• 제목/요약/키워드: 루프순환

검색결과 66건 처리시간 0.025초

극저온냉동기를 이용한 자연순환 루프의 실험 (Experiment of Natural Circulation Loop Using a Cryocooler)

  • 김민지;장호명
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2194-2199
    • /
    • 2007
  • An experimental study is performed to investigate the thermal and flow characteristics of subcooled liquid nitrogen in a natural circulation loop. Experimental apparatus is designed and constructed such that a closed loop is cooled at the top by a cryocooler and heated nearly at the bottom by cartridge heaters. Steady state is obtained by controlling the heating power to the cartridge heaters and a thin-film heater to reduce the cooling power of the cryocooler. Temperature is measured at several locations of the loop and the mass flow rate through the loop is estimated from the energy balance in terms of the measured temperatures. Experiment is repeated for various values of the vertical height between the cooling and heating parts. The results show that the heat transfer capability of the loop has a maximum at a certain value of height. The optimal height to maximize the heat transfer is in a good agreement with analytical prediction to take into account the buoyancy and viscous forces in the loop.

  • PDF

기체-고체 유동층에서 루프실의 형상이 고체순환에 미치는 영향 (Effect of Loop Seal Geometry on Solid Circulation in a Gas-Solid Fluidized Bed)

  • 류호정;조성호;이승용;이도연;남형석;황병욱;김하나;원유섭;김정환;백점인
    • 한국수소및신에너지학회논문집
    • /
    • 제30권4호
    • /
    • pp.312-319
    • /
    • 2019
  • Effect of loop seal geometry on solid circulation characteristics was investigated with two different types of upper loop seals and lower loop seals in a gas-solid fluidized bed system. Upper loop seal which has a wide gap between solid intake and outlet parts requires more fluidization gas to maintain smooth solid circulation. Moreover, the lower loop seal which has a wide gap requires more fluidization gas to achieve the same solid circulation rate. These results can be explained by results of minimum fluidization velocity in the lower loop seals. Consequently, if a loop seal has a wide gap between solid intake and outlet parts, more fluidization gases should be fed to ensure enough solid circulation rate and smooth solid circulation.

핵연료조사리그 냉각수 유동 모의장치 개발 (Development of Coolant Flow Simulation System for Nuclear Fuel Test Rigs)

  • 홍진태;정창용;허성호;김가혜
    • 대한기계학회논문집A
    • /
    • 제39권1호
    • /
    • pp.117-123
    • /
    • 2015
  • 핵연료 연소시험 도중 핵연료봉에서 발생하는 열을 효과적으로 제거하기 위해서는 핵연료의 발열량을 정확하게 계산하고 충분한 유속을 갖는 냉각수를 순환시켜야 한다. 하나로는 개방형 수조 형태로서 핵연료 연소시험을 위한 별도의 냉각수 순환 루프를 갖추고 있는데, 여기에 핵연료 조사리그를 장착하고 냉각수를 순환시킴으로써 조사중인 핵연료봉의 온도를 일정온도 이하로 유지시킨다. 특히 순환되는 냉각수의 유속이 매우 높은 상태에서 조사리그 내에 부착된 부품이나 센서들이 유체유발 진동에 의해 파손되거나 기능을 상실하는 경우 매우 큰 기회비용을 야기한다. 본 연구에서는 조사리그 부품의 건전성 사전 검토 및 고속 유동에서의 센서 동작 특성에 대한 사전검토를 위해 냉각수 모의 순환장치를 개발하였다.

정보통신분야 중소벤처기업 지원정책에 관한 인지지도 분석 (Cognitive Map Analysis on the Policy of SMEs and Ventures in the Field of Information Technology)

  • 이중만;황규희
    • 한국콘텐츠학회논문지
    • /
    • 제13권11호
    • /
    • pp.347-355
    • /
    • 2013
  • 본 연구에서는 이명박 대통령의 연설문과 지식경제부의 IT중소벤처기업 지원정책에 대한 내용을 토대로 심층적인 인지지도 분석을 하였다. 또한 정책수단변수와 정책목표변수간의 관계분석을 통해 정책목표를 도출하고, 종합적인 인지지도를 활용하여 성장역량강화, 투자활성화, 창업활성화, 기술경쟁력 제고, 글로벌화, 고용창출 등 정보통신분야 중소벤처기업 지원정책방향을 제시하였다. 그리고 IT중소벤처기업 지원정책의 인지지도 분석을 통해 피드백 루프가 별로 없다는 점과 IT중소벤처기업 지원정책이 선순환 구조를 가지고 있는 양의 피드백 루프구조라는 것을 발견했다.

