• Title/Summary/Keyword: 리드선

Search Result 55, Processing Time 0.027 seconds

A Technique of Measuring Leadwire-Site for Automatic Leadwire Cutting Machines (리드선 자동절단기를 위한 리드선 위치측정법)

  • ;Seiichi Noguchi;Koei Igarashi
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.1
    • /
    • pp.120-130
    • /
    • 1994
  • The leadwire cutting machine that has been used recently cuts leadwires by putting one-side force with the same priciple as a saw, and applies a stress at soldered part of PCB. Because the stress becomes one cause of contact-defect, a leadwire cutting robot that cuts leadwire-site with nipper and does not apply stress is considered, In this paper a technique of detecting leadwire-site is studied for the purpose of using on automatic leadwire cutting robots. A technique deriving 2-dimensional site-information with many I-dimensional binary data of perspective front-view of PCB taken from various direction was proposed. Simulation and experiments were done under the same condition each other and a small universal PCB was choosen as an experimental object. As a result of simulations and experiments, the proposed technique turns out to be very useful for automatic leadwire cutting robots.

  • PDF

회원사소식

  • Korea Electronics Association
    • Journal of Korean Electronics
    • /
    • v.24 no.9
    • /
    • pp.58-61
    • /
    • 2004
  • PDF

An Improvement of Lead Wire Winding Claims: A Case Study -Packing Reel and Deployment of Winding Process- (리드선 권선클레임 개선사례연구 -포장용기개량 및 권선공정전개를 중심으로-)

  • 강인선
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.25 no.1
    • /
    • pp.49-55
    • /
    • 2002
  • For making a lead terminal(condenser, resistor etc.), it is the matter that lead wire have to be supplied smooth without twisting and curving when it is supplied to the further processing (cutting, forming, attach process) after it being forwarded. The purpose of this study is to solve the winding claims of lead wire through the structural expansion of winding equipment to which the improvement of packing equipment to forward safely and supply the lead wire and QFD method are applied. The results of this study is available to solve the technical problem caused by the installation of the existing flyer system for the prevention of twisting and can expect the quality assurance as it prevents the claim(surface fault) caused by the bumping among lead wire which are involved in the packing equipment in its moving stage.

업계소식

  • Korea Electronics Association
    • Journal of Korean Electronics
    • /
    • v.8 no.3
    • /
    • pp.82-85
    • /
    • 1988
  • PDF

High performance Plastic Quad Flat Package (PQFP) with The Strip Line Interconnect Structure (스트립 라인 배선 구조를 갖는 고성능 PQFP 패키지)

  • 권오경
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.5 no.1
    • /
    • pp.91-100
    • /
    • 1998
  • 본논문에서는 현재 다 핀용 패키지로 주종을 이루고 있는 기존의 PQEP의 성능을 향상시키기 위하여 스트립 라인 배선 구조를 갖는 새로운 PQEP를 제안하였다. 기존의 208 핀 PQFP와 제안한 208핀 PQFP의 전기적 특성을 Ansoft사의 Maxwell TMA사의 Raphael 과 Avanti사의 HSPICE를 이용하여 시뮬레이션하여 비교하였다. 새로운 패키지에서는 신호 선과 파워버스라인을 스트립 구조로 만들고 감결합커패시터를 장착하여 크로스톡 잡음과 스 위칭 잡음을 크게 감소시켰다. 패키지의 리드프레임을 스트립구조로 만들기 위하여 구리가 도포된 유연성 쿠폰을 리드프레임의양측면에 부착하였다. 신호선의 특성 임피던스는 쿠폰의 유전층 두께변화를 조절함으로써 최적화하였고 유전층 두께가 100$\mu$mdlfEo 45$\Omega$의 값을 얻 었다. 시뮬레이션 결과와 측정결과 32개의 소자가 동시에 스위칭하고 전원/접지핀이 전체 리드 수의 33%일 때 동작주파수가 330Mhz됨을 확인하였으며 이는 기존 PQFP의 최대 동 작주파수인 100MHz에 비하여 3배 이상 향상됨을 보였다.

