• Tribology and Lubricants
• /
• 제20권6호
• /
• pp.337-342
• /
• 2004

One of the serious challenges in developing rotary compressor with HFC refrigerant is the prediction of scuffing times and wear amounts between vane and roller surfaces. In this study, the tribological characteristics of sliding surfaces using vane-roller geometry of rotary compressor were investigated. The sliding tests were carried out under various sliding speeds, normal loads and surface roughness. During the test, friction force, wear depth, time to failure and surface temperature were monitored. Because severe wear occurred on vane surface, TiN coating was applied on sliding surfaces to prolong the wear life of vane-roller interfaces. From the sliding test it was found that there was the optimum initial surface roughness to break in and to prolong the wear life of sliding surfaces. Depending on the load and speed, the protective layers, which were composed of metallic oxide and organic compound, were formed on sliding surfaces. Those would play an important role in the amounts of friction and wear between roller and vane surfaces.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제23회 학술대회
• /
• pp.7-16
• /
• 1996

Rapid increase of refrigeration & air-conditioning system( r & a system ) in modern industries brings attention to the urgency of development as a core technology in the area. And it required to the compatibility problem of r & a system to alternative refrigerant for the protection of environment. Then, it is requested to research about the lubrication characteristics of refrigerant compressor which is the core thechnology in the r & a system. The study of lubrication characteristics in the critical sliding component is essential for the design of refrigerant compressor. Therefore, theoetical investigation of the lubrication characteristics of rotary compressor for r & a system is studied. And the Runge-Kutta method is used for the analysis of the behavior of rolling piston in the rotary compressor. The results show that the rotating speed of shaft and the discharge pressure have an important effect upon the angular velocity of the rolling piston. This results give important basic data for the further lubrication analysis and design of the rotary compressor.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.135-141
• /
• 2018

Rotary that causes traffic delays and safety issues by high-speed entry vehicles is currently being improved to roundabout. The operational difference between rotary and roundabout can cause driver's confusion and traffic accident. The purpose of this study is to develop the accident rate models which explain the factors related to the accidents by land use and intersection type. The main results are as follows. First, the null hypotheses that the type of land use and two intersections do not affect the accident rate are rejected. Second, the conflicting factors such as the number of crosswalk and bicycle lane should be carefully considered to reduce traffic accident at rotary. In the case of roundabout, greater than 3.5 m in circulatory lane width and two circulatory lane are analyzed to be important to prevent the accidents. Finally, the commercial and mixed areas are evaluated to be weak to traffic accidents than residential area.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.11-11
• /
• 2010

고도의 진공 환경을 요구하는 반도체 생산 라인에 적용되는 고진공 펌프는 주로 복합 분자펌프와 크라이오 펌프가 사용되고 있다. 이 중 크라이오 펌프는 극저온으로 냉각되는 냉각판에 기체 분자를 응축 또는 흡착시켜 기체를 제거하는 방식으로 복합 분자 펌프로 무게가 가볍고 증발 온도가 낮은 네온, 수소, 헬륨 기체 제거에 장점이 있다. 본 연구에서는 현재 상용화된 크라이오 펌프에 적용되는 GM 극저온 냉동기를 대체하기 위한 2단 GM형 맥동관 냉동기를 개발하여 기초 성능 시험을 수행하였다. 1단과 2단 모두 U-자형 형상으로 제작되었으며, 압력과 질량 유동 사이의 위상 조절을 위하여 오리피스 밸브와 이중 유입 밸브를 사용하였다. 개발된 맥동관 냉동기의 냉각 성능 목표는 1단(80 K)과 2단(20 K)에서 각각 45 W와 5 W이다. 기초 시험에서는 위상 조절용 밸브들의 개도와 작동 조건에 대한 냉각 특성과 부하 특성 시험을 수행하였다. 특히, 본 연구에서는 로터리 밸브 및 위상 조절 기구의 배치로 인해 고온부 형상이 복잡한 맥동관 냉동기를 크라이오 펌프로의 적용 편의성을 위하여 고온부 외형 구조를 단순화하였으며, 개발된 맥동관 냉동기와 기존에 크라이오 펌프에 적용되는 GM 극저온 냉동기를 비교, 고찰하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.255-256
• /
• 2009

자구형 오일 로터리 펌프의 정전시 오일 역류를 방지하기 위한 간단한 구조 장치로 역류 방지형 센터링 (anti suck back centering, ASBC)을 개발하고 배기 특성을 평가하기 위하여 소형 배기 시스템 (mini vacuum system)과 개인용 컴퓨터, AD converter (National instrument, NI-6009), 터치 패널 기반의 자동 제어 시스템을 제작하였다. 본 연구에서는 ASBC의 배기 특성을 확인하였고, 배기 특성을 해석하기 위하여 3차원 전산 유체 해석 프로그램인 CFD-ACE+를 사용하여 점성 유동 영역에서 유동장을 해석하였다. 그리고 평활도를 개선한 ASBC의 리크양을 측정 하였다.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.121-129
• /
• 2013

