• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.1
• /
• pp.25-33
• /
• 2020

In this study, parametric analyses are performed using the coupled Eulerian-Lagrangian scheme for the collision behaviors of a vessel and an underwater slope that constitutes part of an artificial protective island. The vessel parameters considered in the analysis are bow angle, stem angle, draft, and impact velocity. The gradient of the slope, the friction coefficient between the bow and the slope, and soil strength are considered as parameters of the slope. For each parameter, the dissipated collision energy and the collision force are estimated from the behavior of the vessel, and the energy dissipation mechanism is identified in terms of the ground deformation. The collision force is assumed as an exponential function, and the effects of the parameters are estimated. As a result, only two parameters, the gradient of the slope and the friction coefficient between the vessel and the soil, can affect the exponential coefficient of the function. The dissipated energy by the soil can thus be estimated adequately. The relationship between the volume of the soil pushed out by the bow and the dissipated collision energy is estimated as a linear function. This relationship is independent of the magnitude of the collision energy, and affected more by the friction coefficient and the soil strength than by the parameters of the vessel.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1897-1901
• /
• 2010

이동식 전자파표면유속계를 이용한 홍수유량의 산정을 위해서 임의의 유량측정지점에서 측정한 표면유속 값에 수심평균유속환산계수 0.85를 적용하여 그 지점의 평균유속을 계산하고 있다. 이로 인해 각 지점에서 흐름조건 및 기상학적으로 요인으로 인한 이 계수의 변동성을 고려하지 않은 상태로 유량을 산정하게 되어 각 흐름조건을 고려한 유량산정을 할 수 없는 실정이다. 이에 하천 현장에서 표면유속과 수심별유속의 실측 자료를 이용하여 흐름조건에 따른 표면유속과 평균유속의 관계를 파악하고자 하였다. 이를 위하여 용담 수자원시험유역의 동향지점에서 하천을 횡단하며 바닥에서 수표면까지 수심방향으로 0.05~0.10 m의 간격으로 프로펠러 유속계를 이용하여 정밀법으로 각 수심에서의 유속을 측정하였다. 정밀측정된 수심별 유속을 이용하여 평균유속을 산정하고 이를 수체 (water column)의 가장 최상층에서 측정한 유속을 표면유속으로 가정한후 이로부터 수심평균유속환산계수를 산정하여 흐름조건에 따른 계수의 변화를 조사하였다. 하천 현장에서 흐름조건의 변화에 따른 표면유속과 수심별유속의 정밀측정을 통한 이들 깊이별 유속의 변화여부를 용담수자원시험유역의 동향지점에서 현장조사를 실시하였다. 측정당시 풍속이 느려서 (1.5~3.1 m/s) 바람으로 인한 유속에 미치는 영향이 수심별 유속분포상으로는 거의 나타나지 않았다. 다만 양안에서 평균유속과 표면유속이 역전되는 현상이 발생되었는데 이는 벽면 마찰에 바닥마찰의 영향이 추가됨에 따른 것으로 판단된다. 수심별 유속측정 결과를 전체적으로 분석한 결과 환산계수가 0.632~1.352로 넓게 분포하고 있다. 환산계수가 1.0 이상인 경우는 양안에 인접한 두 지점인데, 이들 두 경우는 유속분포가 이론적인 유속분포와는 상반된 유속이 측정 - 표면유속이 수심평균유속보다 느림 - 되었다. 환산계수가 0.6~0.8 사이에서 형성된 경우는 표면유속이 평균유속보다 25~55% 정도 빠르게 나타나고 있다. 전제 측정결과를 검토해보면, 전반적으로 양안에 인접한 측선에서 표면유속이 평균유속보다 느려지는 현상이 나타나고 있다. 또한 유속이 1.0 m/s 이상인 경우에 0.677~0.790의 환산계수 값을 보이는데 이 경우 수심이 50 cm 이하여서 바닥마찰의 영향이 큰 것으로 판단된다. 다양한 흐름조건별 표면유속과 수심별유속의 측정을 할 수 있는 현장여건 - 유속, 수위 등의 동일흐름 조건에 대해서 -에 많은 부분이 제약되어 이의 정밀분석이 힘든 실정이다. 따라서 이러한 현장측정시의 제약성을 극복하기 위해서 여러 가지 흐름조건을 구현할 수 있는 정밀제어가 가능한 실내실험장치를 이용한 면밀한 분석이 필요하다.