Tension Monitoring of Prototype Smart Anchor for Geotechnical Disaster Prevention (지반방재용 스마트 앵커의 장력측정 및 하중전이 측정)

  • Kim, Young-Sang;Sung, Hyun-Jong;Kim, Jae-Min
    • 한국방재학회:학술대회논문집
    • /
    • 2010.02a
    • /
    • pp.90.2-90.2
    • /
    • 2010
  • 흙막이 굴착 및 절취사면의 보강공법으로 많이 적용되고 있는 앵커의 장력을 측정하는 전기저항식 로드셀과 스트레인게이지, 바이브레이팅 와이어 (vibrating wire) 타입의 모니터링 방법은 안전관리를 위한 장기적인 모니터링에 한계를 가지고 있어 이를 개선할 수 있는 방안으로 광섬유 센서를 이용하여 강연선의 변형률을 측정할 수 있는 스마트 텐던이 개발되었다(김재민 등, 2007). 앵커를 구성하는 7연 강연선(텐던)의 중앙케이블에 삽입된 광섬유브래그격자(Fiber Bragg Grating ; FBG)센서는 기존 스트레인게이지 타입에 비해 크기가 작고 내구성이 우수하며 전자기파에 의한 노이즈 발생이 없고 하나의 리드선으로 다중점 측정(multiplexing)이 가능하여 장기모니터링에 효과적인 장점이 있다. 본 연구에서는 FBG센서를 내장한 스마트 텐던을 실대형(Prototype) 앵커(L=11.5m)에 적용하여 현장 인발실험에 의해 시공중 장력 모니터링을 수행하고 로드셀 측정결과와 비교하였고 정착부에 설치된 FBG 센서로부터 앵커의 하중전이 계측을 수행하였다.

  • PDF

Study on Magnetic Property for Test Coil and Permanent Magnet (Test Coil과 영구자석의 자기 특성 연구)

  • Park, Yun Bum;Kim, Jong Wook;Lee, Jae Seon
    • Journal of the Korean Magnetics Society
    • /
    • v.26 no.5
    • /
    • pp.154-158
    • /
    • 2016
  • A CRDM (Control Rod Drive Mechanism) is an electromagnetic device which drives a control rod assembly linearly to regulate the reactivity of a nuclear core. An RPIS (Rod Position Indication System) is used as a position indicator for a control rod assembly of a CRDM of SMART, and an RPIS consists of permanent magnets and reed switches. SMART is designed for the maximum coolant temperature of $350^{\circ}C$, and the permanent magnets are installed inside of the reactor. The reed switches and electrical circuit are installed outside of the reactor on the other hand. Test coil for a reed switch is test equipment for quality verification of a reed switch, and a test coil consists of a coil and core. In this study, magnetic property of test coil and permanent magnet on a reed switch is compared by using finite element electromagnetic simulation.

A Study on the Thought of a Point in Mathematics (수학에 점의 사유에 대한 고찰)

  • Youn, Ho-Chang
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2012.05a
    • /
    • pp.141-142
    • /
    • 2012
  • 점과 선은 도형의 기초이며 수학과 물리학에서 중요한 요소라고 할 수 있다. 도형의 발달은 고대 이집트에서 이루어졌으며 이러한 도형의 발달은 그리스에서 체계화 되었으며 대표적으로 유클리드의 '기하학 원론'에서 점과 선에 대한 정의와 공리 등에 인하여 기하학은 발전하였다. 이러한 점에 관한 정의는 시대에 따라 재해석되고 논쟁과 토론의 과정을 거쳐왔으며. 즉 '점이 부분이 없는 것'이라는 기하학 원론'의 정의는 점의 존재성에 대한 다양한 철학적 사유를 이끌었으며 19세기 수학 기초의 위기 속에서 다양한 수학적 접근법이 나타나게 되었다. 본 논문에서는 점의 기존의 정의와 다양한 접근 방법에 대해서 살펴보고자 한다.

  • PDF