• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.685-695
• /
• 2004

The aim of this study was to evaluate the resistance to degradation and to compare the wear resistance characteristics of four composite resins in an alkaline solution. The resistance to degradation was evaluated on the basis of mass loss(%), degradation depth(${\mu}m$), Si loss(ppm) and wear depth. The brands studied were Heliomolar flow, Filtek supreme, Point4, Tetric flow. The results were as follows: 1. The sequence of the mass loss was in descending order by Heliomolar flow, Filtek supreme, Point4, Tetric flow. There was significant differences among the materials except Heliomolar flow and Filtek supreme. 2. The sequence of the degree of degradation layer depth was in descending order by Filtek supreme, Heliomolar flow, Tetric flow, Point4. There were significant differences among the materials except Heliomolar flow and Tetric flow. 3. The sequence of Si loss was in descending order by Filtek supreme, Heliomolar flow, Point4, Tetric flow. There were significant differences among the materials except Point 4 and Tetric flow. 4. The sequence of maximum wear depth was in descending order by Heliomolar flow, Point4, Fillet supreme, Tetric flow and there was increasing wear depth on soaking in 0.1N NaOH solution. 5. When observed with SEM, destruction of bonding between matrix and filler was observed and when observed with CLSM, the depth of degradation layer of specimen surface was observed. There results indicate that wear and hydrolytic degradation could be considered to be evaluation factors of composite resins.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.273-284
• /
• 2007

The aim of this study was to evaluate the resistance to degradation and to compare the wear resistance characteristics of four esthetic restorative materials in an alkaline solution(0.1N NaOH). The composite resins studied were Composan LCM flow(Promedica, Germany). Clearfil ST(Kuraray medical, Japan), Durafi VS1(Heraeus Kulzer, U.S.A), Point 4(Kerr, U.S.A). The results were as follows : 1. The mass loss of each brand was $1.02{\sim}6.04%$ and highest value in Durafil VS$(6.04{\pm}0.29%)$. 2. The sequence of the degree of degradation layer depth was in descending order by Durafil VS, Clearfil ST, Point 4 and Composan LCM flow. There were significant differences between Point 4, Composan LCM flow and the others (p<0.001). 3. The sequence of the Si loss was in descending order by Clearfil ST, Durafil VS, Composan LCM flow and Point 4. There were significant differences among the materials (p<0.001). 4. On SEM, destruction of bonding between matrix and filler and on CLSM, the depth of degradation layer of specimen surface was observed. 5. The sequence of maximum wear depth was in descending order by Durafil VS, Composan LCM flow, Point 4 and Clearfil ST. There were no significant differences among the materials (p>0.001) 6. The correlation coefficient between Si loss and degradation layer depth (r=0.892, p<0.01) and Si loss and mass loss(r=0.736, p<0.01) were relatively high. These results indicate that hydrolytic degradation, wear and another factor may consider as evaluation factors of composite resins.

• Korean Journal of Environmental Biology
• /
• v.25 no.1
• /
• pp.66-71
• /
• 2007

The fourth instar larvae of C. riparius were treated with potential endocrine disruption chemicals (EDCs) such as bisphenol A (BPA) and 4-nonylphenol and the effects of morphological abnormalities were observed. The deformities of the mentum following exposure to EDCs showed the smooth tooth, the loss of tooth and deformed tooth. The incidence rates of the mentum deformity were associated with chemicals: BPA $31{\sim}90%$, and 4-nonlyphenol was $40{\sim}80%$. As the concentration of BPA increased, the incidence of deformed mentum was dose dependent. While the incidences of deformed mentum following exposure to 4-nonlyphenol was not associated with their concentrations. The deformed MLT observed smooth or round tooth and the deformity of LT showed loss of one or more than tooth. Also, the MIX type was usually smooth or loss tooth. The abundance of deformity type for the mentum showed MIX (MLT+LT) > LT (lateral teeth) > MLT (median lateral teeth).

• Elastomers and Composites
• /
• v.33 no.4
• /
• pp.231-237
• /
• 1998

In order to investigate the physical properties of rubber blend compound, this experiment was carried out on the cure rate, loss tangent, reinforcement and abrasion properties of S-SBR (solution styrene-butadiene rubber) blends containing silane coupled silica and E-SBR (emulsion styrene-butadiene rubber) blends containing carbon black as a model compound. E-SBR blend showed the highest total bound rubber(TBR), while S-SBR blends showed constant TBR level regardless of rubber type. Rapid cure rate was achieved when the styrene and vinyl content of rubber microstructure decreased and TBR content of rubber compounds increased. The modulus as the index of rubber reinforcement showed the linear relation with TBR content. The large amount of PICO loss was observed when the styrene and vinyl content of rubber microstructure increased, while the small amount of PICO loss was observed when the ratio of bu-tadiene increased in the S-SBR blends with silane copuled silica. The high loss tangent at $0^{\circ}C$, the low loss tangent at $60^{\circ}C$, and the large difference of loss tangent were shown in the S-SBR blends with high styrene content compared to E-SBR blend.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.75-82
• /
• 2011

