• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.660-665
• /
• 2014

다량의 무기물이 첨가된 고분자제품을 초박막의 두께로 고속생산 할 경우 가장 중요한 요소는 적절한 원재료의 선정도 중요하지만 대개의 경우 한정된 범위의 수지를 사용할 수밖에 없기 때문에, 가장 중요한 요소는 압출기내에서 흘러나온 용융수지의 흐름을 균일하게 유지할 수 있도록 고분자의 용융 유동에 적합한 최적의 다이스 설계와 압출기의 공정 파라미터의 제어를 통해 균일한 두께 유지와 연신이 필요하다. 이와 관련하여 고분자 압출필름의 적절한 연신을 위하여 압출조건이 연신에 미치는 영향에 대한 연구가 필요하지만 관련된 연구는 아직 충분히 이루어지지 않고 있다. 따라서 본 연구는 통기성 필름의 압출필름에 주로 사용되는 LLDPE(Linear Low Density Polyethylene)에 대하여 압출기의 실린더 온도, 압출속도, 압출기의 다이스온도, 냉각롤의 온도, 연신비, 그리고 연신롤 온도 등의 압출 조건의 변화가 압출필름의 연신에 미치는 영향에 대하여 압출실험을 통하여 연구하였다. 연구결과에서 연신비가 2.0:1일 때 고분자압출필름의 연신에 가장 큰 영향을 미침을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1861-1864
• /
• 2003

The objective of this study is to suggest the form rolling technology to produce high precision worm. Rack dies and roll dies are usually used to roll parts with worm teeth. The form roiling processes of worm shaft used as automotive part using the rack dies of counter flow type and the roll dies are considered and simulated by the commercial finite element code, DEFORM-3D. It is also important to determine the initial blank diameter in form rolling because it affects the quality of thread. The calculation method of the initial blank diameter in form rolling is suggested and it is verified by FE-simulation. The experiments using rack dies and roll dies are performed under the same conditions as those of simulation. The results of simulation and experiment in this study show that the from rolling process of worm shaft using the rack dies is decidedly superior to that using rolling dies from the aspect of the surface roughness and the profile of worm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.312-315
• /
• 2002

This paper summarizes the results of a numerical study conducted to analyze the effect of selected process parameters on material flow and thread profile in thread rolling of large diameter blanks. Based on the previous work where a plane strain mode was found to provide a reasonable approximation of the thread rolling process, the effect of varying thread form, friction factor, flow stress, and blank diameter on effective strain and thread height was analyzed using the finite element code DEFORM. This study show that effective strain for flank angle, that blank diameter had important effect on the as-rolled thread while flow stress, friction factor, and crest round of dies had significant impact on effective strain at the thread root and crest and load of thread rolling. While the rate of strain harding was found to have an effect on the crest profile, the results indicate that it is the primary factor responsible for seam formation in rolled threads.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.57-64
• /
• 2004

The objective of this study is to suggest the form rolling technology to produce high precision worm on the base of three dimensional finite element simulation and experiment. It is important to determine the initial workpiece diameter in form rolling because it affects the quality of tooth profile. The calculation method of the initial workpiece diameter in form rolling is suggested and it is verified by finite element simulation. The form rolling processes of worm shaft used as automotive part using both the rack dies of counter flow type and the roll dies are considered and simulated with the same numerical model as actual process by the commercial finite element code, BEFORM-3D. Deformation modes of workpiece between the form rolling by the rack dies of counter flow type and the roll dies are investigated from the result of simulation. The experiments using rack dies and roll dies are performed under the same conditions as those of simulation. The surface roughness, the straightness and the profile of worm are measured precisely using the worm shafts obtained from experiment. The results of simulation and experiment in this study show that the form rolling process of worn shaft using the rack dies is decidedly superior to that using roll dies from the aspect of the precision of worm such as the surface roughness, the straightness and the profile of worm.