• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.337-338
• /
• 2008

2008년 현재 우리나라는 10%의 인구가 60세 이상인 이른바 고령사회에 접어들었다. 노인 인구의 증가로 인해 노인이 여가생활 또는 일반생활을 보조하기 위한 보행 보조기에 대한 관심이 증가되고 있다. 대부분 동력이 없는 보행보조기를 사용하고 있으며 이러한 기구는 경사로 공간 또는 힘이 약한 노인들에게 취약성을 가지고 있다. 이에 동력형 보행보조로봇에 관심이 증가하고 있다. 동력형 보행보조로봇 역시 경사로에 있어서 편리성과 안전성을 높이기 위한 연구가 필요한 실정이다. 이에 본 논문에서는 보행보조로봇이 경사로에 진입 하였을 경우 기울어진 경사로의 정도를 인식하여 모터를 제어 한다. TILT 센서를 이용하여 기울이짐 정도를 측정 하였고, 또한 로봇의 전류 실시간으로 체크하여 로봇의 안전성을 향상 하였다. 제어 시스템 구성은 사용자의 보행의지를 파악하기위해 FSR 센서를 부착하여 조향장치로 사용하였으며, 경사로를 인식하기 위해 Liquid 타입의 TILT 센서를 사용하였으며, 모션 제어를 위해 DSP를 사용하였다. 본 제어 시스템을 보조보행로봇에 적용하였을 때, 보행보조로봇이 오르막 경사로에 진입시 기존보다 힘을 적게 사용하여 경사로를 진행하였으며, 경사로에서 브레이크 작동속도가 향상 되었다. 또한 내리막 경사로에서는 모터의 힘을 적게 사용하고 중력의 힘을 사용하여 이를 통해 전류의 소비량을 개선 하였다.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.226-231
• /
• 2016

Researching and developing mobile robot are quite important. Autonomous driving of mobile robot is important in various working environment. For its autonomous driving, mobile robot detects obstacles and avoids them. Purpose of this thesis is to analyze kinematics model of the mobile robot and show the efficiency of type-2 fuzzy self-tuning PID controller used for controling steering angle. Type-2 fuzzy is more flexible in verbal expression than type-1 fuzzy because it has multiple values unlike previous one. To compare these two controllers, this paper conduct a simulation by using MATLAB Simulink. The result shows the capability of type-2 fuzzy self-tuning PID is effective.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.5
• /
• pp.468-472
• /
• 2013

This paper deals with the indoor localization problem for a SSMR (Skid Steering Mobile Robot) subjected to wheel-ground friction and with one LRF (Laser Range Finder). In order to compensate for some friction effect, a friction related coefficient is estimated by the recursive least square algorithm and appended to the maneuvering command. Also to reduce odometric information based localization errors, the lines are extracted with scan points of LRF and matched with the ones of the corresponding map built in advance. The present friction compensation and scan map matching schemes have been applied to a laboratory SSMR, and experimental results are given to validate the localization performance along an indoor corridor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.353-360
• /
• 2016

In this paper, a DOB (disturbance observer) is designed for the steering stabilization of one-wheeled balancing robot. Based on the simple stick model of the single-wheeled robot, DOBs and the corresponding Q filters are designed. Although the proposed models are simple, DOBs are desired to deal with model uncertainties for the enhanced balancing performance. Experimental studies of two different cases of Q filter design are conducted to evaluate the performances of DOBs. Their performances are compared through balancing control experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.787-792
• /
• 1991

This paper proposes a steering control algorithm for non-holonomic mobile robots. The steering control algorithm is essential to navigate autonomous vehicles which employ comination of the dead reckoning and absolute sensor system such as a machine vison for detecting landmarks in order to estimate the current location of the mobile robot. The proposed algorithm is based on the minimum time BANG-BANG controller and curvature-continuity curve design method. In the BANG-BANG control scheme we introduce velocity/acceleration limiter to avoid any slippage of driving wheels. The proposed scheme is robot-independent and hence can be applied to various kinds of mobile robot or vehicles. To show the effectness of the proposed control algorithm, a series of computer simulations were conducted for two-wheel driven mobile robot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.79-85
• /
• 2007

The skid-steering method that applied a number of mobile robot currently is very effective in narrow area. But it contains several problems of its natural properties, slip, occurred by different direction between vehicle's driving and wheel's rotary. From this thesis we want to suggest suitable structure of $6{\times}6$ skid steering wheeled vehicle and method of driving by analyzing the behavior of $6{\times}6$ skid-steered wheeled vehicle by engineering analytical method

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1235-1240
• /
• 2006

Previous isotropy analysis of a caster wheeled omnidirectional mobile robot(COMR) has been made under the assumption that the steering link offset is equal to the caster wheel radius. Nevertheless, many practical COMR's in use take advantage of the steering link offset different from the wheel radius, mainly because of improved stability. This paper presents the isotropy analysis of a fully actuated COMR with variable steering link offset, which can be considered as the generalization of the previous analysis. First, the kinematic model of a COMR under full actuation is obtained based on the orthogonal decomposition of the wheel velocities. Second, the necessary and sufficient conditions for the isotropy of a COMR are derived and examined to categorize three different groups, each of which can be dealt with in a similar way. Third, for each group, the isotropy conditions are further explored so as to identify all possible isotropic configurations completely.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.306-306
• /
• 2000

This paper analyze the dynamic characteristics of Automated Guided Vehicle(AGV) which is being developed as a part of automation in port through DADS, one of the multi-dynamic analysis program, Previous evaluation of a vehicle is carried out through the continuous driving test of a real vehicle, however this method raise the loss of finance and time. If it is possible to analyze the dynamic characteristics of vehicle before construction completely we can compensate the loss of money and time during constructing. AGV contained containers is very heavy and its center of gravity can be easily changed with the disturbance from road or cornering. It makes AGV unsatisfied, therefore we evaluate the handling characteristics and stability of the full vehicle model. This paper contribute to establish the foundation of the development of a new system like a AGV which have a special structure.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.6
• /
• pp.775-780
• /
• 2008

In this paper, unmanned driving of robotic vehicle using magnetic marker is proposed. One of the most important component of autonomous vehicle is to detect the position of a magnetic marker on the road. In order to calculate the precise position of a magnet embedded on the road, the relation of magnetic field and a sensor is analyzed, and a new position sensing system using arrayed magnetic sensor is proposed. Also, the steering control system using a stepping motor is developed for driving by automatic mode as well as manual mode. For the verification of usability, the developed robotic vehicle is tested on magnetic road.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.5
• /
• pp.22-27
• /
• 2022

An integrated front steering system and front brake system (FSFB) is developed to improve the stability and controllability of an SUV. The FSFB simultaneously controls the additional steering angle and front brake pressure. An active front steering system (AFS) and an active front brake system (AFB) are designed for comparison. The results show that the FSFB enhances the lateral stability and controllability regardless of road and running conditions compared to the AFS and AFB. As a result, the yaw rate of the SUV tracks the reference yaw rate, and the side slip angle decreases. In addition, brake pressure control is more effective than steering angle control in improving the stability and steerability of the SUV on a slippery road. However, this deteriorates comfort on dry or wet asphalt.