• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.983-989
• /
• 2011

본 연구에서는 경제요소법을 이용한 프레팅 마멸 예측을 위한 수치적 알고리즘을 개발하였다. 반무한체 해석을 통해 사각조각면위의 균일분포하중과 탄성변형량의 관계로부터 접촉 계면의 응력을 계산하였고 Archard wear 모델을 이용해 각 격자의 마멸 깊이를 계산하여 접촉면의 형상을 예측할 수 있는 알고리즘을 제시하였다. 본 연구의 정확성을 검증하기 위해 McColl 등의 연구와 비교하였고 개발된 알고리즘을 구접촉 모델에 확장하여 그 유용성을 확인하였다. 아울러 프레팅 해석의 효율적인 계산을 위해 한 step당 사이클 증가량인 step cycle이 해의 정확성에 미치는 영향을 검토하여 step cycle 설정의 중요성을 제시하였다.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.241-248
• /
• 2002

• Tribology and Lubricants
• /
• 제29권6호
• /
• pp.366-371
• /
• 2013

Various heat treatment and surface coating methods have been applied to machine parts. Nowadays, diamond-like carbon (DLC) coatings are widely used because of their excellent tribological characteristics. Despite the numerous studies on DLC-coated engineering surfaces, the exact wear mechanisms related to the coating thickness and elastic modulus have not been fully examined. In this study, a sliding contact problem between a small spherical hard particle and a DLC-coated steel surface is analyzed using a nonlinear finite element code, MARC. The maximum principal stress distributions and deformed surfaces are compared for different coating thicknesses and Young's modulus values. Plastically deformed surface shapes such as a groove and torus indicate that the most dominant wear mechanism for a DLC-coated surface is abrasive wear. Fatigue wear can also play a role in a case where the coating thickness is relatively large and the elastic modulus is high.

• 한국산학기술학회논문지
• /
• 제4권1호
• /
• pp.36-41
• /
• 2003

열간단조 밀폐금형의 수명연장을 위한 빌릿의 소성변형 유동해석을 유한 요소법에 의하여 실시한 결과 임프레션 형상에 대한 수정설계를 수행하였고, 임프레션 표면 마멸부위의 보수방법을 육성용접에 의한 방법으로 금형을 재생하여 사용한 결과 개발 전의 3,0(H개 생산에서 개발 후 5,000개 양산되었을 때 임프레션 표면을 관찰하였더니 3,000개 정도에서 나타났던 마멸보다 얕은 마멸이 나타났다.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.161-166
• /
• 2010

본 논문에서는 시일 설치면에서의 마멸발생기구를 정확하게 조사하기 위한 연구의 일환으로 미세입자가 시일과 스틸면 사이에 존재하는 경우의 접촉문제를 비선형문제해석 프로그램인 MARC를 사용하여 해석하였다. 이 결과, 시일의 재질은 스틸면에서의 응력분포와 변형형상에 아주 큰 영향을 미쳤다. 특히, PTFE와 같이 탄성계수가 높은 시일인 경우에 스틸 표면은 국부적으로 항복상태에 도달할 뿐만 아니라 시일을 제거한 후에도 영구변형과 함께 상당한 크기의 압축/인장 잔류응력이 존재하였다. 따라서, 시일과 스틸면 사이에 경질입자가 존재할 경우에는 연삭마멸과 함께 피로마멸이 발생할 수 있음을 확인하였으며, 다양한 설계변수에 대한 추가연구가 요구된다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.101-108
• /
• 1999

This paper was undertaken to do morphological analysis of wear particles for sliding members hydrauric rotary acuator. The lubricating wear test was performed under different experimental conditions using the wear test device and wear specimens of the pin on disk type was rubbed in paraffinic base oil by three kinds of lubricating materials, varying applied load, sliding distance. The four shape parameters (50% volumetric diameter, aspect, roundness and reflectivity) are used for morphological analysis of wear particles. The results showed that the four shape parameters of wear particles depend on a kind of the lubricating materials. It was capable of presuming wear volume for three kinds of materials on driving time.

• Tribology and Lubricants
• /
• 제28권1호
• /
• pp.1-6
• /
• 2012

In this paper, a three elastic body sliding contact problem is modeled to investigate more precise wear mechanisms related with the sealing surface. A 3-D finite element contact model, a small spherical elastic particle, PTFE seal and steel surface, is solved using a nonlinear finite element code MARC. The deformed seal and steel surface shapes, von-Mises and principal stress distributions are obtained for different seal sliding distances. The entrapped small particle within PTFE seal results in very high stresses on the steel surface which exceeded its yield strength and produce plastic deformation such as groove and torus. The sealing surface could also be worn down by sub-surface fatigue due to intervening small particles together with the well-known abrasive wear. Therefore the proposed contact model adopted in this paper can be applied in design of various sealing systems, and further studies are required.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.149-157
• /
• 2000

Tool wear in the shearing process such as blanking, piercing and trimming is very important, because it has great effects on the dimensional accuracy, working efficiency and economy. Most of tools in the shearing process have the coated layer at surface fur good wear and corrosion resistance. When the surface of tool is teated, the wear Phenomena of coated surface layer and inner layer may be different. This paper describes a computer modelling technique by the finite element method in order to investigate the wear mechanism and to predict the wear profile of Ti-N coated tool in piercing process according to the volume of Production. Wear coefficients of the coated layer and inner layer are obtained through Pin-on-Disk wear test, respectively. To verify the effectiveness of the suggested technique, the technique is applied to wear analysis in piercing recess of piston pin and simulation results are compared with experimental ones.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.817-821
• /
• 1997

Ever since the nonlinearity of machine tool dynamics was established, researchers attempted to make use of this fact to devise better monitoring, diagnostics and system, which were hitherto based on linear models. Theory of chaos, which explains many nonlinear phenomena comes handy for furthering the analysis using nonlinear model. In this study, measuring system will be constructed using multi-sensor (Tool Dynamometer, Acoustic Emission) in end millingprocess. Then, it will be verified that cutting force is low-dimensional deterministic chaos calculating Lyapunov exponents, Fractal dimension, Embedding dimension. Aen it will be investigated that the relations between characteristic parameter caculated form sensor signal and tool wear.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.93-101
• /
• 1997

Ever since the nonlinearity of machine tool dynamics was established, researchers attempted to make use of this fact to devise better monitoring, diagnostics and control system, which were hitherto based on linear models. Theory of chaos which explains many nonlinear phenomena comes handy for furthering the analysis using nonlinear model. In this study, measuring system will be constructed using multi-sensor (Tool Dynamometer, Acoustic Emission) in end milling process. Then, it will be verified that cutting force is low-dimensional chaos by calculating Lyapunov exponents. Fractal dimension, embedding dimension. And it will be investigated that the relation between characteristic parameter calculated from sensor signal and tool wear.