• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.5 s.57
• /
• pp.169-179
• /
• 2009

The purpose of this paper is to find an efficient heat source to amplify the surface temperature of damaged concrete structures for infrared thermography. we compare two different heat sources of far-infrared lamp and halogen lamp each other for their efficiency. The two heat sources were applied to the concrete specimens. Two different concrete specimens were used: one was the concrete containing internal void and the other was wrapped with partially unbonded fiber reinforced polymer sheet. it was found that the far-infrared lamp was more efficient than the halogen lamp. In addition, we propose a new algorithm to make the damage zone displayed clear in the image obtained from the thermographic operation. The algorithm is a combination of Gauss filtering process and the Prewitt mask operation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.195-200
• /
• 2006

The conventional discrete circuit for ABS/TCS system was examined and the problems of the system were analyzed by computer simulation. In order to improve the performance of ABS/TCS system, interface IC which has error compensation, comparator and under voltage lock-out circuit was designed and their electrical characteristics were investigated. The voltage regulator was included to compensate the temperature variation in the temperature range from $-20^{\circ}C$ to $120^{\circ}C$ for automobile environment. ABS and brake signal were separated using the duty factor of same frequency or different frequencies. UVLO(Under Voltage Lock-Out) circuit and constant current circuit were applied for the elimination of noise, and protection circuit was applied to cut the excess current off. Layout for IC fabrication was designed to enhance the electrical performance of ABS/TCS system. Layout was consisted of 11 masks, arrayed effectively 8 pads to reduce the current loss. We can see that the result of layout simulation was better than the result of bread board.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.943-949
• /
• 2019

As use of digital equipment in various fields is increasing importance of processing video and signals is rising as well. However, in the process of sending and receiving signals, noise occurs due to different reasons and this noise bring about a huge influence on final output of the system. This research suggests algorithm for effectively repairing video in consideration to characteristics of its noise in condition where impulse and AWGN noises are combined. This algorithm tries to preserve video features by considering inference to noise components and resolution of filtering mask. Depending on features of input resolution, standard value is set and similar resolutions is selected for noise removal. This algorithm showing simulation result had outstanding noise removal and is compared and analyzed with existing methods by using different ways such as PSNR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1468-1473
• /
• 2018

The importance of communication and data processing is increasing with the advance of the Fourth Industrial Revolution. Hence, the importance of video and data processing technologies, which directly influence the accuracy and reliability of equipment, is also increasing. In this research report we propose an algorithm for calculating the final output by estimating the standard deviation and estimate required for removing AWGN while adapting to changes in the frequency factors of video. This algorithm calculates the final output by checking an estimated value against the effective pixel range, which is obtained from the standard deviation of mask factors. Subsequently, the weighted value is computed, taking into account the filter output. To evaluate the functionality of this algorithm, it is compared with the most-commonly used present method through simulation. The simulation results show that the important features of the image are preserved and efficient noise cancellation performance is demonstrated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.798-801
• /
• 2014

Nowadays, the demand for multimedia services has grown with the rapid evolution in the digital era. But due to external causes in the process of processing, transmitting and storing image data, the images are damaged. One of the major causes of such damage is known to be noise. Some of the most commonly used methods for removing noise are CWMF(center weighted median filter), A-TMF(alpha-trimmed mean filter) and AWMF(adaptive weighted median filter). However, these filters all leave a bit to be desired in removing noise in a complex noise environment. Therefore this paper suggest an image restoration filter algorithm that first judges the noise and sets a adjustment weight based on the median value and distance of the mask to remove the complex noise. For an objective analysis, the results were compared against existing methods and the PSNR(peak signal to noise ratio) was used as a reference.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.1
• /
• pp.44-49
• /
• 2022