There is the uncertain period of the construction in case of the products meeting the quality standard of KS M 6080, the quality is degraded because of the abrasive loss of the paint caused by vehicle tires as the traffic amount increases and of the loss and detachment of the glass beads providing the retroreflective function. The abrupt degradation of visibility causes the high frequency of traffic accidents at night and increases the traffic accident rate. Additional supplementary construction induces the direct material and construction costs. As the more cost induction effect than the direct cost, the traffic jam caused by the additional construction increases the indirect social costs such as time cost and vehicle cost. Hence, the study is concerned with performing the abrasion resistance test based on the EN 1436 standard to check and improve the quality of various road marking materials resulting in improving the durability of road marking materials. However, even though the difference in the durability lifetime of resins(binders) is bibliographically or theoretically clear, there was no difference in the durability lifetime (retroreflectivity aspect) of the road marking paint using these binders. The reason is that the bonding of beads was very insufficient or that the cross density caused by crack or freshness was low. Moreover, the measured wet retroreflectivity was distributed as the Rw3 or higher class in average on the basis of EN 1436 but was very insufficient on the basis of the minimum wet threshold retroreflectivity with 100mcd/($m^2{\cdot}lx$) managed overseas.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.760-761
• /
• 2015

기어는 회전 기계 사이의 동력 전달을 위한 장치이며 현재 산업 전반의 통상적인 기어는 기계적 기어가 주류로서 형성되어 있다. 하지만 기계적 기어는 맞물린 톱니바퀴의 물리적 접촉에 의해 접촉 경계면의 마모 및 파손, 소음과 진동의 문제가 있으며 유지보수 비용 또한 크다. 따라서 최근 물리적 접촉이 없어 기계적 기어의 많은 문제를 해결할 수 있는 마그네틱 기어 (Magnetic Gear)에 대한 관심이 높아지고 있다. 마그네틱 기어는 영구자석에서 생성된 자계를 이용하여 비접촉 동력전달이 가능하며, 마찰손실 제거, 유지보수의 용이성, 매우 적은 소음 및 진동 등의 장점을 가지고 있다. 본 논문에서는 이러한 마그네틱 기어의 토크전달 방법과 형상변화에 따른 전달토크 특성을 2-D 유한요소해석법을 이용하여 해석하고 분석하고자 한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.129-144
• /
• 1999

플랜트와 같은 장치산업은 내구성 구조물이므로 사용중에 열화가 발생하는 것은 필연적이다. 특히 고온, 고압의 부식환경하에서 사용되는 설비는 손상이 심하므로 가동중에 돌발적인 고장이 발생하여 플랜트의 가동을 중지하거나 파손사고가 일어나 생산손실은 물론 경우에 따라서는 안전사고의 발생, 환경오염 등 사회적인 문제를 일으키므로 이들 설비의 경년열화 실체를 충분히 이해하고 대책을 수립하는 것은 대단히 중요하다. 따라서 본고에서는 장치산업에서 발생하는 열화현상(재료의 연화, 경화 및 취화, 크리프, 피로, 부식, 마모 등)중 손상의 주류를 이루는 연화, 경화 및 취화, 크리프 피로에 대하여 기본적인 손상기구(damage mechanism)와 비파괴적 진단 및 평가 방법에 주안점을 두어, 현재 국내의 각종 플랜트 진단에 실용화된 기술을 해설하여 이 분야에 종사하는 관계자 여러분의 이해에 조금이라도 기여코자 한다.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.3
• /
• pp.19-24
• /
• 2015

Brake pads are a component of disc brake system of automobile and consist of steel backing plates and friction material facing the disk brake rotor. Due to the repeated sliding forces and torque in vehicle braking, friction performance of brake pads are ensured. Futhermore, the brake pad is one of major tuning components in aftermarket, mechanical characteristics of the brake pad are necessary to evaluate for establishing the certification standards of tuning components. This study had performed the five specimen tests for friction coefficients and wear loss rates according to the SAE test specification. Using the instrumented indentation method, yield strength and tensile strength were measured. Friction coefficients, 0.386 - 0.489, and wear loss rates, 1.0% - 3.7% are obtained. The range of yield strength and tensile strength are 21.4 MPa - 105.3 MPa and 39.5 MPa - 176.4 MPa respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.285-291
• /
• 2014

This paper is related to the improvement of efficiency for high performance centrifugal pumps by reducing leakage loss, which is achieved by applying the grooved seal as a non-contact seal to the pumps. Various combinations of grooved seal types, including the spiral and the parallel groove in the rotor and/or in the stator, were tested by the experiment. And the corresponding hydraulic performance and the magnitude of axial thrust were measured and calculated for ten cases. From the results, the type with the spiral groove(spiral angle : $0.98^{\circ}$) in both the rotor and the stator was found to be most effective. In this case, the head and the efficiency were improved from the original design by 2.1% and 2.3% respectively at design capacity($340m^3/h$), and the axial thrust was decreased by 10%.

• Clean Technology
• /
• v.24 no.1
• /
• pp.63-69
• /
• 2018

The reduction reaction characteristics and physicochemical properties were studied for the selection of oxygen carrier, which is the core of the chemical looping combustion (CLC) technology. Fuel conversion and $CO_2$ selectivity of oxygen carrier according to the concentration of reducing gas and the reduction temperature using three kinds of oxygen carrier (SDN70, N018-R2, N016-R4) were measured and compared. In addition, Attrition Index (AI) and BET surface area were measured to analyze the attrition resistance and the surface characteristics of the oxygen carrier. As a result, it was confirmed that all three kinds of oxygen carrier were suitable for use in chemical roofing combustion system, and the best particle was determined to be N016-R4.