• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.3
• /
• pp.162-170
• /
• 2022

In the case of patients with pathological tooth wear, it is necessary to evaluate the loss of the vertical dimension. Setting the appropriate vertical dimension is important to rehabilitate the patient's stable intermaxillary relationship. A 77-year-old female patient's chief complaint was the pain of the mandibular incisors and the lack of molars. At the first visit, pathologic tooth wear of the mandibular incisors were observed. After diagnosis and evaluation, loss of vertical dimension was not observed, but insufficient intermaxillary space for prosthetic restoration was confirmed. Mandibular rehabilitation was performed with vertical dimension increase and this showed satisfactory results both functionally and aesthetically.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.1-8
• /
• 1986

자동차 동력전달계통의 중요부분을 이루고 있는 치차장치는 고장의 영향도가 대단히 높은 장치일 뿐만 아니라 점검과 열화, 손상검지가 곤란한 장치이다. 지금까지, 치차진단기술의 연구는, 구미 에서는 성행하고 있음에도 불구하고, 국내에서는 그다지 되고있지 않다. 이와 같은 상황을 근거로 하여, 본 연구실에서는 치차진단기술의 연구개발에 착수하여, 그 첫 번째 단계로서, 현상의 기술 및 연구내용을 조사하였다. 그들중에서 중요하다고 생각되는 것을 여기에 소개한다. 치차장치의 내부에 이상이 생기면, 진동과 이음이 생기기도 하고 속도변동 등을 일으킨다. 또, 윤활유 중의 금속분이 증가하거나, 온도가 상승하기도 한다. 이와같은 이상의 정보를 포함하는 것을 징후 parameter라고 말한다. 이들 몇 개인가의 parameter중, 치차결함의 검출은, 진동과 음이 가장 좋은 parameter라고 생각되고 있다. 따라서 진단기술의 연구는, 거의 대개가 치차로부터 나오는 진동과 음의 발생기구와 신호처리에 관한 것이다. 전자로는 (1) 치차의 마모모델과 발생진동수 (2) 각종 결함고 발생진동수 후자로는 (3) 시간평균화처리 (4) Cepstrum (5) fluctuation 분석 등이 있다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.215-226
• /
• 2023

Severe wear of the anterior teeth facilitates the loss of anterior guidance, which protects the posterior teeth from wear during excursive movement. Additionally, when treating patients with collapsed occlusion due to multiple tooth loss and tooth wear, it is important to determine the presence of vertical dimension loss through accurate clinical and radiographic examinations and diagnostic wax-up. The patient of this case is a 44-year-old female patient who complained of overall tooth wear and loss of posterior teeth due to bruxism and clenching habits, visited the hospital with the address of restoring masticatory function and improving aesthetic appearance through prosthetic treatment. Through model analysis and diagnostic wax-up, an increase in vertical dimension was determined, and full mouth restoration with fixed prostheses was planned. The degree of adaptation to the vertical dimension was confirmed step by step using an occlusal splint designed with CAD (Computer aided design) software and 3-D (3-Dimensional) printed, and then restored with provisional restoration and after a 4-month adaptation period, the entire dentition was restored with metal ceramic crowns and implants. Through this procedure, satisfactory treatment results were obtained in terms of function and aesthetics.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.1
• /
• pp.222-228
• /
• 2003

A reliable tool wear monitoring technique is the one of important aspects for achieving an integrated and self-adjusting manufacturing system. In this paper, a tool wear estimation approach for turning is proposed. This approach uses the model of cutting force, spindle displacement and their relation. A series of experiments were conducted by designing experimental techniques to determine the relationship between flank wear and cutting force coefficient as well as cutting parameters such as cutting speed, depth of cut and feed. The proposed model performance has shown that the spindle displacement model predicts tool wear with high accuracy and spindle displacement signal is possible to replace cutting force signal.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.459-464
• /
• 2001

