• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.585-591
• /
• 2017

Turbocharging is widely used in diesel and gasoline engines as an effective way to reduce fuel consumption. But turbochargers have turbo-lag due to mechanical friction losses. Bearing friction losses are a major cause of mechanical friction losses and are particularly intensified in the lower speed range of the engine. Current turbochargers mostly use oil bearings (two journal bearings and one thrust bearing). In this study, we focus on the bearing friction in the lower speed range. Experimental equipment was made using a drive motor, load cell, magnetic coupling, and oil control system. We measured the friction losses of the turbocharger while considering the influence of the rotation speed, oil temperature, and pressure. The friction power losses increased exponentially when the turbocharger speed increased.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.54-59
• /
• 2001

본 연구는 청각적 감성을 만족시키는 의류소재의 개발을 위해, 직물 마찰음에 대한 인간의 감서을 생리반응측정과 심리적·주관적 평가를 통해 파악하고, 직물 마찰음이 갖는 음향특성과의 관련성을 고찰하였다. 이를 위해 직물 마찰음의 음향특성을 분석하고, 직물 마찰음에 대한 감각·감성 표현어(부드러움, 시끄러움, 유쾌함, 날카로움, 맑음, 거침, 높음)를 이용하여 주관적 평가를 실시하였으며, 생리적 반응으로서의 뇌파 및 혈류량, 심박변화율, 피부전도수준 등을 측정하였다. 주관적 감각·감성은 대부분 직물 소리의 크기와 관련이 깊은 것으로 나타나, loudness(Z)와 총음압 LPT가 증가할수록 시끄럽고 거칠며 딱딱하고 불쾌하며 탁하다고 지각하였다. 생리적 반응과 관련하여서는, 부드럽고 조용하며 맑다고 지각할수록 slow alpha파가 증가하였고, 유쾌하고 매끄럽다고 평가할수록 혈류량은 증가하였다. 또한, 높다고 지각하는 소리에 대한 LF/HF는 증가하였다. 마찰음의 음향특성이 생리적 반응에 미치는 영향으로서, LPT가 혈류량의 감소에, Loudness(Z)가 피부전도수준의 증가에 각각 영향을 미치며, sharpness(Z)가 높고 ΔL이 작을수록 LF/HF는 증가하는 것으로 나타났다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06a
• /
• pp.37-47
• /
• 1995

본 논문은 마찰력을 측정하는 시스템에 동특성 변화를 주어서, 이에 의해 발생하는 마찰현상의 변화와 수직하중의 변동특성에 관하여 측정을 하였으며, 미끄럼속도 및 하중조건 변화와 미끄럼운동을 하는 두물체 재료조합 변화에 따른 상기의 마찰특성변화에 관하여 실험적 및 이론적 고찰을 행하였다. 시스템의 동특성 변화를 주기 위하여 시스템의 강성(Stiffness)의 변화를 주었고, 또한 수직 하중 부과 방법을 Dead weight를 이용한 방법과 공압(Pneumatic)에 의한 방법을 비교함으로써 관성력 및 감쇠(Damping) 특성에 변화를 주었다. 시험 대상의 물체들은 강(Steel) 및 폴리머류의 Rosin과 PTFE를 선정하여, 재료변화에 따른 마찰특성 변화를 유도하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.213-219
• /
• 2021

Polytetrafluoroethylene (PTFE) is a commercialized friction material in friction pendulum systems used for earthquake hazard mitigation in structures, and it has excellent chemical resistance and frictional performance. However, PTFE has a relatively low wear resistance for the friction pendulum systems in service. As an alternative to PTFE, a cost-effective frictional material, polyvinylidene fluoride (PVDF) strengthened by magnesium oxide (MgO), with enhanced wear resistance performance is proposed in this study. The frictional performance of the developed PVDF/MgO was evaluated through experiments and compared with that of PTFE. Accordingly, a friction pendulum system was designed using the measured friction coefficient. The performance of this friction pendulum system was evaluated via nonlinear time history analyses of bridges. Subsequently, the plausibility of using PVDF/MgO as an alternative to PTFE as a friction material for friction pendulum systems was discussed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.30-34
• /
• 1996

자동차용 마찰재의 원료로 사용되는 고체 윤활제($Sb_{2}S_{3}$)와 연마재(ZrSiO$){4}$)의 상대량이 다른 3가지의 마찰재를 제조하여 그들의 마찰특성을 자동차용 Brake Dynamometer를 사용하여 연구하였다. 각각의 마찰재에 관하여 자동차 제동시에 나타나는 마찰계수의 변화와 Torque 변화 그리고 시험후의 마찰재와 rotor의 마모량을 측정하였다. 제동특성과 직접 관련 있는 것으로 알려져있는 마찰계수의 안정성은 $Sb_{2}S_{3}$이 상대량이 높을 때 좋은 특성을 나타내었으며, 반면에 ZrSiO$_{4}$의 상대량이 많은 경우에는 마찰계수의 안정성이 저하되었을 뿐 아니라 제동시의 torque 변화량도 증가하여, 자동차의 Judder현상을 해결하는데 좋지않은 경향을 나타내었다. 이는 마찰시에 계면에 형성되는 윤활막의 거동에 의한 현상이며 이때 마찰재 및 상대재의 마모량은 연마재의 양이 증가함에 따라 마모량이 증가 하였다.

