• Defense and Technology
• /
• no.9 s.247
• /
• pp.62-73
• /
• 1999

최근 전자기술을 적극적으로 활용하는 제어시스템이나 기기의 증가 추세가 예상외로 빠르게 증가하고 있다. 지금까지 유압이나 공기력으로 작동되었던 시스템 또는 릴레이나 스위치 등의 전기부품으로 구성된 시스템에 마이크로 프로세서를 중심으로 하는 디지털 기술을 도입하여 소형, 경량화가 가능하게 되고 성능이나 기능도 비약적으로 고도화 되고 있다

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.19-27
• /
• 2013

This paper implements the standby power control system composed of a master device and slave devices. The standby power is managed by cutting power supply after controlling the relay of a slave device based on the authentication of master device's RFID card. RFID interface and wireless communication module are embedded in a master device, and one master device is linked with many slave devices in wireless. Each slave device executes the operation needed in power control independently. We implements the function of manual power on/off system in a slave device, and the function of user ID enrollment by switch manipulation in a master device. Also this system can communicate bidirectionally in wireless and runs on TinyOS. The result of experiment shows that the user authentication is executed in a master device and this authenticated information is transmitted to a slave device in wireless, and standby power is cutted by controlling the relay of a slave device. Installing this system in a building or an office, we can expect energy saving.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2831-2834
• /
• 2003

본 논문에서는 PWM 방식을 이용한 THERMO-CON 제어 회로를 제안하였다. 제안한 회로는 정전압을 형성하기 위한 레귤레이터, 신호를 처리하기 위한 op-amp, 삼각파를 만들기 위한 OSC, 그리고 부하의 상태를 감지하기 위한 AMC 와 ISC 로 구성된다. 테스트 결과 서지 전압인가 시 PWM 방식으로 동작하여 회로의 P/sub D/(Power Dissipation)을 줄여 소자의 파괴를 막고 중부하 시(여러 개의 릴레이 구동 시) PWM 동작을 하여 소자의 파괴를 막는다는 것을 확인하였으며, 출력 쇼트 시 쇼트보호회로에 의해 출력 트랜지스터의 파괴를 막는다는 것을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1165-1166
• /
• 2011

본 논문에서는 대용량의 계통연계형 태양광발전시스템의 효율 개선을 위한 제어 알고리즘을 제안한다. 제안된 알고리즘은 태양전지로부터 생산되는 전체 전력량을 모니터링 하여 최대 효율 조건에서 동작할 수 있도록 구동시킬 인버터 수와 각 인버터가 담당할 전력량을 결정하고 이에 따른 태양전지의 직병렬 결합 조건이 가능하도록 태양전지의 배열을 릴레이 접점으로 재구성하는 방식이다. 제안된 알고리즘의 타당성 검증을 위해 LabVIEW 기반의 제어시스템을 구성하고 분석한다.

• The Magazine of the IEIE
• /
• v.7 no.3
• /
• pp.34-44
• /
• 1980

몸체부분에 3-자유도와 작업용핸드에 2-자유도를 갖는 원통좌표형 산업용로봇트의 구동용 서어보장치 설계에 관한 연구보고임. 몸체구동을 위한 서어보모터의 제어장치는 속도, 위치 및 전자자전류를 궤환시켜 구성한 피이드백시스템으로 싸이리스터 듀얼 콘버터(Thyristor dual converter)를 이용하여 평균직류전압에 DC 서어보모터의 속도를 제어하도록 구성하였으며 로봇트의 전체적인 동작은 릴레이를 사용하여 구동축을 선택하도록 하였는 바 속도응답특성을 보완하기 위하여 보상회로를 첨가하였음.

