• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.32-38
• /
• 1998

For the purpose of monitoring the abnormal state in proportion to cutting in automatic production process, the 3 kinds of specimens different from mechanical properties by austempering through temperature variation were manufactured, and the effects of tool wear on thrust and AE RMS was analyzed with sequential drilling in in-process. When the ADI specimens were drilled, the relationship of thrust and AE RMS with flank wear was studied through experiments, and it is confirmed that the reliable wear state is able to be monitored by using these signals. It was shown that thrust and AE RMS increased slowly till flank wear reached to V$_{B}$ = 0.25mm, and they increased steeply over the value. The effective tool exchange time was able to be pre-estimated by using this fact. It was validated that the tool breakage was able to be detected on the real time by monitoring in in-process.s.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.10a
• /
• pp.163-167
• /
• 1996

The life of rolling elements depends on various factors such as operating conditions and material properties. In this work, the effect of microstructure on the rolling behavior is investigated. Specially, the deformations in the substrate regions before and after rolling are compared. It is found that rolling action causes severe flow of material in the direction opposite to the rolling direction in the case of dry rolling direction. With lubrication, the deformation is more severe at the subsurface region rather than at the surface.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.88-92
• /
• 2002

This research is about slurry wear of SM45C and SUS304, which using standard sand and KUM river sand. The results are as follows ; 1. Mass loss rates of both standard sand and KUM river sand were linearly increased as increasement of time and velocity. 2. The average diameter of sand from relatively, less wear rate and portion of larger particles. 3. Wear resistance was linear with time and velocity of liquid jet regardless of type of sand. Also, it was able to evaluate with the formula, $HV^2$/E calibrated with n, the velocity index. 4. The wear surface in liquid jet experiment was smooth. The maximum wear depth was observed at the location 2~4mm apart from the center in the condition of $90^{\circ}$ of collision angle 6mm of nozzle diameter, and 20mm of collision distance. The sectional shape in radial appeared as 'W'shape.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.798-801
• /
• 2001

This research is about slurry wear of SM45C and SUS304, which using standard sand and KUM river sand. The results are as follows ; 1. Mass loss rates of both standard sand and KUM river sand were linearly increased as increasement of time and velocity. 2. The average diameter of sand from relatively, less wear rate and portion of larger particles. 3. Wear resistance was linear with time and velocity of liquid jet regardless of type of sand. Also it was able to evaluate with the formula, HV2/E calibrated with n, the velocity index. 4. The wear surface in liquid jet experiment was smooth. The maximum wear depth was observed at the location, 2~4mm apart from the center in the condition of 90$^{\circ}$of collision angle 6mm of nozzle diameter, and 20mm of collision distance. The sectional shape in radial appeared as 'W' shape.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.3
• /
• pp.257-263
• /
• 1984

저항 점 용접시 발생하는 어려운 문제점의 하나는 아무리 동일한 용접조건 하에서 용접을 한다하 더라도 균일한 용접품질을 얻을 수 없다는 점이다. 이는 주로 용접중의 전원에서의 변화로 인한 용접전류 및 전압변동, 용접모재의 표면상태 및 두께의 불균일, 두 전극의 마멸 및 맞춤상태 등의 인자 때문에 기인한다고 볼 수 있다. 이러한 문제점을 해결하기 위해서는 용접하는 도중에 수시 로 인자 때문에 기인한다고 볼 수 있다. 이러한 문제점을 해결하기 위해서는 용접하는 도중에 수 시로 용접 상태를 점검하여 용접조건을 그때 그때에 적합하게 변화시켜 주는 것이 바람직한데 우 선 용접상태를 판별하기 위해서는 용접품질(weld quality)을 잘 대변할 수 있는 용접법 변수를 찾 아내는 것이 중요한 일이다. 따라서 본 논문에서는 용접품질에 관련되는 변수중, 전기동저항과 전 극분리현상을 측정해서 마이크로 컴퓨터를 사용하여 관련되는 특정값들을 구했고 이들과 인장실 험에서 얻은 용접강도와의 상관관계를 얻음으로써 과연 어떠한 공정변수가 용접품질을 잘 대변해 줄 수 있는가를 실험적으로 조사하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.159-163
• /
• 2001

