• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.140-152
• /
• 2003

Scenario is a guiding principle of launch operation and control for rocket and ground support system. Therefore, developing a scenario is the first step to prepare for rocket launch, which is a critical task for success of KSR-III flight test. The launch scenario for KSR-III flight test is a procedural sequence of command and control signals to be given to rocket and ground support systems. In this paper, the UML object modeling method is applied to development of a launch scenario. First, the subsystems of the launch system are modeled by objects, and then the interfaces between each two subsystems are modeled by association links. The finally obtained object diagram of KSR-III launch system is used to analyzing flow of data and commands and control signals, and interactions. The scenario includes the sequences of pre-launch/launch operations and emergency operations.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.322-330
• /
• 2020

This study investigates the far-field noise from three Falcon 9 vehicle launches from Vandenberg Air Force Base, CA, USA, as measured from the same location within the nearby community of Lompoc. The overall sound pressure levels for the three launches are shown to be similar, but some differences in the early launch period are thought to be weather-related. The peak directivity angle in overall level is approximately 65 deg, which is consistent with horizontally-fired, static rocket data. For the third launch, waveforms and spectra are analyzed for different events during the launch sequence. The measured spectral bandwidth decreases with time, but spectral levels remain above the ambient noise throughout the main-engine firing. Additionally, late-launch phenomena observed in the data appear to be correlated with main-engine cutoff and second-stage engine start.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.11
• /
• pp.803-811
• /
• 2019

Water rocket is a non-chemical rocket mechanically powered by pressurized gas and liquid (water) propellants. Since water rockets share many engineering commonalities with liquid propellant rockets for space launch vehicles, it is as a education tool for rocket engineering. Present paper investigated the availability of water rocket as an engineering education model by surveying the history of water rocket and making examples from K-12 education, commercial products and club activities. Finally, a way of improvement is suggested for water rocket competitions make changes in the perception on water rockets by examining the limitations of present competitions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.2
• /
• pp.98-107
• /
• 2002

An experimental and numerical study of aerodynamic charateristics of KSR-III and jet impingement on a deflector during launch has been conducted. To investigate aerodynamic characteristics of KSR-III configuration, wind tunnel tests using 6.4% scale model were performed by 4x4 feet ADD trisonic wind tunnel on the Mach number range of 0.4~3.8. Solutions of Three dimensional Euler equations were also obtained and compared with test result. For the study of KSR-III jet impingement flowfield on a deflector during launch operation, unsteady computation using CFD-FASTRAN was performed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.6
• /
• pp.50-58
• /
• 2014

This paper is about a short survey on the recent research activities regarding health monitoring and management for liquid rocket engines. For this, we investigate the precedent techniques developed in advanced space-industry countries which are USA, EU, Russia, Japan and China. Particularly, we focus on the technologies applied in China, a recently joined to the advanced space-industry countries in this field. Then we discuss some important points to be considered to apply to the development of the Korea Space Launch Vehicle KSLV-II and other related projects.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.211-215
• /
• 2006

It is a known fact that much effort, time and cost are needed to develop a new launch vehicle. Among the many components consisting of the launch vehicle, a rocket engine is a one of the most important and difficult part to develop in which many risks may lie dormant because very active chemical reaction occurs inside the engine while the engine is also required optimum ratio of the mass and performance. This research focused on the risk mitigation to develop the rocket engine using the example of recently developed US rocket engine.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.117-123
• /
• 2003

This paper introduces ground feeding facility for flight test of sounding rocket(KSR-III) which use liquid propellants and addresses facility configuration, development process and results. Supply of propellants and pressurization gases to vehicle according to predefined launch scenario is the primary goal of ground feeding facility. It was constructed at KSR-III launch site, verified by several tests and used for the flight test successfully.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.4
• /
• pp.277-285
• /
• 2022

There has been significant increase in demand of launch opportunities from the small satellite sector that represents the new space era. Providing smallsat-dedicated launch service at an affordable price is a new business model many startup companies have pursued, which requires innovative solutions for cost reduction in combination of low cost components, volume production and optimized manufacturing. We set out a preceding study at KARI to develop a suite of critical and cost-cutting technologies in preparation for a two-staged small launch vehicle development, based on the liquid rocket engine technologies developed from the Nuri program in accordance with the 3^rd master plan for national space development. In this work, we introduce the concept of a two-staged small launch vehicle that aims to be innovative and cost competitive for small satellites, and describe mission design results including staging as well as overall vehicle configuration of the launch vehicle.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.89-89
• /
• 2003

로켓엔진의 연소에 필요한 추진제를 안정적으로 공급하기 위한 추진제 공급시스템의 주요 구성과 설계 주요 인자를 정리하였다 공급시스템은 추진제 주입/배출 장치, 추진제탱크 가압 및 배기 장치, 추진제 공급 주/분기 배관, 극저온 산화제 온도 유지 장치 등으로 구성되어 있다. 주요 설계 제한 조건으로는 터보 펌프 입구에서의 추진제 압력 및 온도, 필요 추진제 공급 유량 및 온도 그리고 추진제 충진 및 비상 배출 허용 시간 등이며 이는 각 로켓의 해당 임무에 따라 적절히 결정된다. 발사체로부터 할당된 중량값 이내에서 고신뢰도의 작동성, 안정성이 보장되는 시스템을 설계하여야 하며 초기 설계 단계에서 개발 및 수급 가능성을 동시에 고려하여야 할 것이다. 또한 고추력 생성을 위해 엔진 클러스터링이 수행되어야 할 경우 각 엔진으로의 균등한 추진제 배분 공급이 설계의 중요한 요구 조건이 된다. 이러한 공급시스템의 개념은 액체산소와 케로신 조합의 액체 로켓인 100kg급 소형 위성 발사체(KSLV-Ⅰ)에 적용될 예정이다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.6-6
• /
• 1999

국가우주개발의 중장기 계획에 따른 우주 발사체 개발의 일환으로, 한반도 대기상태측정 등을 위한 고성능 과학관측로켓의 국산화를 위하여 항공우주연구소를 중심으로 여러 기관에서 연구가 진행되고 있다. 액체로켓을 주 추진체으로 삼고 있기 때문에 로켓의 안정적인 연소와 성능 향상이야말로 발사체 개발에 핵심이라고 할 수 있다. 액체로켓의 경우, 초기점화는 고체시동장치 또는 액체시동장치에 의한 방법 등으로 구분될 수 있다. 본 연구는 액체시동장치 중 hypergolic으로 초기점화를 하고 뒤이어 주추진제(LOX/kerosene)를 내보내어 주연소를 할 수 있는 Unlike impinging Quadlet injector(3 on 1)의 연소성능 이해와 예측을 위해 Cold flow test를 기초로 수행되었다.