• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.469-470
• /
• 2015

General microstrip patch antenna has small bandwidth. Also this patch antenna is strongly influenced by the thickness of dielectric substrate and its relative permittivity. In this paper, wideband microstrip patch antenna operating in 2.4GHz ISM band is studied. Input impedance and return loss for designed microstrip patch antenna by using MoM method and is estimated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.169-175
• /
• 2006

In this paper, a microstrip patch antenna with the T-shaped slits is designed and fabricated for GPS. The resonant frequency of the microstrip patch antenna with the slits is lower than that of a microstrip patch antenna without the slits so it can be reduced the size of patch. In order to calculate resonant frequency of the microstrip patch antenna with the slits, the resonant frequency formulas are derived from the surface current distribution on microstrip patch antenna. Using the Ensemble 6.0 simulation tool, the accuracy of approximate equations is verified. The microstrip patch antenna with the slits is designed by using these equations. The size of the designed antenna with T-shaped slits can be reduced to 29% compared with that without the slits. The microstrip patch antenna with slits have a very narrow bandwidth. In order to improve the narrow bandwidth of microstrip patch antennas with the slits, a microstrip patch antenna with rectangular slot is proposed. As the result of the measurements, the resonant frequency of the proposed microstrip patch antenna with the T-shaped slits is 1.575GHz and the bandwidth is about 50MHz.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.415-423
• /
• 2019

In this paper, a design method for a high-sensitivity microstrip patch sensor antenna (MPSA) loaded with a bent-slot was studied for the permittivity measurement. The bent-slot similar to a single-ring complementary split ring resonator was added along a radiating edge of the patch in order to enhance the sensitivity to the permittivity. The sensitivity of the proposed MPSA was compared with that of a conventional rectangular MPSA and a thin rectangular-slotted MPSA. Three MPSAs were designed and fabricated on a 0.76-mm-thick RF-35 substrate so that the input reflection coefficient would resonate at 2.5 GHz in the absence of the superstrate under test. When five different Taconic substrates with a relative permittivity ranging from 2.17 to 10.2 were used as the superstrate under test, experiment results show that the sensitivity of the proposed MPSA, which is measured by the shift in the resonant frequency of the input reflection coefficient, is 4.1 to 6.1 times higher than that of the conventional MPSA.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.33-41
• /
• 2022

This paper describes a planar microstrip patch antenna designed on dielectric substrate. Two types of planar microstrip patch antennas are studied for the 5G wireless applications, one type is conventional microstrip structure, the other type is stacked microstrip structure fed by coaxial probe. Using electromagnetically coupling method, stacked microstrip patch antenna employing a multi-layer substrate structure was designed. The results indicate that the proposed stacked microstrip patch antenna performs well at 5G wireless service bandwith a broadband from 3.42GHz to 3.70GHz. The impedance bandwidth(VSWR≤2) is 360MHz(10.28%) from 3.42GHz to 3.78GHz. In this paper, through the designing of a stacked microstrip patch antenna, we have presented the availability for 5G wireless repeater system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1242-1246
• /
• 2007

In this study, FSS(Frequency Selective Surface) with Koch Fractal Curve slot is positioned on the conventional single layer microstrip patch antenna. Numerical results of the proposed antenna bandwidth and the antenna gain are increased compared with those of the conventional single layer microstrip patch antenna. In the future, the fractal geometry of the slot in FSS(Frequency Selective Surface) as a supplementary microstrip patch is researched for the enhancement of the microstrip patch antenna characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.143-152
• /
• 2001

A method for miniaturization of microstrip patch antenna without degrading its radiation characteristics is investigated in this paper. It involves perforating the patch to form a microstrip square-ring antenna, and it's BW enhancement is investigated numerically and experimentally. A ring geometry introduces additional parameters to the antenna, and those are used to control impedances, resonance frequencies, and bandwidths. For a single square ring antenna, an increase of the size of perforation increases its input impedance, decreases the resonance frequency, and bandwidths. But it affects little on directivity of the antenna. To match the antenna to a transmission line and also enhance its bandwidth, the ring is stacked by a square patch or another square ring. Also numerically simulated results by the IE3D, and experimental data are compared for proof.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.856-860
• /
• 2007

In this paper, we propose a microstrip antenna with sufficient impedance bandwidths and gains for the 2.65GHz antenna which used in the satellite digital multimedia broadcasting. The proposed 2.65GHz S-DMB bandwidth microstrip antenna on a substrate, which is small enough to be installed in practical mobile phones, and described simulation feature using by CST Microwave Studio program. The measured result is similar with commercial antenna and acceptable frequency band is found that more wide than the existing products.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.63-64
• /
• 2015

In this paper, a microstrip array antenna capacitively coupled to a microstrip line is studied. The array antenna consists of uniformly spaced rectangular microstrip patches arranged close to a feeding microstrip line on a grounded dielectric substrate. The effects of various parameters, such as strip width and length, distance between adjacent patches, gap between strip patches and microstrip feed line, on the antenna performance were examined. By properly adjusting geometrical parameters, the array suitable for a high gain antenna for use in a frequency band centered at 12.5 GHz was designed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.937-942
• /
• 2018

This paper maximizes the research on broadband characteristics by using air layer instead of using microstrip structure of radiation part with U-shaped slot patched inside and microstrip antenna in order to make the microstrip antenna to have broadband characteristics. Experimental results show that the VSWR is 1.4 or less than the mobile communication frequency band(820~950MHz) and the gain of the antenna is 8.2dBd. This means that the antenna can be miniaturized, and it can be used in the wireless communication fields, and the mobile communication fields for other frequency bands in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.250-254
• /
• 2001

본 문에서는 Tschebyscheff 다항식 이론을 이용하여 상대적 전류 분포비가 1:2:2:1이 되도록 마이크로스트립 패치 어레이 안테나(MPAA) 설계 제작하였다. 지향성을 갖는 제안된 안테나는 작고 가벼우며 얇다. 또한 빔폭이 14。 인 어레이 안테나이고, 중심 주파수는 10.2553GHz이다. MPAA는 한 개의 마이크로스트립 패치 안테나(SMA:single microstrip antenna)특성과 비교 분석하였다. 그 결과 MPAA는 SMA보다 보다 좁은 복사 전력 빔폭과 큰 최대 복사 전력 이득을 획득했다. PIN 다이오드를 이용한 위상 변환기를 적용하면 전자적 빔스케닝이 가능하고, 소형 레이더 시스템에 적합하다.