열원 냉각용 루프 써모사이폰의 작동 특성 (Performance Characteristics of a Loop Thermosyphon for Heat Source Cooling)

  • 최두성;송태호
    • 대한기계학회논문집B
    • /
    • 제28권12호
    • /
    • pp.1475-1483
    • /
    • 2004
  • Loop thermosyphon(LTS) has many good characteristics such as low thermal resistance, no power consumption, noiseless operation and small size. To investigate the overall performance of LTS, we have performed various experiments varying three parameters: input power of the heater, working fluid(water, ethanol, FC3283) and filling ratio of the working fluid. At a combination of these parameters, temperature measurements are made at many locations of the LTS. The temperature difference between the evaporator and the condenser is used to obtain the thermal resistance. In addition, flow visualization using a high speed camera is carried out. The thermal resistance is not constant. It is lower at higher input power, which is one of the distinct merits of LTS. Flow instabilities are frequently observed when changing the working fluid, the input power and the filling ratio. The results show that the LTS can be readily put into practical use. Future practical application in electronic cooling is recommended.

이동 속도 감응형 폐순환 무선전송기법 및 성능 분석 (A closed loop wireless transmission method adaptive to mobile speed and its performance analysis)

  • 하영석;최증원;김동현;오혁준
    • 한국정보통신학회논문지
    • /
    • 제23권12호
    • /
    • pp.1666-1672
    • /
    • 2019
  • 본 논문은 이동 속도 감응형 폐순환 무선전송기법 및 성능 분석에 관한 것으로서, 이동 속도에 따라 송신부에서 파일럿 신호를 전송하는 주기를 변경하고, 폐순환 동작을 위해 수신부에서 필요한 변경된 파일럿 신호 전송 주기에 대한 정보를 송신부에서 직접 전송하지 않더라도 수신부에서 전송된 파일럿 신호에 기반하여 간접적으로 이에 대한 정보를 추출할 수 있도록 하는 이동 속도 감응형 폐순환 무선전송기법을 제안하고, 제안된 기법의 우수성을 입증하기 위하여 페이딩 채널 환경에서 모의실험을 통하여 제안된 방법의 성능을 검증하였다. 성능 검증결과, 기존 방법과 비교하여 본 논문에서 제안하는 방법은 추가 전송되는 오버헤드 없이도 기존 방법의 성능을 뛰어넘는 우수한 성능을 보임을 확인하였다.

비도로 차량용 디젤엔진의 배기가스 저감에 관한 연구 (A Study of the Reduction of Diesel-Engine Emissions for Off-Road Vehicles)

  • 조규백;김홍석;강정호
    • 대한기계학회논문집B
    • /
    • 제35권6호
    • /
    • pp.577-583
    • /
    • 2011
  • 비도로 차량용 디젤엔진의 Tier 4 interim 규제를 만족하기 위하여 입자상물질과 질소산화물 배출량은 현행 규제 대비 각각 95%, 30% 저감되어야 하며, 입자상 물질을 저감하기위한 방법으로 디젤산화촉매, 부분유량 매연 여과장치 및 매연여과장치가 비도로 차량용 디젤엔진에 적용될 수 있다. 또한 질소산화물을 저감하기위해 배기가스 재순환방법, 선택적 환원촉매와 희박 질소산화물 포집장치 등이 적용될 수 있다. 본 연구에서는 56kW급 off-road 차량에서의 입자상물질과 질소산화물을 저감하기위해 매연여과장치와 고압루프 배기가스재순환 시스템이 연구되었다. 실험결과로서 디젤산화촉매와 매연여과장치는 입자상물질을 저감하는데 매우 효과적이었으며 낮은 배압과 함께 출력손실도 5%이내였다. 고압루프 배기가스재순환을 적용한 결과 중 저부하 조건에서 효과적으로 질소산화물을 저감하였으며 배기가스재순환율이 높을수록 질소산화물의 저감율도 증가하였다.

