• Title/Summary/Keyword: 링크장치

Search Result 248, Processing Time 0.027 seconds

Design and Implementation of an Access Station/User Equipment Modem Verification Apparatus for High Speed Mobile System (초고속 무선 전송 시스템 기지국/단말 모뎀 검증 장치의 설계 및 구현)

  • Jang, J.D.;Park, H.J.
    • Electronics and Telecommunications Trends
    • /
    • v.21 no.1 s.97
    • /
    • pp.94-103
    • /
    • 2006
  • 기지국/단말 모뎀 검증 장치(MAT)는 기지국(AS) 모뎀, 단말(UE) 모뎀으로 구성되는 초고속 무선 전송 시스템(HM20) MIMO 구조 기지국/단말 모뎀의 자체 기능 검증과 기지국 모뎀과 단말 모뎀의 연동 시험시 오류 원인을 분석하기 위하여 상향 링크(UL)와 하향 링크(DL)의 송. 수신단의 정합부에 디지털 및 아날로그 정합을 이용하여 기지국모뎀과 단말 모뎀이 정상적으로 동작하는지를 시험하게 된다. 모뎀 검증 장치(MAT)는 상향 링크 신호는 단말 변조기의 송신 신호 수신과 기지국 복조기에 변조 신호를 송신, 하향 링크 신호는 기지국 변조기의 송신 신호 수신, 단말 복조기에 변조 신호를 송신하는 기능을 수행하여 상향 링크 신호와 하향 링크 신호를 시험 및 분석하는 기능을 수행한다.

철도 정보전송을 위한 프로토콜 엔지니어링 기술

  • 황종규;이재호
    • Journal of the Korean Society for Railway
    • /
    • v.7 no.2
    • /
    • pp.12-17
    • /
    • 2004
  • 철도 신호제어장치들은 각자 고유기능을 수행함으로써 철도시스템의 안전운행을 도모하고 있다. 따라서 대부분의 신호장치는 바이탈한 제어장치로서 안전측 동작(Fail-safe)을 보장하기 위하여 기존에는 기계적 또는 전기적인 계전기 로직에 의해 각 장치 고유의 기능을 수행하였다. 그러나 최근에 들어 전자, 컴퓨터, 통신 기술의 발달에 따라 철도신호제어장치들도 전자화된 장치들로 대체되어가고 있는 추세이다. 이처럼 신호제어장치들이 전자화되어감에 따라 각 장치간 인터페이스를 위한 링크도 디지털 통신채널로 대체되어가고 있다. 따라서 이러한 각 장치간 인터페이스를 위한 통신링크에 대한 중요성이 증대되고 있다. (중략)

Block Linked List Scheme to Reduce GC (Garbage Collection) Overhead in Flash Memory (플래시 메모리 GC (가비지 콜렉션) 오버헤드를 줄이기 위한 블록 링크드 리스트 기법)

  • Koo, Sohyun;Kim, Sungsoo;Chung, Tae-Sun
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2014.11a
    • /
    • pp.70-72
    • /
    • 2014
  • 플래시 메모리는 소형 저장 장치뿐만 아니라 대용량 저장장치까지 응용되고 있다. 하지만 기존의 하드디스크 (HDD)와 다르게 플래시 메모리는 읽기, 쓰기, 소거 연산의 속도가 다르고 쓰기 전 지우기(erase before write)라는 특성 때문에 FTL의 한 메커니즘인 GC (Garbage Collection)를 수행할 때 많은 오버헤드가 발생한다. 이에 이 논문은 DRAM의 공간을 효율적으로 활용하고 유효한 페이지 복사와 소거 연산의 횟수를 줄여 전체적인 플래시 메모리 GC 오버헤드를 줄이기 위한 블록 링크드 리스트 기법을 제안한다. 블록 링크드 리스트 기법은 같은 LBN에 해당하는 데이터를 로그 블록에 적고 해당 로그 블록들을 링크드 리스트로 관리해 소거 연산을 미룰 수 있다. 링크드 리스트들에 관한 정보는 DRAM에 테이블 형태로 적는다. 이때 테이블에는 블록 주소들이 적히므로 페이지 단위로 링크드 리스트를 관리하는 다른 기법에 비해 DRAM의 공간을 효율적으로 활용하게 된다.

