• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.102-107
• /
• 2006

This study investigates the properties as the difference friction welding area on SM25C steel rod. The tensile and bending strength and of welded joints, the hardness distribution of welds, the microstructure of welds and the tensile fracture surfaces were mainly investigated through this experiment. The fixed friction welding conditions were revolution 2000rpm, friction pressure 70Mpa, friction time 1.5sec, upset pressure 100Mpa, upset time 2.0sec, upset length 2.8mm and changeable friction welding parameter was friction welding area.

• Journal of Energy Engineering
• /
• v.9 no.2
• /
• pp.102-108
• /
• 2000

난류상태로 유동중인 고분자 수용액은 순수 용매만의 경우에 비교할 때 동일유량에서 초기에 높은 마찰 저항감소효과를 보이며, 이러한 마찰저항감소효과는 펌프의 펌핑능력 증대로 큰 경제적 이익을 가져다준다. 그러나, 고분자 수용액은 그 극적인 마찰저항감소효과에도 불구하고 유동중에 가해지는 기계적 에너지, 열에너지 등에 의해서 초기의 높은 마찰저항감소효과를 점차적으로 상실하게 되기 때문에, 고분자 수용액의 퇴화를 완화시키기위한 연구가 필요하다. 따라서 본 연구에서는 기계적 퇴화특성이 비교적 강한 합성고분자와 계면활성제의 농도합계를 100wpm 으로 고정하고 비율을 11가지로 세분화하여 , 1$0^{\circ}C$의 온도에서 유속 1.5m/sec , 3.0m/sec 및 4.5m/sec 에 대한 퇴화경향을 알아보는 실험을 수행하였으며, 각 조건에서 합성고분자와 계면활성제의 적정비율을 관찰하였다. 실험 결과, 각 속도에서 시간에 따른 퇴화경향은 고속에서 기계적 에너지에 대한 퇴화를 볼 수 있었고, 계면활성제와 합성고분자를 혼합하여 첨가했을 경우 저온에서도 퇴화완화효과가 있음을 확인하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.4
• /
• pp.131-136
• /
• 2000

This study deals with the mechanical properties of STS304-Al351 friction welding zone. Main results are as follows ; under the condition of upset pressure 75MPa, the tensile strength of STS304-al6351 friction weld interface was higher than that of Al6351 base metal, and the highest tensile strength(290MPa) was obtained at upset pressure 125MPa. The hardness profile across the weld interface shows that the hardness of both STS304 and Al6351 is higher around the weld interface, and sharply increased hardness on the STS304 side is related with the plastic deformation of micro volume. As the result of analyzing the tensile fracture, it showed perfect soft fracture.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.11
• /
• pp.1075-1080
• /
• 2010

For the aeroelastic analysis of a wing with friction damping, coupled time integration method was used to obtain time responses in the subsonic and transonic regions. To take into account aerodynamic nonlinearity induced by shock wave on the lifting surface, transonic small disturbance equation with in-phase periodic boundary condition was used for unsteady aerodynamic calculation. For 2-DOF airfoil system with displace-dependent friction dampers, the effects of normal load slope and Mach number on flutter boundary were investigated.

• Science of Emotion and Sensibility
• /
• v.8 no.4
• /
• pp.385-391
• /
• 2005

A frictional coefficients of in-vivo skin characteristic is the most important factor of the cutaneous mechanical properties ant the method of evaluating skin care in the fields of cosmetics products. In-vivo skin characteristic varies in many different ways depends on what is applied to the skin, loading condition, shape, surface roughness, and material of the probe. In this research, we designed a system which can be measured frictional coefficients of a human skin on real time. It consists of multi-components load-cell, actuator, linear motor and arm fixator. This measurement system was automatically controlled by computer. We measured frictional coefficients between probe an4 skin using this system ant inquired adjectives for subjective evaluation while rubbing cosmetic product on skin. Lastly, we analyzed correlation between two factors by calculating Pearson Correlation Coefficient. As a result, we could know that frictional coefficients varied from 0.17-1.2 according to cosmetic products, normal forte, materials and surface conditions of probe. We also confirmed sensual feelings of cosmetic products have close correlation with frictional coefficients.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.5
• /
• pp.27-35
• /
• 1991

