• Title/Summary/Keyword: 마모시험

Search Result 351, Processing Time 0.038 seconds

Sample of Presentation Title of Surface Engineering (Micro Blade용 Bond 재료에 있어 윤활첨가에 따른 마모시험특성)

  • Kim, Song-Hui;Mun, Jong-Cheol
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2008.11a
    • /
    • pp.111-113
    • /
    • 2008
  • 반도체 산업에 있어 package 절단에 사용되는 diamond micro blade의 성능은 그 반도체의 자체적 성능에서뿐만 아니라 생산 비용 등에 있어서도 매우 중요한 비중을 차지하고 있다. 이러한 블레이드의 성능향상을 위해 윤활첨가제(흑연, $MoS_2$)의 첨가효과에 대해 마모성능시험을 통해 알아보고 비교 분석을 행하였다. 그 결과 윤활첨가제의 첨가를 통해 절삭 중 블레이드 표면에서 발생할 수 있는 응착 마멸현상이 줄어들었음을 확인할 수 있었고, 윤활첨가제의 적절한 첨가량에 대해 재조명 해 볼 수 있었다.

  • PDF

Wear Properties of Seal Graphite at Elevated Temperature (기밀소재 Graphite의 고온마모 특성에 관한 연구)

  • Yang, Ho-Young;Kim, Jaehoon;Ha, Jaeseok;Kim, YeonWook;Park, Sunghan;Lee, Hwankyu
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.17 no.3
    • /
    • pp.15-20
    • /
    • 2013
  • The graphites as airtight structure seals prevent high-pressure and high-temperature gas from flowing into actuator of propulsion system and generate lubricant film during wear procedure to assist lubricant and sealing. In this study, the tribological characteristics of the graphite in high-temperature are evaluated. In order to evaluate the tribological characteristics of high density graphite(HK-6), variables which are temperature, sliding speed and contact load are set. this study suggest optimized environment conditions through the wear properties of graphite. Consequeantly, high temperature is better than at room temperature to generate lubricant film, so that friction coefficient of graphite is lower at high temperature than at room temperature.

경수로 핵연료집합체의 모드해석 및 유동시험 평가

  • 전상윤;김용환;전경락;김재원
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1997.05b
    • /
    • pp.46-51
    • /
    • 1997
  • 최근 경수로 핵연료 손상 원인 중의 하나인 연료봉 마모(Fretting Wear)가 지지격자의 스프링력 저하뿐만 아니라 원자로 냉각재 유동에 기인한 집합체 진동(Self-excited Fuel Assembly Vibration)에 의해 유발될 수 있는 것으로 밝혀져 해외 연료공급자들은 새로운 연료개발시 집합체 유동시험을 수행하여 냉각재 유동에 의한 집합체 진동 여부를 확인하고 있다. 본 연구에서는 경수로 핵연료집합체에 대한 모드해석 및 진동시험으로부터 고유진동수 및 진동모드형태를 구하여 모의 집합체 유동시험 결과와 비교 평가하였고 냉각재 유동에 의해 과도한 집합체 진동이 발생됨을 확인하였으며 가연성흡수봉집합체를 삽입한 경우에 대한 유동시험 결과와도 비교하였다. 또한, 이들 집합체의 진동 변위량과 손상 연료의 마모량 분포의 상관성을 비교 평가하였다.

