• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 추계학술대회 학술발표 논문집 제14권 제2호
• /
• pp.98-101
• /
• 2004

본 논문에서는 XYS영상 정규화와 XSR 영상 정규화에 기반을 둔 영상사형정보예측 방법을 제안한다. 실험을 통하여 XYS영상 정규화와 XRS 영상 정규화에 기반을 둔 영상사형정보예측 방법을 보이고 XYS 방식의 의한 사형정보예측방법이 더 우수함을 보인다. 또한 플리핑 및 회전과 수평 수직 비 정보를 원래영상과 감지된 영상의 중앙모멘트로 표시될 수 있음을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2200-2202
• /
• 1998

Autonomous mobile robot provide many functions such as sensing, processing, and driving. For more intelligent jobs, more intelligent functions are to be added and the existing functions may be updated. To execute a job autonomous mobile robot has a information of surrounding environment. So, robot uses sonar sensor, vision sensor and so on. Obtained sensor information is used map generation. This paper is focused on map generation using stereo vision system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3083-3085
• /
• 1999

This paper presents an algorithm that the mobile robot track accurately a moving object with information from a CCD camera mounted on mobile robot. Singular Value Decomposition is adapted to remove the measurement noise of a Raw data of CCD. The mobile robot estimate the trajectory using Kalman filter and track the path of a moving object with a servo motor. Computer simulation results are showed that the efficient tracking system for the mobile robot is designed properly.

• 전자공학회논문지SC
• /
• 제41권1호
• /
• pp.9-16
• /
• 2004

본 논문에서는 특징점 기반 시각 구동 제어 시스템을 이용하여 파라미터 불확실성을 가지는 로봇 매니플레이터에 대한 강인 제어기를 제안한다. 시스템 내부 서부 루틴인 동력학 제어부에 적분 작용을 포함시켜 파라미터 변동에 의한 로봇 매니플레이터의 정상 상태 오차를 개선하기 위하여 시스템 내부 서부 루틴인 동력학 제어부에 적분 작용을 포함되도록 하였다. 이적분 작용은 이미지 평면상의 특징점 추정 오차도 개선시킨다. 폐루프 시스템의 안정도는 Lyapunov 기법에 의하여 해석한다. 5링크 2 자유도의 로봇에 적용한 컴퓨터 시뮬레이션 및 실험을 통하여 제안된 제어기법의 실용성을 보인다. .

• 대한기계학회논문집A
• /
• 제39권4호
• /
• pp.361-367
• /
• 2015

논문에서는 인간과의 안전한 접촉이 가능한 내부형 연속체로봇에 대한 설계개념과 로봇 말단장치의 운동특성실험을 제시한다. 인간의 근육과 유사한 상극구동방식으로 작동하는 공압인공근육을 연속체로봇의 백본 및 구동장치로 사용하기 때문에, 외부환경과의 부드러운 접촉과 강한 접촉을 선택적으로 제어할 수 있는 로봇 관절에서의 가변강성이 가능하다. 그러나 내부형 연속체로봇은 백본소재의 굽힘운동을 예측하기 어렵기 때문에 로봇 말단장치에서의 자세를 추정하기 어렵다. 이를 해결하기 위해 3 축 가속도계와 3 축 자이로스코프를 이용한 칼만필터 방법을 제안하고 개발된 내부형 연속체 로봇의 자세추정에 적용하여 실제 실험을 통해서 제안된 방법의 효율성을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1367-1370
• /
• 1997

This paper presents a vision algorithm for finding the centers of steam generator tubes using the generalized symmetry transform, which is used for ECT(Eddy Current Test) of steam generator tubes in nuclear power plants. The geometrical properties of the image representing steam generator tubes shows that they have amost circular or somewhat elliptic appearances and each tube has strong symmetry about its center. So we apply the generalized symmetry transform to finding centers of steam geneator tubes. But applying the generalized symmetry transform itself without any modification gives difficulties in obtaining the exact centers of steam generator tubes. But applying the generalized symmetry transform itself without any modification gives difficulties in obtaining the exact centers of tubes due to the shadow effect generated by the local light installed inside steam generator. Therefore we make the generalized symmetry transform modified, which uses a modified phase weight function in getting the symmetry magnitude in order to overcome the misleading effect by the local light. The experimental results indicate that the proposed vision algorithm efficiently recongnizes centers of steam generator tubes.

• 제어로봇시스템학회논문지
• /
• 제9권10호
• /
• pp.822-831
• /
• 2003

A computer-vision based pipe-inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and the radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplace operator with input image, which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation is introduced for line detection. The dimension of inner and outer radius of pipe is calculated by the proposed line-scanning method. The method scans several lines along the X and Y axes, calculating the eccentricity of inner and outer circle, by which pipes with wrong end-shape can be classified and removed.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2191-2204
• /
• 1993

A sensor system has been developed to measure the posture(position and orientation) of mobile robots working in industrial environments. The proposed sensor system consists of a CCD camera, retro-reflective landmarks, a strobe unit and an image processing board. The proposed hardware system can be built in economic price compared to commercial vision systems. The system has the capability of measuring the posture of mobile robots within 60 msec when a 386 personal computer is used as the host computer. The experimental results demonstrated a remarkable performance of the proposed sensor system in the posture measurement of mobile robots - the average error in position is less than 3 mm and the average error in orientation is less than 1.5.

• 대한기계학회논문집A
• /
• 제33권6호
• /
• pp.614-619
• /
• 2009

An engine for marine propulsion and power generation consists of several cylinder liner-piston sets. And the oil groove is on the cylinder liner inside wall for the lubrication between a piston and cylinder. The machining process of oil groove has been carried by manual work so far, because of the diversity of the shape. Recently, we developed an automatic grinding robot system for oil groove machining of engine cylinder liners. It can covers various types of oil grooves and adjust its position by itself. The grinding robot system consists of a robot, a machining tool head, sensors and a control system. The robot automatically recognizes the cylinder liner's inside configuration by using a laser displacement sensor and a vision sensor after the cylinder liner is placed on a set-up equipment.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.112-119
• /
• 2002

Generally, it is very difficult to inspect geometric shape of large 2D objects after machining. To maintain the accuracy for inspection, a robot vision is used to divide overall shape into several enlarged images, and image processing technique is applied to acquire one minute geometric contour. The inspection is to compare the NC data with the measured contour data by the vision system, and the algorithm is to rotate to minimize the maximum deviation after coinciding two geometric centers. This paper experimentally shows that the proposed algorithm is very useful for inspection of large machined objects.