A reliable tool wear monitoring technique is the one of important aspects for achieving an integrated and self-adjusting manufacturing system. In this paper, a tool wear estimation approach for turning is proposed. This approach uses the model of cutting force, spindle displacement and their relation. A series of experiments were conducted by designing experimental techniques to determine the relationship between flank wear and cutting force coefficient as well as cutting parameters such as cutting speed, depth of cut and feed. The proposed model performance has shown that the spindle displacement model predicts tool wear with high accuracy and spindle displacement signal is possible to replace cutting force signal.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.120-129
• /
• 1995

This study introduces a tool wear monitoring technology in face milling operation comprised of an unsupervised neural network. The monitoring system employs two types of sensor signal such as cutting force and acceleration in sensory detection state. The RMS value and band frequency energy of the sensor signals are calculated for te input patterns of neural network. ART2 neural network, which is capable of self organizing without supervised learning, is used for clustering of tool wear states. The experimental results show that tool wear can be effectively detected under various cutting conditions without prior knowledge of cutting processes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.234-244
• /
• 2023

Tooth wear refers to the loss of dental hard tissue caused by various physiological and pathological causes, and excessive pathological wear can cause complications such as pathological changes in dimensions, occlusal disharmony, loss of function, and aesthetic problems. The cause of tooth wear can be caused by attrition, abrasion, corrosion and abfraction, and it is known to act in a multifactorial etiology in interocclusal activity. In patients with excessive pathological wear, it is important to determine whether or not the vertical dimension of occlusion is reduced, and complete oral rehabilitation should be achieved with the adaptation of the neuromuscular and temporomandibular joint through accurate diagnosis and analysis. The patient in this case was a 63-year-old male patient, who presented discomfort to cold beverage due to severe tooth wear. After analysis of the patient's vertical dimension of occlusion, a full mouth rehabilitation was performed with increasing vertical dimension of occlusion. The goal of treatment was to improve the occlusal plane with the equal-intensity contact of all teeth, harmonious anterior guidance and immediate disclusion of all posterior contacts. After rehabilitation, the patient was satisfied with function and esthetic appearance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.302-307
• /
• 2018

Multiple tooth loss and excessive occlusal wear can result in damage to occlusal disharmony, functional disorders and esthetic problems, requiring comprehensive prosthetic treatments. Changing vertical dimension harmonized with surrounding muscle tissue is important. In this case, the patient with loss of vertical dimension caused by severe tooth loss and tooth wear was treated with the analysis of vertical dimension, such as diagnostic model, radiography and various clinical exams. the patient was satisfied with favorable functions and esthetics for 1 years of follow-up.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.224-231
• /
• 2016

Severe dental attrition causes pathological changes of the tooth, imbalanced occlusion, and functional and aesthetic complications and can also result in a decrease in occlusal vertical dimension that can incur temporomandibular joint and muscular complications. Before restoring the vertical dimension with full-mouth prosthetic restorations, it is important to determine the amount of vertical lifting through complete diagnosis. In this study, a 59 year-old male patient with generalized attrition and fracture of teeth was treated with full-mouth zirconia prosthetic restoration in order to recover vertical dimension and aesthetics. Through the analysis of physiologic rest position and inter-canine distance, the treatment was planned for lifting 3 mm in vertical dimension. Interim crown were fabricated after full-mouth wax up, having the patient use for 6 months. The final monolithic and bilayered zirconia restorations were completed. The patient showed satisfaction in function and aesthetics for 18 months of follow-up since delivering the final restorations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.210-219
• /
• 2021

Excessive teeth wear can lead to reduced chewing efficiency, occlusal plane collapse, and facial changes. Full mouth rehabilitation with a change in vertical dimension may cause pain in the temporomandibular joint, masticatory muscle and teeth, so an accurate diagnosis and treatment plan is required. In this case, a 69-year-old man had excessive teeth wear with a loss of posterior support. We evaluated the degree of adaptation to the increased vertical dimension with the removable occlusal splint and provisional restoration. We report this case because the treatment result has been functionally and aesthetically satisfactory by providing stable anterior guidance, proper posterior teeth disclusion, and even contact of all teeth in centric occlusion.