Abstract Recently, with the development of IoT technology and communication media, various video equipment is being used in industrial fields. Image data acquired from cameras and sensors are easily affected by noise during transmission and reception, and noise removal is essential as it greatly affects system reliability. In this paper, we propose a weight filter algorithm based on the pixel value distribution pattern to preserve details in the process of restoring images damaged in AWGN. The proposed algorithm calculates weights according to the pixel value distribution pattern of the image and restores the image by applying a filtering mask. In order to analyze the noise removal performance of the proposed algorithm, it was simulated using enlarged image and PSNR compared to the existing method. The proposed algorithm preserves important characteristics of the image and shows the performance of efficiently removing noise compared to the existing method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.505-508
• /
• 2021

반도체 회로의 미세화로 단위 공정이 증가하면 TAT(turn-around time) 증가에 따른 제조 비용이 늘어난다. 반도체 공정 중 포토 공정은 마스크의 회로를 웨이퍼에 전사하는 공정으로 전사를 담당하는 노광장비의 성능에 의해 회로의 정확성이 결정된다. 이런 정확성을 검증하는 계측공정은 회로의 미세화가 진행될수록 필요성은 증가하나 TAT 증가의 주된 요인으로 최근 기계학습을 사용한 다양한 예측 모형들의 개발로 계측 결과를 예측하는 실험들이 진행되고 있다. 본 논문은 노광장비 센서들의 이상값을 감지하여 분류 후 계측공정을 진행하는 LFDC(Lithography Fault Detection and Classification) 시스템의 문제인 분류 성능이 떨어지는 것을 해결하기 위해 XGBoost를 사용하여 계측공정을 진행하지 않고 노광장비 센서의 이상값을 학습된 학습기를 통해 분류하여 포토 공정을 재진행하거나 다음 공정을 진행하는 방법을 실험하였다. 실험에서 사용된 계측 결과 예측 모형은 89%의 정확도를 확보하였고 반도체 데이터 특성인 심각한 불균형의 데이터에 대해서도 같은 정확도를 얻었다. 이런 결과는 노광장비 센서들의 이상값에 대해 89%는 정상으로 판단하였고 정상으로 판단한 웨이퍼를 실제 계측 시 예측과 같은 결과를 얻었다. 계측 결과 예측 모형을 사용하면 실제 계측을 진행하지 않고 노광장비 센서들의 이상값에 대한 판정을 할 수 있어 TAT 단축으로 제조 비용감소, 계측 장비 부하 감소 및 효율 향상을 할 수 있다. 하지만 본 논문에서는 90%의 성능을 보이는 계측 결과 예측 모형으로 여전히 10%에 대해서는 실제 계측이 필요한 문제에 대해 추후 더 연구가 필요하다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.115-117
• /
• 2021

Currently, as IoT technology develops, monitoring systems are being used in various fields, and image processing is being used in various forms. Image data causes noise due to various causes during the transmission and reception process, and if it is not removed, loss of image information or error propagation occurs. Therefore, denoising images is essential. Typical methods of eliminating Salt and Pepper noise in images include AF, MF, and A-TMF. However, existing methods have the disadvantage of being somewhat inadequate in high-density noise. Therefore, in this paper, we propose an algorithm for determining noise for Salt and Pepper denoising and replacing the central pixel with an original pixel if it is non-noise, and processing the filtering mask by segmenting and averaging it in eight directions. We evaluate the performance by comparing and analyzing the proposed algorithms with existing methods.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.05a
• /
• pp.315-322
• /
• 2002

