• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.624-633
• /
• 2018

While the multimedia lecture system has been getting smart using immerging technology, the microphone still relies on the classical approach such as holding in hand or attaching on the body. In this paper, we propose a ceiling mounted array microphone system that allows a wide reception coverage and instructors to move freely without attaching microphone. The proposed system adopts cell and handover of mobile communication instead of a complicated beamforming method and implements a wide range microphone over several cells with low cost. Since the characteristics of unvoiced speech is similar to Pseudo Noise it is shown that soft handover are possible with 3 microphones connected to delay-sum multipath receiver. The proposed system is tested in $6.3{\times}1.5m$ area. For real-time processing the correlation range can be reduced by 82% or more, and the output latency delay can be improved by using the delay adaptive filter.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.6
• /
• pp.563-569
• /
• 2023

Micro light-emitting diodes (LEDs), with a chip size of 100 micrometers or less, have attracted significant attention in flexible displays, augmented reality/virtual reality (AR/VR), and bio-medical applications as next-generation light sources due to their outstanding electrical, optical, and mechanical performance. In the realm of bio-medical devices, it is crucial to transfer tiny micro LED chips onto desired flexible substrates with low precision errors, high speed, and high yield for practical applications on various parts of the human body, including someone's face and organs. This paper aims to introduce a fabrication process for flexible micro LED devices and propose micro LED transfer techniques for cosmetic and medical applications. Flexible micro LED technology holds promise for treating skin disorders, cancers, and neurological diseases.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.6
• /
• pp.42-49
• /
• 2007

In this study, we analyzed flow characteristics of micro-nozzles for basic research to develop micro propulsion system. Cold gas propulsion system was used, and micro-nozzles having nozzle throat diameters of 1.0, 0.5, 0.25 mm were fabricated with EDM method. Thrust was measured through the use of plate-spring and strain gage based thrust measurement system, and flow characteristics of micro-nozzles were analyzed under ambient condition and vacuum condition. We used argon and nitrogen gases as propellant, and compared experimental results with CFD analysis. From the result, we verified the flow losses of viscosity and back-pressure caused by minimization of nozzle.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.237-242
• /
• 2018

A micromixer is a component of a lab-on-a-chip or microfluidic device that mixes two or more chemicals together(convergence). The purpose of this study is to assess the performance of passive micromixer of various shapes. Six shapes of micromixers were compared and three dimensional modeling was carried out to have the same hydraulic diameter. The commercial code, ANSYS Fluent, was used to simulate the internal mixing flow. A numerical analysis method is described in detail in this paper. The performance of the micromixer was compared with the mixing index and pressure drop. Consequently, the CDM-8T shape showed reasonable mixing performance and relatively low pressure drop.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1151-1153
• /
• 1999

3-layer polysilicon 표면미세가공공정을 이용하여 micro zone plate 렌즈와 미러 및 이를 구동하기 위한 구동기를 일체화시킨 마이크로 구동형 광학소자를 설계, 제작하였다. 650nm의 파장대역에서 초점거리가 $500{\mu}m$가 되도록 마이크로 zone plate 렌즈를 설계하였으며, 렌즈의 광학축은 실리콘 기판 상에서 $121{\mu}m$거리에 위치하도록 제작하였다. 마이크로 hinge와 스프링 latch 및 측면지지 plate를 이용하여 마이크로 렌즈와 미러가 실리콘 기판상에서 out-of-plane동작이 가능하도록 하였다. 마이크로렌즈 초점거리의 가변을 위하여 6개의 SDA(Scratch Drive Actuator)어레이를 설계, 제작하였다. 또한 빔 반사를 위한 마이크로 미러를 설계하고 $45^{\circ}$ self-assembly를 위하여 마이크로 hinge와 SDA array를 제작하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.25-29
• /
• 2007

Minimization of conventional propulsion device has been studied for altitude control of micro satellite. We studied micro nozzle performance and found higher significant loss for a micro nozzle with smaller nozzle throat diameter. To overcome this loss, we proposed thermal transpiration based micro propulsion system. This new system has no moving parts and can control flow by temperature gradient, and this can be an option for potential new micro propulsion system.