Point-to-Point Communication of Cognitive Radios via Underlay Spectrum Sharing (언더레이 주파수 공유를 이용한 인지무선 통신장치의 점대점 통신방법)

  • Lee, Hye-Won;Han, Kwang-Hun;Hwang, Young-Woo;Choi, Sung-Hyun
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.9A
    • /
    • pp.697-703
    • /
    • 2009
  • Cognitive radios are typically known to exploit vacant spectrum resources in order not to interfere with primary communication systems. However, cognitive radios may not be able to secure a clear spectrum band in a bustling spectrum band. Underlay spectrum sharing provides a way to cope with such a spectrum sharing problem. Cognitive radios share the same spectrum band with the spectrum licensees, i.e., primary users, by adjusting signal transmission power so as not to severely deteriorate the performance of the primary users. We propose an underlay spectrum sharing policy leveraging uplink spectrum resource to be used in a cellular network. A pair of end terminals attempts to establish a direct point-to-point link, and perform as cognitive radios in the sense that they share the uplink radio resource of other primary users. We formulate the transmit power constraints of the cognitive radios and propose a practical uplink band sharing framework. Our simulation results demonstrate that such an uplink sharing underlay direct link can enhance the throughput performance of point-to-point link with low overhead.

Study on design of the composite torque link for a landing gear system of a helicopter (헬리콥터 착륙장치를 위한 복합재 토크링크의 설계에 대한 연구)

  • Kim, Jin-Bong;Um, Moon-Kwang;Lee, Sang-Yong;Kim, Tae-Uk;Shin, Jeong-Woo
    • Composites Research
    • /
    • v.22 no.2
    • /
    • pp.30-36
    • /
    • 2009
  • In this paper, we propose the design method for the composite torque link of a landing gear for a helicopter. The composite torque link has to be light weighted and very stiff to keep the shock absorber in the landing gear of helicopter. The configuration and structural shape has to be designed in consideration of the RTM (Resin Transfer Molding) manufacturing process which is adopted to minimize the manufacturing cost. The mechanical properties are obtained through the coupon tests with the specimens made by the same manufacturing process for the composite structure. The optimal design process was performed through iterative modifications of the models which were verified by stress analysis using FEM. The composite torque link has lug-shaped parts and is very thick, so 3D Layered solid elements of ABAQUS were used to get the stress field including the stress components in thickness direction and non-linear static analysis using contact B.C. of rigid-deform condition was used to get the optimal design.

Operational Characteristics of a Domestic Commercial Semi-automatic Vegetable Transplanter (상용 국산 반자동 채소 정식기의 작동 특성 분석)

  • Park, Jeong-Hyeon;Hwang, Seok-Joon;Nam, Ju-Seok
    • Journal of agriculture & life science
    • /
    • v.52 no.6
    • /
    • pp.127-138
    • /
    • 2018
  • In this study, the operational characteristics of a domestic vegetable transplanter were investigated. The main functional components and power path of the tranplanter were analyzed. The link structure of transplanting device waskinematically analyzed, and 3D modeling and dynamic simulation were performed. Based on this analysis, the trajectory of the bottom end of the transplanting hopper was analyzed. Also, the plant spacing according to the engine speed and the shifting stage of transplanting transmission was analyzed and verified by field test. As main results of this study, the transplanting device is one degree of freedom(DOF) 4-bar link type mechanism which comprises 10 links and 13 rotating joints. The transplanting hopper plants seedlings in a vertical direction while maintaining a constant posture by the links of transplanting device. The power is transmitted to both the driving part and transplanting part from the engine, and the maximum and minimum plant spacing of the transplanting device were 428.97 mm and 261.20 mm.