  • PDF

A Study on Solidification and Wear Character of Multi-alloyed White Cast Iron

  • Yu, Sung-Kon;Matsubara, Yasuhiro
    • Journal of Korea Foundry Society
    • /
    • v.20 no.4
    • /
    • pp.260-268
    • /
    • 2000
  • 응고 및 마모거동을 연구하기 위하여 Cr, V, Mo 및 W의 조성이 다른 3종류의 백주철을 주조하였다. 고주파유도용해로에서 장입시켜 1873K까지 승온시켜 장입원료들을 모두 용해시킨 후 1823K에서 Y블럭주형에 주입하였다. 얻어진 3종류의 백주철조성은 다음과 같다: Fe-3%C-10%Cr-5%Mo-5%W(합금1), Fe-3%C-10%V-5%Mo-5%W(합금2) 및 Fe-3%C-17%Cr-3%V(합금 3)응고과정을 추적하기 위하여 각 시편으로부터 50g을 채취한 후 알루미나도가니에 넣고 실리콘카바이드로를 사용하여 1723K의 알콘분위기하에서 재용해를 시켰다. 용금을 10K/분의 속도로 냉각시키면서 열분석을 행하였으며 도중 몇 차례 소입 실험을 병행하였다.합금1의 경우 초정오스테나이트, (오스테나이트+$M_7C_3$)공정, (오스테나이트+$M_6C$)공정, 합금2의 경우 초정 MC, 초정오스테나이트, (오스테나이트+MC)공정 , (오스테나이트+$M_2C$)공정, 합금3의 경우 초정 $M7C_3$와 (오스테나이트+$M_7C_3$)공정으로 구성되어 있었다. 주방상태, 균질화열처러상태, 공냉상태, 템퍼링상태에서 내마모시험을 행하였다. 먼저 주방상태시 편을 진공분위기하에서 1223K에서 5시간동안 균질화열처리를 행한후 로냉을 시켰다. 다시 이 시편을 1323K에서 2시간 유지후 강제공냉을 시켰으며 강제공냉된 시편을 573K에서 3시간동안 템퍼링처리를 하였다. 내마모시험은 120 mesh마모지에 10N의 하중을 가하여 실시하였다. 각 사이클마다 무게감소를 측정하였으며 8번 반복실험을 하였다. 마모량은 균질화열처리시편, 주방상태시편, 템퍼링시편, 공냉시편의 순으로 감소하였다. 합금2가 마모량이 가장 적었으며 합금3이 가장 많았다. 합금2의 마모량이 가장 적은 이유는 조직이 초정 MC, 공정 MC 및 공정 M2C로 구성되어 있기 때문으로 사료된다.주방상태에서 기지조직은 퍼얼라이트이었으나 열처리를 통하여 마르텐사이트, 템퍼드마르텐사이트, 잔류오스테나이트로 변태하였다. 이상의 결과를 종합해 보면 MC가 내마모성에 가장 기여하는 조직으로 판단되어진다.

  • PDF

Analysis of Rail Wear Rate according to Wheel/Rail Contact Pressure on Curved Track (곡선부 차륜/레일 접촉압력에 따른 레일마모진전 경향 분석)

  • Sung, Deok-Yong
    • Journal of the Korean Society for Railway
    • /
    • v.20 no.4
    • /
    • pp.512-520
    • /
    • 2017
  • On a typical railway, trains travel using the friction between the wheel and the rail. Contact pressure is generated between the wheel and the rail, and the magnitude of the contact pressure changes depending on the weight, speed, wheel-set hunting, and contact point of the vehicle. In this study, the contact characteristics were analyzed through the finite element analysis for the wheel/rail system on curved track, and fatigue damage and wear rate of wheel/rail according to contact pressure were analyzed through rolling contact fatigue test. Results indicate that, general and heat treated rails showed higher wear rate than wheels, and general and heat treated rail wear rate increased rapidly over a certain number of repetitions. In addition, the general rail wear rate was about 7 ~ 15% higher than that of the heat treated rail, and a regression equation for the rail wear rate with the contact pressure in the contact pressure range of 900 ~ 1,500 MPa was presented.

Evaluation of Color Coating Method for Color Maintenance of Color Asphalt Pavement (칼라 아스팔트 포장의 색채 표면보수를 위한 칼라코팅 공법 성능평가)

  • Park, Tae-Soon
    • International Journal of Highway Engineering
    • /
    • v.13 no.4
    • /
    • pp.93-101
    • /
    • 2011
  • The evaluation of various color coating methods for color maintenance of color asphalt pavement is conducted using the laboratory and field tests on the bus lane. The surface of color asphalt constructed on the bus lane is deteriorated such as changing color and decoloration and abrasion due to the passing of the traffic and time. The total of 9 coating methods were evaluated in this study. The laboratory tests included Ultra violet test, adhesion test and Taber abrasion test and the field tests were british pendulum test and visual survey. The results of tests showed that the different methods showed the their own engineering characteristics and it is dependant upon the main material used. The rubber epoxy material for the main material showed the satisfactory result among the methods tested. However, the performance of the coating methods after 100days are not satisfactory, decoloration, abrasion and peeling up are investigated and need to be studied for the further application in the field.

