• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.574-579
• /
• 2011

3-Roll coating process as a key application technology for manufacturing automotive pre-painted metal-sheets has been studied. The 3-Roll coating system for this study consists of pick-up roll for picking up and distributing coating liquid from the reservoir, metering roll to properly meter coating liquid in metering gap regime, and applicator roll for directly transferring liquid into metal-sheet surface. Flow dynamics and operable coating windows of a polymeric paint (primer) with shear-thinning rheological property have been correlated with processing parameters such as speed ratio and metering gap between pick-up and metering rolls. In the uniform coating regime, dry coating thickness increased with increasing metering gap or decreasing speed ratio. Ribbing and cascade instabilities were observed in low speed and high speed ratio conditions, respectively. It is revealed that lower speed ratio makes severity and wavelength of the ribbing increase, aggravating flow instability in coating systems.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.51-56
• /
• 2007

Feature functions were used for the classification of music. The spectral roll-off, variance, average peak level, and class were chosen to make up a feature function vector. Among these, it is the spectral roll-off function that has a low-frequency to high-frequency ratio. To find the optimal roll-off point, the roll-off points from 0.05 to 0.95 were swept. The classification success rate was monitored as the roll-off point was being changed. The data that were used for the experiments were taken from the sounds made by a modern violin and a baroque one. Their shapes and sounds are similar, but they differ slightly in sound texture. As such, the data obtained from the sounds of these two kinds of violin can be useful in finding an adequate roll-off point. The optimal roll-off point, as determined through the experiment, was 0.85. At this point, the classification success rate was 85%, which was the highest.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.869-876
• /
• 2011

It is important to analyze the dynamic behavior of counter-rotating rigid/deformable rolls in the roll-coating process, because the stability of the process is affected by the dynamic characteristics. In the present study, the effects of material property, angular velocity, and gap size on the contact pressure and contact shape of the deformable roll are numerically investigated. The behavior of two rolls with a negative gap was analyzed using the finite element method, and the material property of the deformable roll was applied with the Mooney-Rivlin coefficients of the hyper-elastic model. The contact shape is affected by the gap size, and the contact pressure mainly depends on the stiffness of the deformable roll and the gap size. To maintain a negative gap between two rolls, controls such as load and displacement controls must be used. The results indicate that displacement control can reduce the instability.

• Journal of Software Assessment and Valuation
• /
• v.16 no.1
• /
• pp.89-94
• /
• 2020

In this paper, we propose a software algorithm that can configure n-key roll-over that detects all keys without limitation on the number of pressed keys in the dynamic scanning detection of a keyboard composed of a matrix. The proposed algorithm uses the timer interrupt of the microcontroller for computer keyboard control, so that a constant and accurate detection interval can be obtained, and an accurate debounce time can be provided. In order to confirm the effectiveness of the proposed algorithm, a microcontroller was connected to a toy keyboard constructed in the form of a clavier and experiments were conducted. As a result of the experiment, it was confirmed that detection of all keys was performed accurately regardless of the number of keys pressed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.355-360
• /
• 2012

Cold drawn(CD) bars feature superb surface roughness, dimensional precision, and straightness. They are used in the manufacture of automotive parts and home electrical appliances. Two cross-roll straighteners have been used to manufacture CD bars for these industries. This study investigated the variation of the gap size between the two cross-rolls. It was found that changes in the gap size have a large influence on the residual stress and plastic deformation. Finite element method(FEM) simulations were performed to study the influence of the gap size on the residual stress in CD bars, and experiments were performed to verify the FEM results. The residual stresses were measured with X-ray diffraction in both the axial and the hoop directions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.56-61
• /
• 2010

This paper presents dynamic clearance verification considering engine movement for vehicle engine room package and validates through physical vehicle test. Traditionally, static clearance guide has been used for engine room package, but it's only 2-dimension criteria that results in requiring unnecessary space and it's not possible to conduct engine movement with real driving conditions. Thus, the dynamic DMU considers engine movement based on 28 load cases that are Roll Data analyzed by CAE for maximum engine movement and visualizes part-to-part dynamic clearance into virtual space. The dynamic DMU enables to develop compact engine room package without unnecessary space. The result of comparison between simulation and physical test has 0.892 correlation coefficient.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.1
• /
• pp.26-33
• /
• 2001

Thrust vector control system is control device which is mounted exit of the nozzle to generate pitch, yaw and roll directional force by deflecting flow direction of the supersonic jet from the nozzle. By obtaining control force, jetvane which is exposed in jet flow is working thermal and aerodynamic load. Axial thrust loss and side thrust is affected by shock patterns and interactions between jetvanes according to jetvane geometry and turning angle. In this study, we designed 6 types of jetvane to evaluate pitch, yaw and roll characteristics of ietvane in supersonic flow, and perform the cold flow test in range of turning angles of jetvanes between $0^{\cire}$ and $25^{\cire}$ by $5^{\cire}$ respectively. Also, calculation is going side by side to analyse flow interaction. Results show that there is no interactions between jetvanes upto turning angle 20$^{\circ}$, chord and lead length ratio is very important parameter to aerodynamic performance and maximum thrust loss is appeard to 17% of axial thrust in roll directional control.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.3
• /
• pp.353-358
• /
• 2011

This paper presents a virtual-legged walking model for bipedal robots and analyzes its fundamental RPY(Roll, Pitch, and Yaw) motion effects by simulation. For the purpose of identifying the motion effects of the bipedal walking, we assign some arbitrary trajectories both at the center of mass and at the center of pressure of the robot based on human walking. And then we verify the major moments to the roll, pitch, and yaw directions of the robot. As a result, it is shown that those motions are natural in the process of bipedal walking and they are deeply dependent on the step distance, the vertical level of the center of mass, and the acceleration of the robot. The importance of trajectory planning for the footstep location during a bipedal walking is finally addressed in terms of balance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.4
• /
• pp.8-17
• /
• 1998

Autonomous mobile robot agents(AMRAs) are robots which perform a given task by the same distributed self-organizing rules. In this paper, we let them form an equi-distance circle for the task of cooperative behaviors. Here, we suggest an algorithm to perform the taqk and then utilize a fuzzy system to improve the algorithm. It is shown that various cooperative activities appear in the simulation and particularly chaotic behaviors also appear by increasing the robot speed. Moreover, we prove the characteristics of this chaotic behaviors by calculating Lyapunov exponent.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.646-648
• /
• 2011

본 논문에서는 쌍롤 박판주조(Twin Roll Casting, TRC)법을 이용하여 AA4343 합금을 제작하였다. 주조시 롤 간격을 조절하여 냉각속도를 달리하였으며 인고트 주조(Ingot Casting, IC)법을 이용하여 제조된 합금과의 미세조직학적 차이와 이에 따른 물성 변화를 고찰하였다. TRC 및 IC로 제조된 합금을 냉간압연하였으며 압연 건전성을 평가하였다. 한편, 냉각속도별로 상이한 미세조직을 구현할 수 있는 스텝몰드(Step Mold Casting, SMC)법을 이용하여 제조된 합금의 냉각속도에 따른 미세조직 및 경도 차이를 조사하여 상대 비교하였다. 냉각속도가 빠를수록 주조 셀조직의 크기 및 공정 Si 입자의 크기가 감소하였으며 이로 인하여 경도가 증가되는 효과를 나타내었다. 주조시 생성된 공정 Si 입자의 크기는 압연에 의하여 그 크기의 변화가 거의 없었으며 열분석 결과 액상선 온도의 변화가 일부 발생하나 큰 차이가 없었다.