• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.139-143
• /
• 2011

금속분말을 청정 에너지원으로 이용하기 위해 금속분말 소형 연소기의 구현이 필요하다. 이를 위한 기초 연구로서 점화성이 뛰어나면서도 경제적인 수십 마이크로 크기의 마그네슘(Mg) 분말을 대상으로 고온 증기(steam)와의 연소 현상 대해 연구하였다. 본 연구에서는 연소실 내 체류시간 및 혼합 효율을 증가시키기 위해 와류 유동을 연소기에 적용하였고 아르곤(Ar) 이송가스를 이용해 마그네슘 분말을 공급하였다. 안정한 화염을 유지시키기 위하여 이송가스의 유량을 변화시켜 공급되는 마그네슘의 양을 조절하였고, 고온 증기의 공급량은 니들 밸브의 개도를 조정하거나 우회시킨 관로로 증기의 일부를 배출함으로써 조절하였다. 고온의 점화원을 사용하여 증기 분위기 내 마그네슘 분말을 점화시켜, 대기압 환경에서 마그네슘/증기/아르곤의 지속적인 화염을 구현하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.117-121
• /
• 2003

Nickel(Ni) powders were prepared from the mixture of nickel chloride and magnesium stearate by a hydrogen reduction process, and the effect of reaction temperature and the addition of magnesium stearate on the chracteristics of the powders were investigated. The effect of size reduction of nickel particles was observed in the presence of magnesium stearate owing to the inhibition of excess growth of paricles. The size reduction and the degree of agglomeration of the particles affected by the amounts of liqiud phase, which related to the increase of magnesium stearate.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.663-672
• /
• 2022

The purpose of this study is to evaluate the magnesium sulfate resistance of a geopolymer mixed with rice husk powder. General concrete, silica fume mixed concrete, and binary blended geopolymer were selected as comparison targets to confirm the magnesium sulfate resistance, and sulfate deterioration was calculated using the compressive strengths with ages. In addition, the weight change rate and the relative dynamic coefficient of the geopolymer were comparatively analyzed, and the degree of etteringite formation was confirmed using X-ray diffraction analysis. the experiment, the geopolymer mixed with 10% rice husk powder showed 10.8% higher compressive strength than concrete with silica fume when submerged for 56 days. Also, the geopolymer mixed with rice husk powder showed a small weight change rate of 0.9 to 1.45%. composition after immersion in magnesium sulfate through X-ray diffraction analysis, it was observed that a small amount of ettringite was dispersed in the geopolymer containing rice husk powder. Thus, there is a high correlation with the corrosion resistance of magnesium sulfate

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.28-28
• /
• 2003

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.114-115
• /
• 2014

Recently, the construction structure repeats the brilliant development including the shper high rising, high functionalization, environmental friendliness, conversion to ubiquitous, and etc. upon with the construction industry development and it is continually soothed. Meanwhile, as to the construction structure of the modern society, the research for corresponding to the box-frame construction way where the response to the diversity of the life of the occupant is difficult is needed. Thus, the lightweight of the structure is the important factor in order to secure the functionality. Therefore, this research tries to study the water absorption ratio and flexural strenght of the magnesium oxide light weight matrix according to the powdery modified sulfur addition ratio.

• Resources Recycling
• /
• v.32 no.2
• /
• pp.19-32
• /
• 2023

A novel method for the synthesis of titanium hydride powder from titanium tetrachloride via the magnesiothermic reduction in an hydrogen gas atmosphere was investigated. To examine the influence of temperature on the formation of titanium hydride, the reduction was conducted at 1023~1123 K under 1 atm of hydrogen gas atmosphere for approximately 30 min. Subsequently, the titanium hydride powder was sintered by maintaining the temperature for 0~120 min, and the decrease in the oxygen concentration of the powder was investigated. The experimental results showed that TiH_1.924 was produced at 1023 K, whereas mixtures of TiH_1.924 and TiH_1.5 were produced at 1073 K and 1123 K. In addition, the hydrogen concentration in the powder decreased with increasing temperature. The concentration of oxygen in the powder decreased with increasing temperature and sintering time owing to the decrease in the specific surface area of the powder. The minimum concentration of oxygen was 0.246 mass% when the mixture of TiH_1.924 and TiH_1.5 was obtained at 1073 K and a sintering time of 120 min.

• Proceedings of the Culinary Society of Korean Academy Conference
• /
• 2002.04a
• /
• pp.27-41
• /
• 2002

뽕잎분말과 실크펩타이드를 첨가한 기능성 다식의 일반 성분, 무기질함량, 관능검사 측정결과 $\circledcirc$ 일반성분 분석결과에서 뽕잎분말과 실크펩타이드를 첨가한 비율이 증가할수록 다식의 조단백질 및 조회분 함량이 대조군에 비해 유의하게(p<0.05) 증가 $\circledcirc$ 무기질함량은 뽕잎분말과 실크펩타이드 첨가비율이 증가할수록 칼슘, 마그네슘 및 칼륨 함량이 유의적 (p<0.05) 으로 증가 $\circledcirc$ 뽕잎분말과 실크펩타이드 첨가비율에 따른 기능성다식의 관능검사 결과 2% 첨가군이 각각의 대조군이나 1%. 3%, 4% 첨가군에 비해 좋게 평가

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.11a
• /
• pp.21-21
• /
• 1998

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.94-101
• /
• 2016

This paper presents an investigation into the durability alkali-activated materials(AAM) mortar and paste samples manufactured using fly-ash(FA) and ground granulated blast furnace slag(GGBFS) exposed to a sulfate environment with different GGBFS replace ratios(0, 30, 50 and 100%), sodium silicate modules($Ms[SiO_2/Na_2O]$ 1.0, 1.5 and 2.0) and initial curing temperatures($23^{\circ}C$ and $70^{\circ}C$). The tests involved immersions for a period of 6 months into 10% solutions of sodium sulfate and magnesium sulfate. The evolution of compressive strength, weight, length expansion and microstructural observation such as x-ray diffraction were studied. As a results, as higher GGBFS replace ratio or Ms shown higher compressive strengths on 28 days. In case of immersed in 10% sodium sulfate solution, the samples shows increase in long-term strength. However, for samples immersed in magnesium sulfate solutions, the general observation was that the compressive strength decreased after immersion. The most drastic reduction of compressive strength and expansion of weight and length occurred when GGBFS or Ms ratios were higher. Also, the XRD analysis of samples immersed in magnesium sulfate indicated that expansion of AAM caused by gypsum($CaSO_4{\cdot}2H_2O$); the gypsum increased up to 6 months continuously.

• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.225-233
• /
• 2011

The volume change in concrete takes place with changes in temperature and water content immediately after concrete casting. In the early age stage, the thermal and drying shrinkages can cause cracks that are very crucial to the durability of concrete. It was reported that when the cement with lightly-burnt MgO powder was used, the shrinkage of concrete can be reduced. This study investigates fundamental properties of cement composites with lightly burnt MgO powder by performing various experiments. The stability test results verified that MgO powder in cement composites does not cause any abnormal expansion. Also, the hydrate product analysis results obtained from MgO cement paste showed that MgO powder reduces the shrinkage at the longterm ages. In addition, the cement composites containing the proper amount of MgO powder could improve compressive strength. Finally, the shrinkage reduction from using MgO powder can be optimized by increasing MgO replacement level and curing temperature.