A Study on the Effects of Additives on the Friction and Wear Properties of PTFE Composite (첨가제에 의한 PTFE 복합재료의 마찰마모 특성에 관한 연구)

  • 김용직;김윤해
    • Composites Research
    • /
    • v.13 no.4
    • /
    • pp.11-18
    • /
    • 2000
  • This study is mainly concerned with friction and wear properties for the piston ring of non-lubricating air compressor which made of PTFE-polyimide composites. At the PTFE and polyimide alone mixture specimens, PTFE80%-polyimide20%, which shows the lowest mean friction coefficient and specific wear rate at 0.94m/s sliding speed. In case of the specific wear rate, copper30% specimen shows the lowest value of 2.537-5(mm3/Nm) in all specimens. It considered that the friction coefficient is affected by generating speed and quantity of wear film. In case specific wear rate, it is attributed to the fact that the surface hardness of wear film is proportioned to specific wear rate.

  • PDF

Microstructure and tribological properties of CrZr-Si-N films synthesized by unbalanced magnetron sputtering with Cr-Zr-Si segment target (Unbalanced magnetron sputtering과 Segment target을 활용한 CrZr-Si-N 박막의 미세구조와 마모특성)

  • Kim, Dong-Jun;Ra, Jeong-Hyeon;Kim, Seong-Min;Lee, Sang-Yul;Lee, Sang-Yong
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2012.11a
    • /
    • pp.113-114
    • /
    • 2012
  • 본 연구는 segment target을 사용하여 unbalanced magnetron sputtering을 활용하여 고 CrZr-Si-N 박막을 합성하고 박막의 미세구조 및 마모 특성을 연구하는데 그 목적이 있다. 박막의 Si 함량을 조절하기 위하여 각 segment target은 Cr,Zr을 일정vol% 유지하며 Si vol%만 변화하여 설계하였다. Si 함량별로 제작된 마모실험 시편의 미세구조는 XRD, FE-SEM, AFM, TEM을 통하여 분석하였으며, ball on disk type의 마모 시험기를 통해 그 마모 특성을 분석하였으며,

  • PDF

Development of polyurethrane roller for huller (현미기용 합성우레탄롤러 개발)

  • 박회만;정성근;최희석;홍성기;박경규
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2002.07a
    • /
    • pp.215-220
    • /
    • 2002
  • 마모가 잘 되는 현미기 고무롤러의 단점을 보완하여 작업의 효율화를 위해 내마모성이 높은 재질인 합성우레탄으로 현미기용 롤러를 개발하여 시험하였다. 가. 경도별 합성우레탄의 마모량을 테이버식으로 측정한 결과 경도80$^{\circ}$, 85$^{\circ}$에서 각각 68, 72mg으로 낮게 나타났으나 현미기롤러 재질로 적용하기 위해서는 탈부 요인시험이 요구되었다. 나. 합성우레탄롤러의 적정경도 구명요인시험을 실시한 결과 탈부율 및 동할률이 경도 80$^{\circ}$이상에서 기존의 고무롤러에 비해 동등하거나 우수한 것으로 나타났다. 다. 현장 적용 성능시험결과 고무롤러의 경우 벼 가공량이 300톤/조 이었고, 합성우레탄롤러 경도 85$^{\circ}$의 경우 1,083톤/조로 내구성이 3.6배 큰 것으로 나타났다. 라, 고무롤러의 동할율 증가량은 0.43%인데 비해 합성우레탄롤러는 경도 85$^{\circ}$에서 0.29%로 나타나 현미품위가 향상되었다. 마, 위 결과를 종합하여볼 때 합성우레탄 현미기롤러의 경도는 85$^{\circ}$ 가장 적합한 것으로 나타났다.

  • PDF

Abrasive Wear of Hybrid Metal Matrix Composites for High Wear Resistance (고 내마모성 혼합 금속복합재료의 연삭마모)

  • 송정일
    • Composites Research
    • /
    • v.12 no.5
    • /
    • pp.12-22
    • /
    • 1999
  • Aluminum based metal matrix composites(MMCs) are well known for their high specific strength, stiffness and hardness. They are gaining further importance because of their high wear resistance. In this study wear behavior of $Al/Al_2O_3/C$ hybrid MMCs fabricated by squeeze infiltration method was characterized by the abrasive wear test under various sliding speeds at room and high temperature. Wear resistance of MMCs was improved due to the presence of reinforcements at high sliding speed. Especially wear resistance of carbon hybrid MMCs was superior to other materials because of its solid lubrication of carbon. The friction coefficient of MMCs was not affected by the sliding speed.

  • PDF