인할 수 있었다. 취수장 주변에서는 유로의 변동이 하폭의 $70\%$에 달하는 심한 유로변화 특성을 나타내고 있어 취수지점으로 적당치 못함을 알수 있었으며 주변 상하류 십수 km구간 중에는 유로의 변화가 거의 없는 구간도 존재함을 알 수 있이 본 연구의 유로변화 분석기법이 향후 유로변화 분석 및 취수장 건설 위치 선정에 효과적인 분석기법으로 활용 가능함을 입증하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.3
• /
• pp.15-20
• /
• 2013

The graphites as airtight structure seals prevent high-pressure and high-temperature gas from flowing into actuator of propulsion system and generate lubricant film during wear procedure to assist lubricant and sealing. In this study, the tribological characteristics of the graphite in high-temperature are evaluated. In order to evaluate the tribological characteristics of high density graphite(HK-6), variables which are temperature, sliding speed and contact load are set. this study suggest optimized environment conditions through the wear properties of graphite. Consequeantly, high temperature is better than at room temperature to generate lubricant film, so that friction coefficient of graphite is lower at high temperature than at room temperature.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.469-471
• /
• 2010

Supercavitating vehicles which cruise under water undergo high longitudinal force caused by thrust and drag. These combination may cause structural buckling. Static and dynamic buckling analysis method by using FEM can be used to predict this structural failure behavior. In this paper, some principles which include method for solution eigenvalue problem for buckling analysis are introduced. And before buckling analysis, we predicted some mode shape and natural frequency of cylindrical shell by using DIAMOND/IPSAP eigen-solver.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.520-526
• /
• 2016

Squeal noise is a typical brake noise that is annoying to both passengers and pedestrians. Its frequency range is fairly wide from 1 kHz to 18 kHz, which can be distressful to people. The brake squeal noise occurs due to various mechanisms, such as the mode coupling of the brake system, self-excited vibration, unstable wear, and others. In this study, several parameters involved in the generation of a squeal noise are investigated experimentally by using a brake noise dynamometer. The speed, caliper pressure, torque, and friction coefficient are measured as functions of time on the dynamometer. The contact pressure and temperature distributions of the disc and the pad are also measured by using a thermal imaging camera and a pressure mapping system. As a result of the simultaneous measurement of the friction coefficient and squeal amplitude as functions of the velocity, it is found that the onset of the squeal may be predicted from the ${\mu}-v$ curve. It is also found that a non-uniform contact pressure causes instability and, in turn, a squeal. Based on the analysis results, design modifications of the pad are suggested for improved noise characteristics.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.11a
• /
• pp.214-217
• /
• 2022

2018 년 평창 동계올림픽부터 우리나라 사람들이 컬링이라는 종목에 큰 관심을 갖기 시작하였다. 하지만 이 종목을 직접 체험하거나 경기를 보기 위해서는 빙판이 있어야 하는 특수성과 비싼 장비, 찾아보기 힘든 경기장 등 여러 열악한 조건들 때문에 결국 올림픽 시즌에만 반짝 관심을 가졌다가 시들어버렸다. 이를 해결하기 위해서 우리는 Unity 라는 게임 엔진을 사용하여 사람들이 쉽게 접할 수 있는 컬링 게임을 제작하였다. 실제 컬링을 게임으로 만들기 위해 컬링에 필요한 도구들을 이미지로 제작하여 Unity 내부에서 저장 후 오브젝트에 입력하였고 물리 법칙을 구현하기 위해 Unity 상에서 방향, 세기, 속도, 충돌들을 프로그래밍하였으며 대한컬링연맹에 나와있는 컬링 경기 규칙서를 활용하여 게임에 적용하였다. 또한 컬링의 진행이 현실적인 운동과 비슷하게 하기 위하여 스크립트 안의 충돌 및 마찰 관련 계수를 조절하였고 이를 이용하여 반복한 결과값들을 수치화 하여 그래프로 작성해보았다. 추가적으로 컬링 게임의 점수판과 카메라 시점 등을 통해서 게임 사용자가 게임 진행에 있어서 도움이 되는 부분을 구현하였고 현실성을 위하여 Arduino 를 이용한 게임 패드를 제작하여 직접 게임하는 듯한 느낌을 들도록 하였다. 최종적으로 게임을 이용하여 컬링에 대한 이해도가 증가하고 사람들이 컬링이라는 비인기 종목에 한 걸음 더 접근할 수 있게 되고, 스포츠발전에 조금이나마 기여할 수 있게 될 것이다.

• Journal of Korea Water Resources Association
• /
• v.43 no.7
• /
• pp.657-666
• /
• 2010

The adjustment processes of mining pits in the disturbed channels by sand or gravel mining were investigated by laboratory experiments in this study. The pit migrated with speed when the river bed was steep. The pit migrated slow and steady when the pit was filling with sand, but the pit migrated with speed after the filling processes was finished. The submerged angle of repose in the pit was nearly constant during the pit was filling. The pit was filled with sand with speed as the channel slope was increased. It took time for the pit to be filled with sand as the pit dimension was increased. This meant that the disturbed channels by sand or gravel mining to adjust the new environment was dependent on the slope of the channels and the dimension of the pits. The dimensionless pit length was short and the dimensionless pit depth was shallow as the time was increased. The dimensionless pit depth was shallow, but the dimensionless pit migration speed was increased as the dimensionless shear velocity and the migration speed of the pit were increased. The dimensionless pit depth was increased with the dimensionless bar migration speed. The shape of the pit was deformed and migrated downstream in accordance with the location and shape of the biased bar front which was developed upstream.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.1
• /
• pp.67-74
• /
• 2019

Frost heave is one of the representative engineering characteristics in cold regions. In South Korea, which is located in seasonal frost area, structural damage caused by frost heave and thaw happens and the need for research on the frost heave is increasing. In this paper, newly developed transparent temperature-controllable cell is used to focus on the frost heave. Frost susceptible artificial soil is used to analyze water intake rate which is one of the important factors in frost susceptibility criteria. Frost heave rate and water intake rate have similar behavior after heave by freezing of pore water converges. O-ring installed in the upper pedestal to measure water intake rate generates side friction between the inner wall of the freezing cell and O-ring, thereby hindering frost heave. Therefore, the frost susceptibility criteria using the water intake rate is not reliable. It is appropriate to use frost heave rate which has similar behavior with water intake rate. Frost heave tests were performed under two different specimen heights. Overburden pressure, temperature gradient and dry unit weight were set under similar state. Based on laboratory testing results, frost heave is independent on the specimen height.