최근에 경험적 지식을 체계화하는 방법으로 사례기반추론(CBR: Case Based Reasoning) 및 규칙기반추론(RBR: Rule Based Reasoning)이 여러 분야에서 이용되고 있다. CBR과 RBR이 각각 활용되기도 하지만 문제 해결의 정확성을 높이기 위해 복합된 형태로 사용되기도 하고, 흑은 효과적으로 문제를 해결하기 위해 문제 해결 단계별로 각각 사용되기도 한다 또한 데이터에서 지식을 추출하기 위한 세부 알고리즘으로는 인공지능과 통계적 분석기법 등이 활발하게 연구 및 적용되고 있다. 본 연구는 모니터의 핵심 부품인 섀도우마스크(Shadow Mask)를 개발하는데 있어 도면 협의부터 설계가지의 과정에 CBR과 RBR을 활용하고 발생되는 데이터를 이용하여 진화(Evolution)하는 지식기반시스템(Knowledge Based System)으로 구축하는 것을 목적으로 하고 있다. 특히 도면 협의시 인터넷상에 웹서버 시스템을 통하여 규격 (User Spec.)을 생성하고 이를 이용하여 자동으로 도면이 설계되도록 하고 저장된 사례들을 공유할 수 있도록 하여 도면 검토 시간이 단축되고 검토의 정확성을 기할 수 있어 실패비용을 감소시켰다. 그리고 실제 설계시 CBR과 RBR을 활용하여 자동설계를 할 수 있게 하였고 현장에서 발생되는 데이터를 지식화하여 유사사례 설계가 가능하도록 하였다. 지식기반시스템은 신속한 도면 검토가 가능하므로 인원 활용이 극대화되고, 섀도우 마스크 설계자와 마스터 패턴 설계자 사이의 원활한 의사소통을 통해 고객과의 신뢰성 확보와 신인도 향상을 기대할 수 있는 효과가 있다. 그리고 고급설계자에게만 의지되어온 것을 어느 정도 해결할 수 있고, 신입설계자에게는 훌륭한 교육시스템이 될 수 있다.한 도구임을 입증하였다는 점에서 큰 의의를 갖는다고 하겠다.운 선용품 판매 및 관련 정보 제공 등 해운 거래를 위한 종합적인 서비스가 제공되어야 한다. 이를 위해, 본문에서는 e-Marketplace의 효율적인 연계 방안에 대해 해운 관련 업종별로 제시하고 있다. 리스트 제공형, 중개형, 협력형, 보완형, 정보 연계형 등이 있는데, 이는 해운 분야에서 사이버 해운 거래가 가지는 문제점들을 보완하고 업종간 협업체제를 이루어 원활한 거래를 유도할 것이다. 그리하여 우리나라가 동북아 지역뿐만 아니라 세계적인 해운 국가 및 물류 ·정보 중심지로 성장할 수 있는 여건을 구축하는데 기여할 것이다. 나타내었다.약 1주일간의 포르말린 고정이 끝난 소장 및 대장을 부위별, 별 종양개수 및 분포를 자동영상분석기(Kontron Co. Ltd., Germany)로 분석하였다. 체의 변화, 장기무게, 사료소비량 및 마리당 종양의 개수에 대한 통계학적 유의성 검증을 위하여 Duncan's t-test로 통계처리 하였고, 종양 발생빈도에 대하여는 Likelihood ration Chi-square test로 유의성을 검증하였다. C57BL/6J-Apc$^{min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한 대조군의 대장선종의 발생률은 84%(Group 3; 21/25례)로써 I3C 100ppm 및 300ppm을 투여한 경우에 있어서는 각군 모두 60%(Group 1; 12/20 례, Group 2; 15/25 례)로 감소하는 경향을 나타내었다. 대장선종의 마리당 발생개수에 있어서는 C57BL/6J-Apc$^{min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2017

In this Paper, Double Encryption Technology Based on Phase-Shifting Digital Holography and Digital Watermarking is Proposed. For the Purpose, we First Set a Logo Image to be used for Digital Watermark and Design a Binary Phase Computer Generated Hologram for this Logo Image using an Iterative Algorithm. And Random Generated Binary Phase Mask to be set as a Watermark and Key Image is Obtained through XOR Operation between Binary Phase CGH and Random Binary Phase Mask. Object Image is Phase Modulated to be a Constant Amplitude and Multiplied with Binary Phase Mask to Generate Object Wave. This Object Wave can be said to be a First Encrypted Image Having a Pattern Similar to the Noise Including the Watermark Information. Finally, we Interfere the First Encrypted Image with Reference Wave using 2-step PSDH and get a Good Visible Interference Pattern to be Called Second Encrypted Image. The Decryption Process is Proceeded with Fresnel Transform and Inverse Process of First Encryption Process After Appropriate Arithmetic Operation with Two Encrypted Images. The Proposed Encryption and Decryption Process is Confirmed through the Computer Simulations.