• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.414-419
• /
• 2016

A study of a precision test according to the control method of an injection molding machine was carried out. The effects of the screw stroke, holding pressure, melt temperature on both the hydraulic and electric injection molding machine were examined. In addition, hypothesis testing was performed to determine the deviation of the data obtained in the experiments. The conclusions obtained in this study were as follows. Significant deviations in the screw stroke, melt temperature and holding pressure occurred in that order. The hydraulic type showed significantly more variation between the products compared to the electric type. In addition, using a mini tab from the statistics program, a hypothesis was proposed and the P value of the injection stroke, holding pressure, melting temperature injection stroke and melting temperature had adopted a null hypothesis ($H_0$). The holding pressure, which showed mutual differences, adopted an alternative hypothesis ($H_1$).

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.920-921
• /
• 2011

본 연구는 비선형을 고려한 Linear Compressor의 스토로크의 동특성 해석 방법을 제안하고, 시작기에 대해서 특성실험 결과와 비교, 검토하였다. 비선형 특성으로 가스힘을 스트로크 및 전류에 대한 함수인 스프링 과 댐퍼로, 인덕턴스와 모터상수를 스트로크 및 전류에 대한 쇄교자속의 함수로 수식적 모델링 하였다. 이 관계식을 통해 동작특성을 해석하였다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.25-31
• /
• 2008

It is important for users to be confirming in e-Leaning system, because legitimate learner should be joined to the system for teaming and testing Thus, most system for authentication was verified using id and password with learner's id and password. In this case, It can be easy for hackers to steal learner's id and password. In addition, soma learner gets another to sit for the examination for one with another person id and password. For the solution like this problem it needs a biometrics authentication for complement. This method is required so much extra cost as well as are an unwanted concern. Therefore, we proposed keystroke technique to decide which learners are righteous or unlawful in this paper. In addition, we applied statistics and neural network for the performance of keystroke system. As a result, the performance of FAR and FRR in keystroke authentication was increased by proposed method.

• Journal of Korean Philosophical Society
• /
• v.119
• /
• pp.141-172
• /
• 2011

This thesis, centered on J. Locke and W. v. Humboldt's concept of language, is written for the purpose of illuminating their view of language and investigating the relationship between a matter of language and that of thought. First, Locke considers language was to be the great instrument and common tie of society. And language consists of words, and words are signs of ideas. Locke's discussion in language is shaped by his belief that these conditions of the transference of knowledge were in his time commonly unsatisfied, especially in two domains. First, there was no agreed classification of 'substance' based on careful observation and experiment. Second, the ideas associated with the names of mixed modes often varied both in the usage of different people and in that of the same person at different times. But Humboldt deals with 'the diversity of the structure of human language' and deals with it in respect of 'its influence on the spiritual development of mankind.' According to his theory, a language is not work(ergon) but an activity(energeia). Its true definition may therefore only be genetic. It is after all the continual intellectual effort to make the articulated sound capable of expressing thought. In short, he conceives of language as a particular 'intellectual effort'.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.782_783
• /
• 2009

영구자석형 조작기 PMA(Permanent Magnetic Actuator)는 간단한 구조와 높은 내구성으로 기존의 기계식 조작기가 지니고 있는 문제점을 해결했지만 긴 스트로크를 요구하는 고압용 차단기에는 적용이 어려운 단점이 있다. 이러한 단점을 보완한 전자석 조작기인 EMFA(Electromagnetic Force driving Actuator)는 PMA에 비해 상대적으로 긴 스트로크를 구현할 수 있으나 아직까지는 설계에 대한 연구가 정립이 되어 있지 않고 있다. 본 논문에서는 EMFA의 각 설계 변수를 변화시켜 동특성을 해석 및 비교하였고, 이러한 해석 결과를 바탕으로 EMFA의 동특성에 큰 영향을 주는 설계 변수를 선정하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.3
• /
• pp.43-53
• /
• 2022

In this study, analysis of the flow characteristics of pintle-controlled nozzle with split-line TVC system and the thrust performance prediction was performed. The numerical computation was verified by comparing the thrust coefficient derived from the analysis results with the experimental data. By applying the same numerical analysis technique, the flow characteristics of nozzle were confirmed according to operating altitude, pintle stroke position and TVC angle with the 1/10 scale. As the TVC angle increased, thrust loss occurred and the tendency of AF was different depending on the position of the pintle stroke. Based on the analysis results, the relation of thrust coefficient was derived by applying the response surface methods. The thrust performance model with a slight difference of 1.2% on average from the analysis result was generated.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.2 s.54
• /
• pp.47-56
• /
• 2007

In this study, tile performance of a passive tuned mass damper (TMD) and a semi-active tuned mass damper (STMD) was evaluated in terms of seismic response control of elastic and inelastic structures under seismic loads. First, elastic displacement spectra were obtained for the damped structures with a passive TMD, which was optimally designed using the frequency and damping ratio presented by previous study, and with a STMD proposed in this study. The displacement spectra confirm that STMD provides much better control performance than passive md with less stroke. Also, the robustness or the TMD was evaluated by off-tuning the frequency of the TMD to that of the structure. Finally, numerical analyses were conducted for an inelastic structure of which hysteresis was described by Bouc-Wen model and the results indicated that the performance of the passive TMD of which design parameters were optimized for a elastic structure considerably deteriorated when the hysteretic portion or the structural responses increased, while the STMD showed about 15-40% more response reduction than the TMD.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.918-923
• /
• 2007

Recently, the interest for renewable energy producing system is increasing rapidly. Among these, the wind turbine is most highlighted. It is installed at severe environment and generated electricity for a long time to exceed twenty years. Components of wind turbine are required high reliability. Therefore, structural strength analysis for wind turbine is needed for an accurate FE model. This paper is to provide reliable fine element modeling method of yaw bearing for wind turbine.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.6 no.4
• /
• pp.24-32
• /
• 2009

For a design of on/off solenoid actuator for valve actuating, designer must have the experimental knowledge as well as general electromagnetic formulas to design object. It is possible for theoretical knowledge to do the out-line design, but it is impossible to optimal design without experimental knowledge which only can be achieved through many repeated experiments. In addition, in present on/off type solenoid actuator field, the smaller, lightening, lower consumption power, high response time are effected as the most important design factor. So, experimental knowledge is more needed for optimal design of solenoid actuator. In this study, we derived the governing equations for optimal design of on/off solenoid actuator for valve actuating and developed a design program composed electromagnetic theories and experimental parameter values for inexperienced designers. And we proved the propriety of this program by experiments.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3056-3061
• /
• 2007

The technology of AC solenoid valves is now considered as a core technology in the fields of the production line of semi-conductor chips and the micro fluid chips for medical applications. And AC solenoid valves, which operate by compressed air, are characterized by high speed response, great repeatability and that the pressure on the cross sectional area of poppet is kept constant regardless of the fluctuation of the pressure exerted on the ports. In this study, AC solenoid valves that posses the high-speed responsibility and the high rate of flow have designed and analyzed through the law of equivalent magnetic circuit and Finite Element Method (FEM) respectively. In case of poppet, Flow field characteristic was analyzed by the variation of poppet and it was able to display flow field by changing the location of the poppet. Also, we verified possibility of the design through the static and dynamic pressure and the 3D distribution curve of the force by working the front poppet.