• 한국추진공학회지
• /
• 제20권3호
• /
• pp.54-62
• /
• 2016

이단 마이크로 할로우 음극 방전(MHCD) 플라즈마를 사용하는 마이크로 플라즈마 추력기(${\mu}PT$)에 대한 실험 연구가 수행되었다. 40 sccm의 아르곤 유량과 10 W 미만의 전력으로 보다 더 직진성 있고 긴 침투 길이를 가진 배기 플룸을 만드는 정전기적 가속이 이단 MHCD에 의해 발생되었다. 전압-전류 특성에서는 이단 운전 시 두 번째 단의 가속 전압이 일정하게 되는 최적 영역이 있음을 보였다. 추정된 배기 플룸의 길이가 가속 전압으로 추산된 이론적 배출 속도와 비슷한 증가 경향을 보였다. 다중 채널을 가진 마이크로 플라즈마 추력기는 동일한 총 전력량에 대하여 단일 채널 추력기와 비슷한 특성을 보여, 이는 채널 당 허용 전력량을 낮춰 전체 전력량을 높일 수 있음을 의미한다. 아르곤 원자 분광선의 볼츠만 그래프에서 배기 플룸의 평균 전자 여기 온도는 약 2.6 eV(=약 30,170 K)임이 확인되었다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.87-90
• /
• 2003

In this paper, flow characteristics of plasma flow in a micro-tube were investigated experimentally using Micro-PIV. For comparision, the experiments were repeated for DI-water instead of plasma. Both velocity profiles of Plasma and DI-water are well agreed with the theoretical velocity distribution of newtonian fluid. We also carried out generating plasma-in-oil droplet formation at a Y-junction microchannel. In order to clarify the hydrodynamic aspects involved in plasma droplet formation. Rhodamin B were mixed with plasma only for visualization of plasma droplet.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.51.1-51.1
• /
• 2005

• 청정기술
• /
• 제13권3호
• /
• pp.195-200
• /
• 2007

본 연구에서는 표면특성에 따른 비균일계 마이크로채널에서의 유속 변화를 조사하였다. 비균일계 마이크로채널은 PDMS와 soft lithography를 사용하여 제작하였고, 마이크로채널의 내부 표면 중 아랫면만을 allyl alcohol로 증착하여 친수성을 띠게 하였다. 채널의 길이는 10, 20, 30 mm, 너비는 100, 200, $300\;{\mu}m$로 각각 제작하였으며, 채널 내 전기영동에 의한 흐름을 생성하기 위해 외부전압을 가해주었다. 그 결과 동일한 세기의 전기장과 밑면의 친수성 정도가 동일할 때 유속은 같았다. 이는 이론적 결과에 부합하고, 연구가 신뢰성이 있다는 것을 뒷받침할 수 있었다. 같은 친수성을 갖는 밑면일 때 채널의 너비가 증가할수록 유속도 증가하고, 친수성 정도가 큰 채널이 작은 채널보다 유속이 빨랐다. 이 결과는 밑면의 친수성 정도에 따라 채널 유속을 조절할 수 있다는 것을 의미한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1462-1465
• /
• 2004

A new method to fabricate metal electrodes on side wall of the microchannel is presented. Coulter counter allows to count the number of cell passing through the microchannel by detecting impedance variation between two electrodes. The relative position of two electrodes is important for sensitivity of impedance measurement. 100nm thick Al electrodes are deposited on the channel side wall by means of shadow evaporation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1876-1881
• /
• 2007

The micro plated heat exchangers were designed to transfer more heat/volume or mass than previous heat exchangers within the context of the design constraints specified. The increase of the surface-to-volume ratio results in an increase of the interfacial area. This enhances considerably the performance of a heat exchanger. This can be an important component in a wide range of applications fuel cell, aerospace, automotive, electronic system and home heating, etc). In this study, the performance evaluation of micro plated heat exchangers under the counter flows with straight and S-shaped channel are carried out. The pressure drop as well as inlet and outlet fluid temperature were measured at steady state under various operating conditions and the total heat transfer rate were also calculated.

• 한국가시화정보학회지
• /
• 제1권2호
• /
• pp.47-51
• /
• 2003

Microfluidic chips such as lab-on-a-chip (LOC) include micro-channels for sample delivery, mixing, reaction, and separation. Pressure driven flow or electro-osmotic flow (EOF) has been usually employed to deliver bio-samples. Having some advantages of easy control, the flow characteristics of EOF in microchannels should be fully understood to effectively control the electro-osmotic pump for bio-sam-pie delivery. In this study, a micro PIV system with an epifluorescence inverted microscope and a cooled CCD was used to measure velocity fields of EOF in a glass microchannel and a PDMS microchannel. The EOF velocity fields were changed with respect to electric charge of seeding particles and microchannel materials used. The EOF has nearly uniform velocity distribution inside the microchannel when pressure gradient effect is negligible. The mean streamwise velocity is nearly proportional to the applied electric field. Glass microchannels give better repeatability in PIV results, compared with PDMS microchannels which are easy to fabricate and more suitable for PIV experiments.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.585-588
• /
• 2008

Thermal mixing phenomena in a Y-type microchannel were investigated using a micro-PIV. Two inlet reservoirs of the microchannel were controlled individually so that the characteristics of thermal mixing in the channel with temperature difference were compared with those without the difference. The velocity field in the mixing process was measured using the micro-PIV system that includes an ICCD (Intensified CCD) camera. The mixing area and uniformity were also analyzed. It is observed that the flow fluctuation in spanwise direction is induced by temperature difference, which enhances mixing process in microchannels.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.302-309
• /
• 2006

Effective mixing plays a crucial role in microfluidics for biochemical applications. Owing to the small device scale and its entailing the low Reynolds number, the mixing in microchannels proceeds very slowly. In this work, we optimize the configuration of obstacles in the Y-channel mixer in order to attain maximum mixing efficiency. Before the optimum design, mixing characteristics are investigated using unstructured grid CFD method. Then, the analysis method is employed to construct the approximate analysis model to be used in the optimization procedure. The main optimization tool in the present work is sequential quadratic programming method. Using this approximate optimization procedure, we may obtain the optimum layout of obstacles in the Y-channel mixer in an efficient manner, which gives the maximum mixing efficiency.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1016-1020
• /
• 2003

In this paper, we present a technology of producing anew chaotic micromixer, named Micromixer with Arranged Blocks(MAB), and the experimental result of the mixing performance. Chaotic mixing was successfully achieved by introducing periodic perturbation in the field of the channel flow by means of slanted blocks. The MAB was made by an RP(Rapid Prototyping) technology. We performed flow visualization experiments for the quantification of the mixing performance with the MAB. Lyapunov exponent was measured to be 0.3557 and 0.1305 for the block height 0.8 and 0.2 times the channel width.