마찰구동은 다른 구동방식에 비하여 구조가 간단하고, 기계적인 정도를 얻기 쉬우며, 백래쉬 등에 기인하는 비선형 요소인 로스트모션이 없고 관성이 작아 구동력이 작은 이점이 있다. 그 반면에 접촉부에서 미끄럼이 발생하여 큰 구동력을 얻기 어렵고 마찰저항에 의하여 마멸이 생기는 결점이 지적되고 있다. 본 연구에서는 초정밀가공기용 위치결정기구로 마찰구동기구를 사용하기 위하여 위치 결정도에 관한 설계, 구동력의 설계 및 재료의 선택에 관하 여 분석하고 시작품을 제작하여 특성을 연구하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06a
• /
• pp.25-30
• /
• 1995

본 연구에서는 건식 구름접촉시 발생하는 tribological한 현상들을 plate on ball tester를 이용하여 실험적으로 고찰하였다. 실험의 주된 관심은 각 열처리 방법으로 제작한 시편에 대하여 건식 구름접촉시 cycle수에 따른 plate의 표면 거칠기, 트랙의 형상, 졍도 및 구름저항의 변화이며 이런 자료를 토대로 열처리공정의 차이에서 오는 정도수명 및 피로수명에 대한 상대평가를 통해 마찰, 마멸의 저감에 적합한 열처리방법을 제시하고자 한다.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.211-218
• /
• 2000

The effects of alloying elements, Cr, Mo, and N on repassivation characteristics of stainless steels were investigated by using the abrading electrode technique and a.c impedance spectroscopy. The role of alloying elements on the stability of passive film and their repassivation characteristics were examined using alloy steels such as Fe-Cr, Fe-Cr-Mo, 304, 304LN, 316, and 316LN. The electrochemical characteristics of the passive film were investigated by in-situ d.c. and a.c. electrochemical methods. Localized corrosion resistance is believed to have much to do with the stability and repassivation characteristics of the passive film. The effects of alloying elements on the current transients and repassivation kinetics were systematically examined by using the abrading electrode technique and a.c. impedance spectroscopy. The experimental results were analyzed in order to elucidate the relationship between passive film stability, repassivation characteristics, and alloying elements.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.604-610
• /
• 1989

This paper is concerned with the machinability of fine ceramics(Al$_{2}$O$_{3}$) by using sintered diamond tools. For this purpose, ceramics cutting experiments under various cutting conditions such as cutting speed, feed rate, and others were carried out. The main results are follows : (1) During the cutting of fine ceramics, the used tools were found to be slightly chattering at cutting speed of 70m/min, and at cutting speed of higher than this I found the fine ceramics difficult to be cut. (2) When I used a tool with large nose radius, there occured a small amount of wear on the flank of the tool. However, at the early stage of fine ceramics cutting, the tools with smaller nose radii were required mainly to prevent the chipping of the ceramics. (3) When the materials were dry-cut, the appropriate cutting speel was found to be lower than 40m/min, and when the materials were dry-cut, I could cut them without any difficulty even at the speed of 70m/min, the surface roughness of ceramics cut at the speed of 70m/min was considerly fine. (4) It is generally believed that the principal cutting force is the largest in the case of steels cutting, but I found the thrust cutting force to be larger than any other cutting forces in the case of ceramics cutting.

• Tribology and Lubricants
• /
• v.32 no.3
• /
• pp.88-94
• /
• 2016

We conduct a series of fretting corrosion tests on tin-coated electric contact to evaluate the effects of lubricant on fretting corrosion behavior. We perform these tests with a constant contact force at 25℃ 50℃, 75°C, and 100℃. In the tests with a span amplitude of 30 μm, we could not determine the conventional behavior of the first, second, and third stages of the change in electric resistance during fretting corrosion and observed that the contact resistance continuously increases with the cycles. This behavior is due to the fact that the generation of oxides on the tin-coated contact is controlled and stabilized by the presence of lubricant. SEM observations on samples with a span amplitude of 77 μm at all testing temperatures confirm that there is less oxide debris on the fretting damaged surface. Hence, for tin-coated electric connector, the effect of lubrication on the lifetime of the electric contact increases as the fretting span decreases and testing temperature increases, compared to those for connector without lubricant. Especially, for a specimen with a span amplitude of 30 μm at 100℃, the increment in contact lifetime due to lubricant is found to be more than 20 times, compared to that without lubricant.