• 전자공학회논문지 IE
• /
• v.44 no.1
• /
• pp.6-9
• /
• 2007

Twenty four types of thermopile for micro spectrometer infrared sensors were fabricated on low-stress Si3N4 membranes with $l.2{\mu}m-thickness$ using MEMS technology. Thermopile were designed and fabricated for optimum conditions by five parameters of thermocouple numbers $(16\sim48)$, thermocouple line widths $(10{\mu}m-25{\mu}m)$, thermocouple lengths $(100{\mu}m-500{\mu}m)$, membrane areas $(12mm2\sim2.52mm2)$ and junction areas $(150{\mu}m2\sim750{\mu}m2)$, respectively. It was thought that measurement results could be used for thermopile infrared sensors optimum structure for micro spectrometers.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.471-475
• /
• 2013

This study is about photosensitive microspheres prepared by coating alginate microspheres with gelatin-cinnamic acid conjugate. Firstly, alginate microspheres was prepared in water-in-oil (W/O) emulsion and then they were coated with gelatin- cinnamic acid conjugate. Herein, gelatin-cinnamic acid conjugate is obtained by the amidation between an amine group of gelatin and a carboxy group of cinnamic acid. Cinnamic acid is widely used as a photo-responsive material easy to dimerize and dedimeriz under UV irradiation at ${\lambda}$ = 254 nm and ${\lambda}$ = 365 nm, respectively. As shown in SEM-EDS, alginate was successfully coated with gelatin-ciannmic acid. By determining the absorbance of coated microspheres at 270nm, the amount of cinnamic acid per microspheres was 0.13/1. The SEM photos showed the size of coated microspheres is around $10{\mu}m$. And the degrees of dimerization and dedimerization were calculated to be 49% and 23% respectively. Then the release of FITC-dextran from the coated micrspheres was studied and release the degree was 42%. As a result, the coated microspheres have potential to be used as a photo-responsive drug carrier to delivery drugs.

• 기계와재료
• /
• v.26 no.1
• /
• pp.6-15
• /
• 2014

마이크로 가스터빈은 수백 kW의 전기를 생산하는 시스템으로, 최근 천연가스 이용의 확산과 분산 발전에 대한 관심이 증가되면서 기술 개발에 대한 요구가 증가하고 있다. 재생열교환기의 도입과 CHP 시스템 적용을 통해 에너지 효율을 개선하고 각 부품의 가격 경쟁력이 확보된다면, 단위 면적당 출력이 높고, 낮은 공해 물질 배출 특성을 갖는 마이크로 가스터빈은 입지 선정이 용이하고 기존의 도시 가스 공급망을 활용할 수 있다는 측면에서 분산형 발전 시스템의 핵심 역할을 담당할 수 있을 것이다. 이에 마이크로 가스터빈의 기술개발 동향을 소개하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.172-175
• /
• 2000

본 논문에서는 무선마이크용 특정소출력무선기기의 송수신단을 설계하고 제작하여 특성을 측정하였다. 무선마이크용 특정소출력무선기기의 주파수 대역 740.000~752.000MHz를 사용하였고, 점유주락수대폭의 허용치 200kHz, 최대주파수편이 $\pm$75kHz를 만족하도록 설계하였다. PLL Synthesized, 주파수 변조, Dual Conversion 방식을 사용하였으며 Compander Type은 2:1이다. 설계된 무선마이크 시스템의 출력은 10mW이하이고, 50-20,000Hz의 주파수 응답을 가지며 Hi-fi Audio를 전송할 수 있다. 송수신단의 Total Harmonic Distortion 은 1.5% 이하이다.