음소를 인식의 기본 단위로 하는 소규모 음성 인식 시스템을 구현하기 위한 기초 연구로서 마 찰음(/ㅅ, ㅆ, ㅎ/) 과 파찰음(/ㅈ, ㅉ, ㅊ/) 에 대하여 지속시간, 평균패턴, 분산비를 이용하여 각 음소 의 특징을 분석하고 각 음소군 내에서의 식별에 유효한 parameter들을 추출하여 인식 실험을 실시하 였다. 지속시간의 분포, 평균패턴의 분포, 분산비의 분포를 이용하여 분석한 결과 6차원 정도의 cepstrum 계수만으로 마찰음 및 파찰음의 식별이 가능하고, 시간 방향의 정보는 음성의 시단으로부터 14 frame 정도의 특징을 인식 파라미터로 할 경우가 최적임을 알 수 있었다. 이를 이용한 인식실험 결과에서는 조음방법별로 분류된 음소군내의 각 음소에 대한 인식실험의 인식률 보다는 발음방법별 인식실험시의 인식률이 높게 나타나 동일 음소군 내에서의 각 음소에 대한 식별이 더 어려움을 알 수 있었고, 특징 파라미터의 길이를 음성의 시단으로부터 14 frame 정도로 했을 때 조음방법별 인식률은 평균 81.1%, 발음방법별 인식률은 평균 97.9%로 최고의 인식률을 나타내었다. 특징 파라미터의 길이 를 14 frame 이상으로 증가시켜도 인식률은 큰 변화가 없어 분석 결과를 잘 설명하고 있음을 알 수 있었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.2
• /
• pp.53-67
• /
• 2008

In this study, seismic control performance of friction dampers installed in a reinforced concrete shear wall-moment frame system, of which main lateral force resisting system is a shear wall, is investigated. Three configurations of friction dampers are investigated. One is a diagonal brace type reinforcing the shear wall directly, another is a diagonal brace type reinforcing the moment frame without the shear wall, and the other one is a vertical boundary element type installed at both ends of the shear wall. In addition, various levels of the total friction force and its distribution methods are examined. Time history analysis considering material nonlinearity is conducted for seismic loads increased by the enhanced design code compared to the initial design loads, and energy dissipation, lateral loads and structural member damages are analyzed. As a result, the shear wall-reinforcing diagonal brace type with the total friction force of 30 % of the reference friction force gives the best performance on the whole, and the distribution methods of the friction force do not have remarkable difference in effects. Also, concentrated installation in adjacent four stories shows just a little compromised control performance compared to the entire story installation.

• The Journal of Engineering Geology
• /
• v.8 no.3
• /
• pp.235-245
• /
• 1998

Adquate friction resistance is needed to prevent pavement slipperiness and to allow vehicles to stop in a reasonable distance. Performance of the aggregates is reduced over time by wear and polishing as a consequence of vehicular traffic. In this research, the objective was to develop a laboratory method to test Indiana gravel aggregates to predict field performance, and determine causes for the range of values amang gravel aggregates. The assessment of gravel sources was primarily on the basis of individual rock types and those proportions comprising the gravel. Polish and friction values were determined in the laboratory with the British Wheel and Pendulum. The gravels of this study were composed primarily of carbonate aggregates that showed considerable variability in polishing thresholds. Igneous and metamorphic constituents polished to a lesser degree and are expected to improve overall aggregate performance. Estimates of the IFV (Initial Friction Value) and PV (Polished Value) for crushed gravel samples can be made based on the percentage of rock types present in the sample. A weighted average is used to make this calculation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.347-352
• /
• 2018

This study proposes seismic response analysis technique of a two-mass rack system which sustains heavy loads with frictional behavioral characteristics. In order to deal with the nonlinear frictional characteristics of the mass on the rack system, the equations of motion of the system has been derived and the appropriate numerical simulation technique has been developed. In order to examine the seismic performance of the proposed system, we consider two parameters that are expected to have great influence on the seismic performance of the system. One is the ratio of the two masses of the load and the rack structure, and the other is the friction coefficient between rack and loaded mass. A number of numerical simulations of the seismic response of structures with various natural frequencies for both parameters have been performed in order to investigate the seismic safety of the rack structures. From the simulated results. it is observed that the maximum displacement of the rack system tends to decrease drastically as the natural frequency of the structure increases regardless of the two parameters of mass ratio and friction coefficient. The proposed study provides important reference data to guarantee the seismic safety of the rack system by considering nonlinear frictional behavior of the loaded mass.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.90-98
• /
• 1997

A copper-tungsten sintered alloy(Cu-W) has been friction welded to a tough pitch copper in order to investigate the effect of friction pressure on bonding strength and a charicteristic of fracture. The tensile strength of the friction welded joint was increased up to 90% of the Cu base metal under the condition of friction time 1.2 sec, friction pressure 4.5kgf/$\textrm{mm}^2$ and upset pressure 10kgf/$\textrm{mm}^2$. From the results of fracture surface analysis, the increase of friction pressure could remarkably decrease the force and the time to be normally acted on weld interface. The W particles which were included in the plastic zone of Cu side could induce fracture adjacent to the weld interface because their existance in Cu induces a decrease in available section area and an increase in notch effect. Therefore, the tensile strength was decreased at high friction pressure (6kgf/$\textrm{mm}^2$) because the destruction of W was increased by an increase in mechanical force and crack was formed at weld interface.