• 전기의세계
• /
• v.43 no.12
• /
• pp.67-72
• /
• 1994

ITU-T(구 CCITT)의 X.25에 기초한 패킷교환 방식은 회선교환에 비하여 대역폭을 효과적으로 사용할 수 있는 장점을 갖고 있으나 흐름제어와 오류제어 처리에 따른 지연으로 속도가 64Kbps로 제한된다는 것이 단점이다. 특히 90년대에 들어서부터는 문자 정보만 전송하던 80년대와는 달리 데이타량이 큰 그래픽 및 화상데이타의 전송수요가 늘어나고 있으며 LAN 및 클라이언트 서버 환경의 도입으로 대표되는 기업의 컴퓨팅 환경의 변화가 급속히 이루어지고 있어서 기업의 통신환경이 기존의 패킷교환 방식만을 갖고는 도저히 감당할 수 없게 되었다. 이에 따라 고속 패킷교환기술들이 80년대 후반부터 등장하기 시작하였으며, 공중 데이타망 기술로 대표적인 것은 프레임릴레이(FR), SMDA(Switched Multimegabit Data Service), ATM(Asynchronous Transfer Mode) 등이다.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.104-110
• /
• 2006

A design and control of electrostatic suspension system for flexible objects is presented. A number of electrode pairs of which the number depends on the object flexibility are positioned above the object and the voltages applied to each electrode pair are controlled, independently on the others, on the basis of the gap length. To implement the system with low cost and compactness, switched-voltage control scheme that is based on the relay feedback control is utilized. Relay feedback control method deploys only a single high-voltage power supply that can deliver a DC voltage of positive and/or negative polarity and thus high voltage amplifiers that are costly and bulky are not needed any more. It is shown that despite the inherent limit cycle property of the relay feedback based control, an excellent performance in vibration suppression is attained due to the presence of a relatively large squeeze film damping originating from the electrodes and levitated object. Employing fourteen electrode pairs, a thin aluminum plate with a thickness of 0.1 mm has been suspended at a gap length of 0.75mm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.580-581
• /
• 2018

In order to reduce end-to-end delay in EH-WSN (energy harvestin wireless sensor netowk), medium access control protocols using multi-hop routing technique have been studied. In a real environment, there are many situations where it is difficult to harvest enough energy than the energy consumed. Therefore, it is required to design a MAC protocol that allows nodes to reliably relay data without exhausting power in multi-hop transmission. In this paper, we propose a power-efficient MAC protocol that can select the relay node according to the residual power and the energy collection rate to increase network lifetime.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.71-79
• /
• 2008

In the manufacture of flat panel display devices, there is a strong demand for contactless glass panel handling devices that can manipulate a glass panel without contaminating or damaging it. To fulfill this requirement, an electrostatic suspension device far glass panels where the glass panel is supported by electrostatic forces without any mechanical contact is proposed. To implement the system with low cost and compactness, switched-voltage control scheme that is based on the relay feedback control is utilized. Relay feedback control method deploys only a single high-voltage power supply that can deliver a DC voltage of positive and/or negative polarity and thus high voltage amplifiers that are costly and bulky are not needed any more. It is shown that despite the inherent limit cycle property of the relay feedback based control, an excellent performance in vibration suppression is attained due to the presence of a relatively large squeeze film damping originating from the electrodes and levitated object. Using this scheme, a $100{\times}100mm^2$ glass panel was levitated stably with airgap variation decreasing down to $1\;{\mu}m$ at an airgap of $100\;{\mu}m$.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.2
• /
• pp.46-53
• /
• 2022

This paper presents the design and manufacture of a Solid State Relay (SSR) life prediction device that can predict the lifetime of an SSR, which is a key component of a glass forming machine. The lifetime of an SSR is over when the current supplied to the relay is overcurrent (20 A or higher), and the operating time is 100,000 h or longer. Therefore, the life prediction device for the SSR was designed using DSP to accurately read the current and temperature values from the current and temperature sensors, respectively. The characteristic test of the manufactured non-contact relay life prediction device confirmed that the current and temperature were safely measured. Thus, the SSR lifetime prediction device developed in this study can be used to predict the lifetime of an SSR attached to a glass forming machine.