PURPOSES : This study deals with the traffic accidents of rotary in Korea. The objective of this study is to develop the accident models by age group based on the various data of rotaries. METHODS : In pursuing the above, this study gives particular attentions to classifying the accident data of 17 rotaries by age, collecting the data of geometric structure, traffic volume and others, and developing the models using SPSS 17.0 and EXCEL. RESULTS : First, 3 multiple linear regression models which were all statistically significant were developed. The value of model of under 30-49 age group were, however, evaluated to be 0.688 and be less than those of other models. Second, the most powerful variables were analyzed to be traffic volume in the model of under 30 age group, circulatory roadway width in the model of 30-49 age group, and the number of approach lane in the model of above 50 age group. Finally, the test results of accident models using RMSE were all evaluated to be fitted to the given data. CONCLUSIONS : This study propose install streetlights, speed humps and widen Circulatory as effective improvements for reduction of accident in rotary.

• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1033-1041
• /
• 2012

Power flow analysis(PFA) is introduced for solving the noise and vibration analysis of system structures in medium-to-high frequency ranges. The vibration analysis software, $PFADS_{C++}$ R4 based on power flow finite element method(PFFEM) and the noise prediction software, $NASPFA_{C++}$ R1 based on power flow boundary element method(PFBEM) are developed. In this paper, the coupled PFFE/PFBE method is used to investigate the vibration and radiated noise of the rotary compressor. PFFEM is employed to analyze the vibrational responses of the rotary compressor, and PFBEM is applied to analyze the radiation noise around rotary compressor. The vibrational energy of the structure is used as an acoustic intensity boundary condition of PFBEM. Numerical simulations are presented for the rotary compressor, and reliable results have been obtained.

• Journal of Biosystems Engineering
• /
• 제28권1호
• /
• pp.27-34
• /
• 2003

Present combustion engines have reached almost at the limit of development due to the fundamental structural problems. This study was carried out to propose a new concept internal combustion engine which has great potential advantages to the conventional engines. Proposed new concept engine is a kind of rotary engine. A rotor is rotating concentrically in a cylinder which is divided into two partitioning valves. and it makes four compartments in the cylinder. The volumes of each of four compartments are changing continuously with the rotor movement, and performs the functions of intake, compression. expansion and exhaust simultaneously. The results of this study can be summarized as follows. 1. Expected theoretical thermal efficiency is 44.9 percent at the condition of 1000rpm and compression ratio of 8.0. which is almost the same as that of the conventional engines. i.e., piston and Wankel rotary engine. 2. The new concept engine has 2. working strokes in every revolution. Therefore. the new concept engine can reduce the specific weight and volume than four-stroke piston engine. 3. The torque variation is very small. therefore minimal noise and vibration are expectable. 4. The new concept engine can reduce mechanical energy loss than piston engine because neither crank mechanism nor eccentrical motion exists.

• Journal of Biosystems Engineering
• /
• 제28권4호
• /
• pp.295-304
• /
• 2003

In this study, a rotary equipped with devices for preventing alien substance from being wound and for preventing soil adherence were developed and their performances are evaluated in the field. The former device was effective in the paddy field with low moisture content, but power requirement of rotary tilling was increased in the field with high moisture content. In the field test of rotaries equipped with device to prevent the power requirements were measured to be 52.18, 52.44, 49.01 and 46.34 PS for general, stainless steel, rubber and PE rotaries, and the quantities of the soil adhered to rotaries, on the average, were to be 5.6, 5.7, 3.1 and 2.7 kg for general, stainless steel, rubber and PE rotaries, respectively. The PE rotary cover reduced the power requirement and soil adherence by 11 and 52%, respectively.

• Journal of Biosystems Engineering
• /
• 제16권3호
• /
• pp.211-218
• /
• 1991

In this study, the break of the rotary blade which is occured from a stress concentration of the inside of blade by the outside impulsive load, is analyzed to 3-dimension used by the Freezing Photoelastic Method. These results are as follows. 1. The bending and compression stress are the greatest at the location of blade case. 2. The section area of 3cm-location from the blade case is the smallest, therefore, there are breaked 58% of all at this location and are proofed to the most danger section 3. The section area which by stress concentration of 3cm-location from blade case is caused by the production of blade, and it was higher danger of break than another location's. 4. In the location of 6cm and 9cm from the blade case, the bending stress has received a little and the section area has larger than another's, so it is not almost possible that the break at that location 5. In order to prevent of break, the external part which has contacted soil have to made tender for receiving a little stress and the internal part which received a large stress have to strengthen.