• Tribology and Lubricants
• /
• v.13 no.2
• /
• pp.1-7
• /
• 1997

나는 12월의 첫째주를 두려워 했다. 그것은 나를 우울하게 하는 보스턴의 진눈깨비 섞인 이슬비나 어둠, 그리고 붐비는 휴일의 쇼핑몰의 주차전쟁같은 것은 아니었다. 그 주가 응축 물질 연구 물리학자들의 모임인 미국물리학회의 3월 총회에 제출할 논문 초록의 마감 시한이기 때문이다. 1986년에 나는 나의 대학 동료 Allan Widom과 함께 고체 평면을 따라서 미끄러지는 한 원자 두께 필름의 마찰력을 측정할 수 있는 실험 기술을 개발했다. 문제는 나의 원자단위의 마찰 초록을 3월 총회의 수많은 논문들 중 어디에 분류해야 할지 알수 없다는 것이었다. 마찰에 대한 연구가 없었던 것은 아니었다. 나는 항상 거시적 마찰이나 나노미터 단위의 마찰에 대한 회의인 다중성향의 미국진공학회로부터 환영을 받았다. 그러나 주류의 물리학자들은 그 주제에 아무 관심이 없었다. 거의 대부분의 사람들은 마찰이란 단순히 표면의 울퉁불퉁함에 관계된다고 생각했다. 마찰이 경제에 미치는 영향 또는 일상생활에서 느끼는 마찰의 친숙함을 생각한다면 사람들은 더욱 마찰에 대한 관심을 가졌었을 것이다.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.41-48
• /
• 2012

In this study the negative skin friction test of foundation pile was performed in order to monitor the negative skin frictional force acting on the steel pipe pile installed in soft soil. The monitored frictional stresses obtained from the long-term loading test. Through the long-term frictional stress monitoring test, the economical period for the construction of the superstructure was determined. The following conclusion were derived from this study: (1) In soft soil, negative skin friction increases with the increase in the rate of settlement. (2) In the friction relationship graph, the period where there is no frictional strain increase is verified and the time for the construction of the superstructure is determined. (3) The pile loading test was performed and the negative skin friction was compared with the test results. It was determined that the negative skin friction after driving was larger than the negative skin friction obtained from the loading test. 15 days after the construction, the monitored value was similar with the theoretical data. (4) It was determined that even during the occurrence of negative skin friction an economical construction management can be performed using the long-term monitoring method of negative skin friction.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.131-137
• /
• 2010

In this paper, overseas criteria and research results were reviewed to develop a rational criterion proper to domestic airport runways on measurement of friction coefficient and removal of rubber deposit. The friction coefficients of the runways of the Incheon International Airport were measured by the ASFT(Airport Surface Friction Tester) from August 2007 to July 2009 and the data at intensively landed points were analyzed. Variation of the friction coefficient due to accumulation and removal of tire rubber was analyzed and seasonal influence on the variation were investigated by pavement types. The friction coefficient steadily decreased over a long term despite periodical removal of the rubber deposits. The variation of the friction coefficient in summer was larger than other seasons and asphalt pavement was more sensitive to the seasonal influence than concrete pavement. The friction coefficient of the asphalt pavement with macro texture was even larger than that of early age concrete pavement with micro texture. The variation of the friction coefficient of the asphalt pavement due to the deposit and removal of the tire rubber was also larger than that of the concrete pavement.

• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.69-82
• /
• 1999

Direct shear tests are perfromed for artifical joint models made of cement with 25 types of different strength and roughness. The tests consist of the multi-stage test which is a common test method for a single joint plane and the test method suggested by ISRM. Then, not only the differences of friction angles between the two test methods are compared, but is the effectiveness of the multi-stage test investigated. The average of friction angles measured from the multi-stage test is $6.4^{\circ}$ lower than that from the ISRM test. Although the strength and roughness of samples vary, the differences of friction angles between the two test methods are constant. The relationship between the shear stress and the normal stress measured from the multi-stage test is well correlate with the Patton's equation. Whereas, the Barton's equation is best fitted with those measured from ISRM test.

• Science of Emotion and Sensibility
• /
• v.14 no.2
• /
• pp.191-196
• /
• 2011

Fabric extraction force measured through nozzle tester reflects a comprehensive fabric handle. Nozzle tester takes advantage of low cost, and simple and fast operating procedure compared with KES system. The paper is to develop the semi-emprical equation for assessment of the fabric handle measured with nozzle tester on the basis of friction law. The variables considered in the equation arc fabric's frictional coefficient and drape coefficient which is determined in terms of fabric bending length and shear strain. The experiment of 12 different cotton and polyester fabrics and comparisons between experimental and theoretical results were conducted. Fabrics of high frictional coefficients, high bending length, and low shear strain showed high fabric handle forces (low handle values). The handle forces predicted from the equation agreed well with those measured, which indicates that the equation can be used to objectively evaluate fabric handle with respect to fabric's own properties and also provide an information for fabric design to improve the handle performance.