• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.69-71
• /
• 2001

본 논문에서는 FACS(fluorescence activated cell sorting)의 초소형화를 위한 미세 유체소자들을 플라스틱 기판에 집적하여 제작하고 전기삼투를 이용해서 세포가 일렬로 이송되는 특성을 시험한다. 제작된 미세 유체 소자는 유리 하부 기판과 플라스틱 상부 기판 및 전원장치로 구성된다. 상부기판은 세포를 주입하기 위한 샘플 측 레저버와 세포를 운반 및 일렬 이송이 가능하게 하는 버퍼를 저장할 두 개의 레저버가 있고 이들이 배출되는 레저버로 구성된다. 마이크로머시닝 기술을 이용하여 실리콘 기판 위에 미세 채널 몰드를 제작한 후 PDMS(polydimethylsiloxane)로 주물을 제작한다. $O_2$ 플라즈마를 이용하여 유리 기판과 PDMS 주물을 접합하며 제작된 채널에 적색 잉크와 bead를 샘플 측에 충전하고 버퍼 측에 sodium borate를 충전한 후 전기삼투로 구동시킨다. bead가 일렬로 이송되도록 전장을 조절하고 이때의 유속과 유량을 측정한다. 다양한 전장에 따른 실험을 통하여 채널의 구조를 최적화한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.146-154
• /
• 1997

Solenoid-folw control type ABS is used with a 'dump and reapply' pressure control arrangement instead of using 2/2 (normal open/close) solenoid valves in convensional systems(sol. -sol. control type), a flow control valve is used which replaces the (no) inlet valve. The flow control valve controls fluid flow providing a nearly constant reapply rate( .theta. ) after the dump plase of ABS operation. In this study, to investigate a characteristics of brake pressure by PWM control, test rig was consisted of ABS hydraulic modulator, digital controller, pneumatic power supply and brake master cylinder. For comparison with experi- mental results, system modelling and computer simulation were performed. As a result, experiment results showed fairly agreement with the simulation. Also, it is shown that the pressure gradient (tan .theta. ) is affected by pressure, frequency, duty ratio and expressed with an exponential funtion.

• 기계와재료
• /
• v.22 no.3
• /
• pp.110-119
• /
• 2010

인공아가미기술은 수중에서 용존산소를 분리하여 호흡에 사용하는 것을 말한다. 이를 위해 아가미의 특성을 분석하고 현재까지 제시되고 있는 용존산소의 분리를 위한 메커니즘 특성을 기술하였다. 즉 압력 강하, 캐리어 용액, plastron의 관점에서 용존산소를 분리하여 수중 호흡에 사용하는 부분에 대해 소개하였다. 또한, 현재 진행 중인 용존산소 분리실험장치를 이용한 수중 용존산소의 감소특성을 제시하였다. 압력을 감소함에 따라 용존산소량이 비례하여 감소함을 알 수 있었다. 중공사막에 공급되는 유량을 증가시키면 용존산소량의 감소가 둔화되는 특성을 나타낸다. 휴대형 인공아가미기술은 물놀이와 관련된 레저활동의 안전도구로 활용이 가능하고, 스쿠버다이버, 마이크로연료전지, 인공부레, 잠수함 그리고 인공 폐 분야에 사용이 기대된다.

• Electronics and Telecommunications Trends
• /
• v.36 no.3
• /
• pp.106-118
• /
• 2021

The field of brain science (or neuroscience in a broader sense) has inspired researchers in artificial intelligence (AI) for a long time. The outcomes of neuroscience such as Hebb's rule had profound effects on the early AI models, and the models have developed to become the current state-of-the-art artificial neural networks. However, the recent progress in AI led by deep learning architectures is mainly due to elaborate mathematical methods and the rapid growth of computing power rather than neuroscientific inspiration. Meanwhile, major limitations such as opacity, lack of common sense, narrowness, and brittleness have not been thoroughly resolved. To address those problems, many AI researchers turn their attention to neuroscience to get insights and inspirations again. Biologically plausible neural networks, spiking neural networks, and connectome-based networks exemplify such neuroscience-inspired approaches. In addition, the more recent field of brain network analysis is unveiling complex brain mechanisms by handling the brain as dynamic graph models. We argue that the progress toward the human-level AI, which is the goal of AI, can be accelerated by leveraging the novel findings of the human brain network.

• Journal of Navigation and Port Research
• /
• v.32 no.1
• /
• pp.109-114
• /
• 2008

This study is about the status and comparison of recreational scuba diving certification system in Southeast Asia countries. For the collection of the information, the contents of the numerous corresponding Internet sites were utilized, related documents were surveyed. And to supplement the information extensive interviews were held with the representatives of tourism department of many countries as well as staffs of diving associations, resort operators and diving instructors during various 2007 Dive Expos held in Southeast countries. In this paper, the relation between scuba certification and international standards were introduced for better understanding of the certification system. The research result shows that the scuba diving industry plays an important role in their country's tourism and the certification market of the Southeast Asia has grown to be greater than 30% of the world total market. However due to the facts that the scuba activity is originated from the western world and the controlling headquarters of the most certification agency are also located there, Southeast countries cannot take any leading roles in the scuba diving policies and systematic issues. Accordingly any modifications or improvements are expected to be very difficult. Also while Europeans and Americans have launched the programs and organizations for the quality assurance by cooperating with the international standards, but no such activity has yet appeared on the surface in Southeast Asia. According to the investigation the necessity will become bigger in near future.

• Elastomers and Composites
• /
• v.41 no.4
• /
• pp.223-230
• /
• 2006

Rubber compounds have a high viscoelastic property. One of the viscoelastic behaviors during profile extrusion is the swelling of extrudate, and the amount of swelling varies with operational conditions in extrusion. It is well recognized that the elastic portion in the viscoelastic property plays an important role in the extrudate swell. In this study computer simulation of the die swell at the capillary die for several rubber compounds has been performed using commercial CFD code, Polyflow. A non-linear differential viscoelastic model, Phan-Thien-Tanner (PTT) model, was used in the computer simulation. Non-isothermal behavior was considered in the calculation. Distribution of pressure, velocity and temperature in the reservoir and capillary die, and extrudate profiles were predicted through the simulation. The amount of the die swell fur the different rubber compounds was investigated for various flow rates and three types of length to diameter of the capillary die. It is concluded that the PTT model successfully represented viscoelastic behavior of rubber compounds.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.1
• /
• pp.39-45
• /
• 2016

Thermal management of a fuel cell is important to satisfy the requirements of durability and efficiency under varying load conditions. In this study, a linear state feedback controller was designed to maintain the temperature within operating conditions. Due to the nonlinearity of automotive fuel cell system, the state feedback controller results in marginal stable under load condition from $0.5A/cm^2$ to $0.7A/cm^2$. A PWM (Pulse Width Modulation) and the modified state feedback controller are applied to control the temperature under the load condition from $0.5A/cm^2$ to $0.7A/cm^2$. The cooling system model is composed of a reservoir, radiator, bypass valve, fan, and a water pump. The performance of the control algorithm was evaluated in terms of the integral time weighted absolute error (ITAE). Additionally, MATLAB/SIMULINK$^{(R)}$ was used for the development of the system models and controllers. The modified state feedback controller was found to be more effective for controlling temperature than other algorithms when tested under low load conditions.