Link Control Protocol Design for Communication Processing Nodes (통신처리 노드의 링크 제어 프로토콜 설계)

  • 양미정;유재호;김대웅
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 1998.11a
    • /
    • pp.309-312
    • /
    • 1998
  • 대용량 통신처리시스템은 전화망 및 ISDN 가입자에게 패킷망, 인터넷을 통해 PC 통신 서비스나 인터넷 서비스를 제공하는 것을 목적으로 하는 정보 서비스 게이트웨이 장치이다. 각종 망의 인터페이스를 담당하는 망 정합장치들은 대용량 통신처리시스템내의 내부 전달망을 통하여 연동하는 구조를 가지며, 망 정합장치들간의 연결을 통해 정보 제공 서비스 및 과금 회수 대행 등의 관리 서비스들이 이루어진다. 따라서, 이들 망 정합장치간의 신뢰성 있는 데이터 전달을 보장하기 위해서 두 장치간에 연결형 데이터 링크의 설정이 요구된다. 본 논문에서는 이러한 이종망 상에서의 통신처리 노드간 링크 제어 프로토콜을 제안한다.

  • PDF

Offset Slider-Rocker Linkage Synthesis Using Transmission Angles as Synthesis Parameters (전달각을 이용한 오프셋 슬라이더-로커 링크장치의 합성)

  • Gwon, Seong-Gyu
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.24 no.4 s.175
    • /
    • pp.881-893
    • /
    • 2000
  • An analytical synthesis technique for offset slider-rocker 4-bar linkages is devised where transmission angles are used as essential synthesis parameters. Finding the location where both the maximum and the minimum transmission angles arise leads to establishing the algorithm for limiting transmission angles of the slider-rocker linkage which has different offsets according to the direction of the slider. Position analysis by the algorithm gives formula for the dimensional synthesis for the linkage. Application to examples shows that the algorithm and the formula yield proper slider-rocker linkages with regard to limiting transmission angles to the maximum value.

증기발생기 스너버 링크장치 계통의 기하학적 해석

  • 이상호;윤기석;김태완;전장환;김종민
    • Nuclear Engineering and Technology
    • /
    • v.29 no.6
    • /
    • pp.42-48
    • /
    • 1997
  • 원자로 냉각재 계통의 주요 구성요소중의 하나인 증기발생기는 원자로의 정상운전 과정에서 발생되는 고온의 열에너지를 2차 측으로 전달하여 터빈을 구동하기 위한 증기를 생산하는 역할을 하게 된다. 동적하중으로부터 증기발생기를 보호하고, 정상운전시 고온 고압에 의해 발생하는 열팽창을 흡수하기 위하여 유압식 스너버를 이용하여 증기발생기를 지지한다. 본 연구에서는 증기발생기 스너버의 이동거리를 해석하기 위한 링크장치의 기하학적 계통을 모델링하여 제시하고, 스너버의 이동거리 해석에 영향을 미치는 인자를 추출하여 검토하였다. 또한 스너버의 강성값 결정 과정에서 요구되는 레버기구의 하중분담율을 해석할 수 있는 방법을 개발하였다. 해석 결과의 타당성을 검토하기 위하여 현재 건설중인 1000Mwe급 표준 가압형 경수로 발전소의 고온 성능시험과정에서 실측한 결과와 비교 검토하였다.

  • PDF

A Study on Position Estimation for UAV using Line-of-sight Data-link System (가시선 데이터링크를 이용한 무인기 위치 추정에 관한 연구)

  • Park, Jae-Soo;Song, Young-Hwan;Lee, Byoung-Hwa;Yoon, Chang-Bae
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.11 no.11
    • /
    • pp.1031-1038
    • /
    • 2016
  • In the UAVs, the position error of the inertial navigation system is constantly increased when global positioning system goes wrong due to interference. It makes impossible to ensure mission and flight safety. If the data-link system provide the position of the UAV for inertial navigation system periodically, then the UAV may operate normally under malfunction of the global positioning system. In this paper, we introduce an algorithm for estimating the position of the UAV using the monopulse tracking and distance measurement of the line-of-sight data-link system. Also, we propose a method to improve the performance of position estimation. And we assured ourselves that this method can be applied in the UAVs.