• Korean Journal of Optics and Photonics
• /
• v.22 no.6
• /
• pp.247-255
• /
• 2011

The optical performance of LLF(Lenticular Lens Film)-based backlight was studied by using optical simulation as functions of the aspect ratio and the refractive index of lenticular lenses. In order to perform reliable simulation, the BSDF(bi-directional scattering distribution function) of the scattering dots on the bottom surface of the light guide plate was obtained as a superposition of the Lambertian and the elliptic Gaussian distribution components by comparing the experimental results and the simulation for the luminance distribution on the light guide. Based on this approach, an appropriate BSDF of the scattering dots of the light guide was constructed. The resultant values of the optimized aspect ratio and the refractive were found to be 1.25 and 1.65, respectively. In spite of the hybrid aspects of LLF incorporating both diffusing and collimating functions, the optical performance, in particular the on-axis luminance of LLF-based backlight was inferior by about 20% compared to that of conventional backlights adopting one prism film. However, the combination of two lenticular lens films resulted in comparable luminance gain as well as smooth decrease in the luminance with the viewing angle without exhibiting any side lobes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.11a
• /
• pp.249-254
• /
• 2004

광의 효율적 사용을 위해 표면에 마이크로 그루브가 새겨진 고성능 광학 부품의 개발이 활발하고, 이들 부품의 다량 생산을 위한 초정밀 금형제조기술이 각광을 받고 있다. 최근의 초정밀 미세 기계가공의 경우 간단한 공정으로 이러한 마이크로 그루브 금형을 제작할 수 있다. 특히 조명각 변조용 렌티큘러 렌즈와 같이 실린더형 그루브 금형의 경우에는 기존의 Lithography, MEMS, LIGA 등 광 에너지를 이용한 다른 제조방법들에서는 가공하기 어려운 점이 있으나, 기계가공에서는 쉽게 제작가능한 장점이 있다. 본 연구에서는 이러한 미세기계가공기술의 장점을 활용하여 U 형 마이크로 그루브를 가진 Lenticular 렌즈용 금형을 가공하고자 하였다. 가공에는 3 축 구동의 초정밀 미세 복합가공기와 단결정 천연 다이아몬드공구가 사용되었고, 가공방식은 마이크로 세이핑 공정을 적용하였으며, 가공 금형 재료에는 Brass와 무전해 Nickel이 사용되었다. 실험을 통하여 금형가공시의 절삭력, 칩 형상, 가공표면 등의 분석이 수행되었으며 이를 기반으로 여러 가지 가공문제점을 해결하고, 최종적으로 양호한 렌티큘러렌즈용 금형을 가공하였다.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.201-208
• /
• 2005

In order to realize a 3-D stereoscopic display module with alternating illumination angles, several conditions required for a lenticular lens sheet were established, and then both the lens specification and the module structure were designed. Also the performance of the stereoscopic module and its tolerance characteristics were evaluated by simulating the intensity distribution on the observation plane with a finite-ray tracing technique. From the evaluation, it was known that an intersection area between two adjacent lenses should not be filled and that the lateral mismatch between a planar liquid crystal shutter and a lens sheet should be minimized.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.71-74
• /
• 1995

Diamond shaping is one of the machining strategies to make the optical micro-groove molds,and it is especially useful when rhe component is an assembly of the linear micro-groove array. A mirror-like surface and arbitrary crose-sectional curve can be easily made by diamond. Howerver, the cutting speed of shaping is relatively lower than that of the other cutting methods, and there exist an unstable cutting conditions that generate the chatter. This study is focused on the modeling of the simplified self-induced chatter of the diamond shapping. Form the chatter model and experiments, it is found that the unstable cutting conditions exist wwhen the depth of cut is low and cutting speed is high.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.141-149
• /
• 1998

Diamond shaping is one of the machining strategies to make the optical micro-groove molds, and it is especially useful when the component is an assembly of the linear micro-groove array. A mirrorlike surface and an arbitrary crose-sectional curve can be easily made by the diamond tool. However, the cutting speed of shaping is relatively lower than that of the other cutting methods, and there exist an unstable cutting conditions that generate the chatter. This study is focused on the modeling of the simplified self-induced chatter of the diamond shaping, and the machinabilities of three materials are compared by cutting experiments. From the chatter model and experiments, it is found that the unstable cutting conditions exist when the depth of cut is low and cutting speed is high. It is also found that the brass is relatively good material in micro shaping than copper or aluminium from the cutting experiments.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.61-68
• /
• 2010

Optical simulation methods were applied to the edge-lit LED backlight for LCD TV applications in order to optimize the optical structure of the light guide plate(LGP), and thus to improve the uniformity properties by removing the bright spots caused by LED's. The edge-lit LED backlight consisted of three white LED's with a lamp cover, a light guide plate, and a reflection film. When there was no pattern on the entrance side surface of the LGP, the illuminance uniformity was sensitively dependent on the distance d between the LED and the entrance surface. The illuminance uniformity increased with d but its increasing rate slowed down when d was beyond ~ 1.5 mm. When micro-patterns such as a lenticular lens array (LLA) or a serration pattern were formed on the entrance surface, the illuminance uniformity was improved substantially even for the case of very small d. At the same simulation condition, the lightguide with serration pattern showed a better uniformity than that with LLA pattern. Additional improvement could be achieved by changing the refractive index of the micro-patterns. These results suggest that using micro-patterns is a very effective way to reduce the bright spots due to their refracting function for the concentrated incident rays onto the LGP.