케미컬루핑 연소시스템을 위한 산소전달입자의 상온-상압 고체순환특성 (Solid Circulation Characteristics of Oxygen Carrier for Chemical Looping Combustion System at Ambient Temperature and Pressure)

  • 윤주영;김하나;김정환;이도연;백점인;류호정
    • 한국수소및신에너지학회논문집
    • /
    • 제28권4호
    • /
    • pp.384-391
    • /
    • 2017
  • Effects of operating variables on solid circulation rate were measured and discussed using two-interconnected circulating fluidized bed system at ambient temperature and pressure. OCN 706-1100 particles were used as oxygen carrier. The measured solid circulation rates increased as the lower loop seal gas flow rates and the solid height in the fuel reactor increased. Suitable operating conditions to avoid choking of the air reactor were confirmed. Continuous long-term operations of steady-state solid circulation were also demonstrated at two different conditions based on the operating window.

자연순환 루프에서 이상유동 특성에 관한 예비실험 연구 (Preliminary Experimental Study on the Two-phase Flow Characteristics in a Natural Circulation Loop)

  • 김재철;하광순;박래준;홍성완;김상백
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.308-311
    • /
    • 2008
  • As a severe accident mitigation strategy in a nuclear power plant, ERVC(External Reactor Vessel Cooling) has been proposed. Under ERVC conditions, where a molten corium is relocated in a reactor vessel lower head, a natural circulation two-phase flow is driven in the annular gap between the reactor vessel wall and its insulation. This flow should be sufficient to remove the decay heat of the molten corium and maintain the integrity of the reactor vessel. Preliminary experimental study was performed to estimate the natural circulation two-phase flow. The experimental facility which is one dimensional, the half height, and the 1/238 channel area of APR1400, was prepared and the experiments were carried out to estimate the natural circulation two-phase flow with varying the parameters of the coolant inlet area, the heat rate, and the coolant inlet subcooling. In results, the periodic circulation flow was observed and the characteristics were varied from the experimental parameters. The frequency of the natural circulation flow rate increased as the wall heat flux increased.

  • PDF

RPL 기반 IoT 네트워크에서 DIO Poisoning 오버헤드를 감소시키는 경로 복구 방법 (A Route Repair Scheme for Reducing DIO Poisoning Overhead in RPL-based IoT Networks)

  • 이성준;정상화
    • 정보과학회 논문지
    • /
    • 제43권11호
    • /
    • pp.1233-1244
    • /
    • 2016
  • 저전력, 저품질의 네트워크 환경인 LLNs(Low power and Lossy Networks) IoT 네크워크 환경에서는 IETF에서 제안한 IPv6 라우팅 프로토콜인 RPL이 대표적으로 사용된다. RPL은 루프가 존재하지 않는 방향성 비순환 그래프(Directed Acyclic Graph)를 생성하는 것을 목표로 하며, 이를 위해 loop avoidance, loop detection 메커니즘과 문제 발생 시 복구를 위한 DIO Poisoning 메커니즘을 정의하고 있다. 하지만, 기존의 DIO Poisoning은 루프 발생 노드에서 일어난 poisoning이 해당 노드의 서브트리로 전파되어 복구 시간과 컨트롤 메시지가 증가하는 문제점을 가지고 있다. 본 논문에서는 RPL 기반 IoT 무선 네트워크에서 루프 복구 과정 시 서브 트리의 라우팅 오버헤드가 추가로 발생할 수 있는 현상을 보완한 효율적인 경로 복구 기법을 제안한다. 개선된 RPL 루프 복구 과정에서는 기존 선호 부모로 선택될 수 없던 경로를 활용하여 빠르게 복구함으로써 새로운 경로설정을 위한 컨트롤 패킷 트래픽과 경로 복구 시간을 줄인다. 시뮬레이션을 사용하여 제안한 프로토콜이 기존 프로토콜에 비해 복구 시간 단축과 컨트롤 패킷의 감소를 통한 복구 성능을 향상시킬 수 있음을 알 수 있었다.