• Tunnel and Underground Space
• /
• v.30 no.2
• /
• pp.164-179
• /
• 2020

Applying the limit state design method to geotechnical structures, accuracy and reliability of its design are mainly affected by parameters for geotechnical site characteristics, such as unit weight, Poisson's ratio, deformation modulus, cohesion and frictional angle. When the structures are located in weathered ground, especially, cohesion and frictional angle of ground are closely related with decision of parameters for structures' load and ground's resistance. Therefore, the accurate determination of these parameters, which are commonly obtained from field measurement, such as borehole shear test, are essential for optimum design of geotechnical structures. The 38 case studies, in this study, have been analyzed for understanding the importance of these parameters in designing the ground structures. From these results, importance of field measurement was also ascertained. With these evaluations, an apparatus for determining the strength characteristics, which are fundamental in limit state design (LSD) method, have been newly developed. This apparatus has an improved function as following the ASTM suggestion. Through the field application of this apparatus, the strong point of minimizing the possibility of error occurrence during the measurement has been verified and authors summarized that the essential parameters for LSD can be qualitatively obtained by this apparatus for determination of strength characteristics of weathered ground.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.3
• /
• pp.11-22
• /
• 2019

This study was conducted to identify the causes of the unusually high number of rock slope failures during an expressway construction in Yangsan fault system. The shear strength (cohesion and internal friction angle) of 128 slopes of discontinuities including bedding, joint, and fault planes were re-evaluated through the examination of face mapping and back analysis. The re-evaluated values were analyzed and then compared with the existing data and values used in the design. As a result, the re-evaluated cohesion and friction angles were very low compared to the existing data and the values applied in the design. This incongruity was pointed as the primary reason for the rock slopes failures during the construction. This may be related to the inherent features of clastic sedimentary rocks in the study area, and the discontinuities in the sedimentary rocks in this region played a significant role. Especially, bedding discontinuity showed a big difference compared to the existing data. The shear strength depended on the type of discontinuity in case of clay filled in discontinuity. However, shear strength was independent on the type of discontinuity in case of shattered materials filled in discontinuity.

• Phonetics and Speech Sciences
• /
• v.14 no.2
• /
• pp.67-76
• /
• 2022

This study aimed to examine Korean listeners' mode of perceiving sound duration as prolongation, whether dichotomous or continuous. Thirty-five Korean participants (17 men and 18 women) listened to the Korean segment /s/, which was lengthened by 0-980ms in 20-ms increments. Then, the participants were asked to rate each version of the sound based on a rating of one to 100 (the closer to 100, the more disfluent). To examine whether listeners perceived durational variations for the fricative segment dichotomously or continuously, a curve was estimated using the best-fitting regression model for the observed data with the highest adjusted R-squared value. The mode of perceiving durational variations for the segment was continuous (or gradient) rather than discontinuous (or dichotomous). No gender difference was found in the mode of perceiving prolongation. However, there was a significant gender difference in that men rated the most disfluent sounds higher than women. The findings of this study were further discussed in relation to the existing literature, and clinical implications for the assessment of stuttering were presented.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.169-176
• /
• 2024

Purpose: In this paper, an experimental study was conducted to analyze the difference in shear strength caused by the problem of excluding coarse particles due to the size of the test specimen in the direct shear test. Method: A large-scale direct shear test was conducted on three weathered soils containing coarse aggregates with a maximum diameter of 50mm. In addition, a small-scale direct shear test was performed using a sample with a maximum diameter of 5 mm, excluding coarse aggregates. Result: In the case of the small-scale direct shear test, compared to the results of the large-scale direct shear test containing large particles, the internal friction angle was about 2.3% smaller, and there was no significant difference. In terms of cohesion, compared to the large-scale direct shear test, the small-scale direct shear test derived about 80.3% smaller value, showing a relatively large difference. Conclusion: In the large-scale direct shear test, it was analyzed that the coarse particles had a greater impact on the cohesion than the internal friction angle. Therefore, granite weathered clay containing coarse particles is judged to have the same shear strength as the cohesive force that is not affected by vertical stress. In this study, it was analyzed that the small-scale direct shear test, which excludes the coarse particles that are commonly used, provides results on the safety side by excluding the effect of coarse particles.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.295-305
• /
• 2020

