• Journal of Biomedical Engineering Research
• /
• v.10 no.3
• /
• pp.351-360
• /
• 1989

This paper describes the design of portable arrhythmia monitor and associated algorithm for automated diagnosis based-on microcomputer in the ambulatory ECG recording, analysis, and transmitting to a hospital host computer immediately through the telephone system. The device differs from Molter recorder in that it does not store normal ECG signals but captures and alarms the ECG during suspected abnormal periods and selected temporal epochs to a central hospital site. This porta file arrhythmia monitor makes use of a general purpose computer and software will be changed to meet the custom requirements of individual physicians and patients. At present it is very obvious that each cardiologist has his own method of analyzing ECG recordings and utilizes past experience more than the firm quantitative analysis of data.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1481-1484
• /
• 1987

The ALU of CMOS microcomputer have been designed with the 3um design rule for CMOS polysilicon gate and Its cells were layed out. The operation of circuits were simulated with EDAS_P. The widths and lengths of gates In the circuit were determined using SPlCE. The carry delay of the ALU was Improved by Manchester carry method. The results of logic and circuit simulation were in good agreement with expected circuit characteristics.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1268-1270
• /
• 1987

This paper suggests several simple and efficient algorithms for detecting the ECG Signal by Microcomputer's software. The ECG signal detection was performed with the Linear Approximation and the feature extraction. The linear transformation approximates a given waveform by a piecewise-linear function with a preset upper bound on the absolute error between the functional values of the original function and the approximation. And the feature extraction from ECG signal, the features are different wave amplitudes, durations and interwave intervals, used the slope, the amplitude and time-Duration of ECG Sinal.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1499-1502
• /
• 1987

The control part of one-chip microcomputer has been designed with the 3um design rule for CMOS poly silicon gate and Its cells were layed out. The operation of the logic circuits were simulated with EDAS_P. The widths and lengths of circuit were determined by using PSPICE. The control part of microcomputer has designed by using hardwired methode. Results of logic simulation and circuit simulation are in good agreements with expected circuit characteristics.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.130-136
• /
• 2004

We investigate characteristics of viewing resolution improvement in three-dimensional integral imaging, when a dynamic lens array method is adopted. We show that the viewing resolution changes for different moving directions and distances of the lens array through computer-synthesized integral imaging. From this study, optimal moving conditions of the lens array for efficient viewing resolution improvement can be determined.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.10
• /
• pp.1518-1527
• /
• 1989

We proposed a technique to design a multimicrocomputer system for real-time parallel processing with an interconnection network which has good network latency time. In order to simplify the performance evaluation and the design procedure under the hard real-time constraints we defined network latency time which takes into account the queueing delays of the networks. We designed a dynamic interconnection network following the proposed technique, and the simulation results show that we can easily estimate the multimicrocomputer system's approximate performance using the defined network latency time before the actual design, so this definition can help the efficient design of the real-time parallel processing systems.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.455-460
• /
• 2007

본 논문에서는 지능형 주택의 필수 요소 기술의 하나인 사용자 신원을 파악하며 또한 현재 사용자의 위치를 추정하는데 직접적으로 사용이 가능한 방으로의 들어오고 나감 (즉, 출/입 행동)을 감지하는 효과적인 방법을 제안한다. 개발된 시스템은 [1]에 제안되었던 방법을 개선시킨 것으로 초음파 센서 및 PC를 이용하여 만들어졌던 시스템을 8bit 마이크로 컨트롤러를 사용한 임베디드 시스템의 형태로 구현하였다. 이와 더불어 복수개의 센싱 시스템에서 감지한 신호를 블루투스에 기반한 무선 전송 채널을 통해 1개의 중앙 컴퓨터로 전송하는 무선 센서 네트워크를 구성하였다. 이렇게 구성된 센서 네트워크를 통해 각 센싱 모듈이 검출한 사용자 인식 및 인식된 사용자의 출/입 이벤트를 기록, 저장하는 시스템을 구현하였다. 개발된 시스템은 임베디드 시스템의 특성에 적합하도록 기존 PC기반으로 개발된 알고리즘을 수정 개선하였고, 성능 검증을 위해 일반 가정집에 3개의 센싱 모듈을 설치하여 3명의 사용자를 대상으로 실험을 수행하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.4
• /
• pp.153-156
• /
• 1984

A local area network(LAN) controller is designed according to non-persistent CSMA protocols. By meas of a buffer register, a microcomputer interfaces with the LAN controller. To keep bus utilization near the optimal efficiencies, the transmission intervals are adjusted as a function of $2^n$. A message in the form of a packet consisting of 128bytes is transitted to the bus. The maximum transmission rate of 19.2Kbps is obtained at layer 1.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.138-141
• /
• 1989

In resent years, aided by the power and capability of digital computation, the techniques of Walsh Transform have been exploited for applications in commun- ication and signal processing. This paper presents an approach of FWT by using a 16- bit word-length micro- computer. This FWT implements an in-placed decimation-in-sequency algorithm which improves processing speed and memory storage. Several examples illustrate the process and demonstrate the power spectrum of FWT and that of FFT for the waveforms

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.12-15
• /
• 1989

This paper describes the efforts to develop an PC based parameter identification system for the D.C. servomotor. The whole identification process of signal generation, measuring, parameter determination is fully automated. To minimize errors due to the ripple component in the measured armature current, digital averaging filter is employed. The proposed parameter correction method using the deadzone current and the time to reach the peak current resulted in excellent agreement between the measured current and estimated current using the model.