Treatment for beauty using oxidizing agents damages hair with inducing structural alteration in cuticle layer, degradation of protein, and loss of lipid. This study connects a frictional coefficient upon the damaged hair by an instrumental test to the texture test by human being, and considered a moisture as a factor of the damage. A friction coefficient has been measured upon the hair with successive treatment of dye, perm, and bleach. The friction coefficient from the hair dye-treated three times was defined with 0.60, where 58% of answerer indicated an initial damage point as the hairs of iteration of dye-treatment increased. Even bleach treated three times results in 0.84 of friction coefficient corresponding to 88% of answerer attributed the hair to an initially damaged hair. In order to figure out a lipid loss in hair for human being to respond damage, a friction coefficient of the hair was controlled by removing 18-methyleicosanoic acid (18-MEA). The initial damage has been recognized by 0.60 of the friction coefficient for the 68% of answerer. Since moisture is the largest portion of the components in hair, moisture analysis has been performed to study a relationship between texture of damage and the friction coefficient from an instrumental evaluation. As an iteration of dye increases, the hair became hydrophilic with smaller contact angle. It is found that a damaged hair by dyeing possessed more than 0.42% of moisture compared to a healthy hair. Finally, it is elucidated that an increase of moisture in hair induced higher adhesive force corresponding to the friction coefficient, and the friction coefficient above 0.6 is attributed to the preception of hair damage.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.1
• /
• pp.49-63
• /
• 2014

Bearing capacity factor $N_{\gamma}$ and shape factor were studied for rigid strip and circular footings with a rough base on sand by numerical modelling considering the effect of dilation angle. The numerical model was developed with an explicit finite difference code. Loading procedures and interpretation methods were devised in order to shorten the running time while eliminating the exaggeration of the reaction caused by the explicit scheme. Using the Mohr-Coulomb plasticity model with associated (${\psi}={\phi}$) and nonassociated (${\psi}$ < ${\phi}$) flow-rules, the bearing capacity factor $N_{\gamma}$ was evaluated for various combinations of internal friction angles and dilation angles. Bearing capacity factor decreased as the dilation angle was reduced from the associated condition. An equation applicable to typical sands was proposed to evaluate the relative bearing capacity for the nonassociated condition compared to the associated condition on which most bearing capacity factor equations are based. The shape factor for the circular footing varied substantially when the plane-strain effect was taken into account for the strip footing. The numerical results of this study showed closer trends with the previous experimental results when the internal friction angle was increased for the strip footing. Discussions are made on the reason that previous equations for the shape factor give different results and recommendations are made for the appropriate design shape factor.

• Tribology and Lubricants
• /
• v.2 no.2
• /
• pp.65-66
• /
• 1986

중공이 성립된것이 1949년 10월이며, 그후 1952년부터 5개년계획의 공업건설이 시작되어, 소련으로 부터 돌아온 연구자와 기술자가 중심이 되어 과학원소층의 연구소 (장춘광학정밀기계연구소 등), 대학((청화대학 등)및 각공업부의 연구소에서 본격적인 연구가 시작되었다. 그후 1962년에 전국 Tribology 회의를 처음으로 난주에서 열고, 100편의 논문이 발표되었다. 그후 중소관계악화, 1965년말에 발표된 문화혁명의 영향을 받아 사실상 연구는 완전히 스톱된 상태가 되고 말았다. 그후 천안문사건, 그리고 사인조실각의 이듬해인 1977년 연구지도등의 명을 받고, 마찰, 마모, 윤활의 연구를 재개하게 되었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.2
• /
• pp.77-81
• /
• 1981

1200.deg.C-1300.deg.C 의 열간 단조작업에서의 강철은 스트레인 속도에 민감하고 그 기계적인 특성방정식은 .delta.=.delta.$_{0}$ .epsilon.$^{m}$ 이다. 이 연구는 열간압출시 필요고 하는 작용력을, 상계이론을 사용하여 해석하고 쟤료의 기계적 특성상수들을 대입하여, 계산한다. 이 결과를 실험치와 비교하고 압출각, 마찰계수, 스트레인 속도와 점성계수등의 일반적인 영향에 대해서도 토의하였다.특히 변형역내의 평균스트레인 속도에 의한 일정 항복용력을 사용하였을 경우에 대해서도 비교 검토되었다.