• Title/Summary/Keyword: 레인 센서

Search Result 249, Processing Time 0.03 seconds

Reliable Asynchronous Image Transfer Protocol In Wireless Multimedia Sensor Network (무선 멀티미디어 센서 네트워크에서의 신뢰성 있는 비동기적 이미지 전송 프로토콜)

  • Lee, Joa-Hyoung;Seon, Ju-Ho;Jung, In-Bum
    • The KIPS Transactions:PartC
    • /
    • v.15C no.4
    • /
    • pp.281-288
    • /
    • 2008
  • Recently, the advance of multimedia hardware has fostered the development of wireless multimedia sensor network which is able to ubiquitously obtain multimedia content such as image or audio from the environment. The multimedia data which has several characteristics such as large size and correlation between the data requires reliability in transmission. However, the existing solution which take the focus on the efficiency of network mainly, is not appropriate to transmit the multimedia data. In the paper, we proposes a reliable asynchronous image transfer protocol, RAIT. RAIT applies double sliding window method in node-to-node image tansfer to prevent the packet loss caused by network congestion. The double sliding window consists of one sliding window for the receiving queue, which is used for prevention of packet loss caused by communication failure between nodes and the other sliding window for the sending queue which prevents the packet loss caused by network congestion. the routing node prevents the packet loss and guarantees the fairness between the nodes by scheduling the packets based on the image non-preemptively. The RAIT implements the double sliding window method by cross layer design between RAIT layer, routing layer, and queue layer. The experiment shows that RAIT guarantees the reliability of image transmission compared with the existing protocol.

IoT Module Interface Implementation for Lake environment of Dry Internal Project Land Digging Reclamation Method (건식 내부 굴착 매립 간척공법의 호소 환경을 위한 IoT 모듈 인터페이스 구현)

  • Kim, myeong-soo;Lee, hong-ro
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2016.05a
    • /
    • pp.69-70
    • /
    • 2016
  • 내부건식기법(DIPLDRM)[4] 호소의 수질개선을 위한 신재생에너지 IoT 시스템 개발 과제를 수행을 위한 서비스 레이어 구축과정 중 실시간 센서 데이터 정보 시각화를 극대화 시키기 위한 센서 위치 값을 ArcGIS를 통해 보다 효과적으로 전달할 수 있는 시스템을 제안한다. 제안된 시스템은 실시간 그래프와 지도에서 센서의 위치 확인을 할수 있다는 점에서 사용자의 편의성을 증대시킬 수 있을 것으로 판단된다.

  • PDF

Design and fabrication of a comb-type differential pressure sensor with silicon beams embedded in a silicone rubber membrane (실리콘 빔이 실리콘 고무 멤브레인에 삽입된 빗살형 차압센서의 설계 및 제조)

  • Park, Jeong-Yong;Kong, Sung-Soo;Seo, Chang-Taeg;Shin, Jang-Kyoo;Koh, Kwang-Rak;Lee, Jong-Hyun
    • Journal of Sensor Science and Technology
    • /
    • v.9 no.6
    • /
    • pp.424-429
    • /
    • 2000
  • A novel differential pressure sensor has been developed with silicon beams embedded in a silicone rubber membrane. The transducer is usable for most applications involving exposure to harsh media. A piezoresistive differential pressure sensor using silicone rubber membrane has been fabricated on the selectively diffused (100)-oriented n/n+/n silicon substrates by a unique silicon micro-machining technique using porous silicon etching. The pressure sensitivity is about $0.66\;{\mu}V/mmHg$ and the non-linearity is less than 0.1%.

  • PDF

Fabrication on Microheater Flow Sensors Using Membrane Structure and Its Characteristics (맴브레인 구조를 이용한 미세발열체형 유량센서의 제작과 그 특성)

  • 정귀상;노상수
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.11 no.11
    • /
    • pp.996-1000
    • /
    • 1998
  • This paper describes the characteristics of Pt microheater using aluminum oxide films as medium layer and its application to flow sensors. Pt microheater have heating temperature of $390^{\circ}C$ at heating power of 1.2 W. Output voltages of flow sensors which were fabricated by integrating sensing-part with heating-part increase as gas flow rate and its conductivity increase. At $O_2$ flow rate of 2000 sccm, heating power of 0.8 W, output voltage of flow sensor is 101 mV under bridge-applied voltage of 5 V.

  • PDF

Design of BACnet/Zigbee Integrated System (BACnet/Zigbee 통합 시스템의 설계)

  • Park, D.K.;Kim, S.H.;Hong, S.H.
    • Proceedings of the KIEE Conference
    • /
    • 2007.10a
    • /
    • pp.203-204
    • /
    • 2007
  • BACnet (Building Automation and Control Networks) 은 빌딩 자동화와 컨트롤 시스템 전용의 표준 데이터 커뮤니케이션 시스템이다. BACnet은 현재 데이터링크 레이어의 전송 미디어로 5개의 유선 프로토콜을 제공하고 있다. 최근 건물 통신망에 무선 기술에 대한 수요 및 필요성이 높아지고 있다. Zigbee 는 IEEE 802.15.4를 기반으로 한 저 전력 무선 통신의 표준 프로토콜로써 유비쿼터스 센서 네트워크의 특징을 포함하고 있다. 본 연구에서는 BACnet의 데이터 링크 레이어의 확장된 무선 옵션으로 Zigbee를 포함하는 기술에 대해 연구하고 이를 기술한 실제 모델을 개발한다.

  • PDF

A Congestion Control Mechanism in Wireless Sensor Networks (무선 센서 네트워크에서 혼잡 제어 메커니즘)

  • Joo, Jeong-Ran;Lee, Sung-Keun
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.2 no.2
    • /
    • pp.75-82
    • /
    • 2007
  • Wireless Sensor Network(WSN) is composed of a large number of sensor nodes and accomplish a common task such as environment monitoring or asset tracking. This paper proposed a congestion control mechanism applying the ECN mechanism and the cross layer design to cope with temporal congestion in WSN. We experimented with the proposed congestion control mechanism using ns-2 simulator and measured the throughput of sink node. Simulation results show that the suggested mechanism can improve the performance of packet throughput by dealing with the congestion of network efficiently.

  • PDF

Development of Infrared Target for Dual-Sensor Imaging Seeker's Test and Evaluation in HILS System (이종센서 영상탐색기 시험평가를 위한 적외선 표적원 개발)

  • Park, Changhan;Song, Sungchan;Jung, Sangwoon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.29 no.11
    • /
    • pp.898-905
    • /
    • 2018
  • In this work, infrared targets for a developed hardware-in-the-loop simulation(HILS) system are proposed for a performance test of a dual-sensor imaging seeker equipped with an infrared and a visible sensor that can lock and track for ground and air targets. This integrated system is composed of 100 modules of heat and light sources to simulate various kinds of target and the trajectory of moving targets based on scenarios. It is possible to simulate not only the position, velocity, and direction for these targets but also background clutter and jamming environments. The design and measurement results of an infrared target, such as the HILS system configuration, developed for testing and evaluation of a dual-sensor imaging seeker are described. In the future, it is planned to test the lock-on and tracking performance of an imaging seeker equipped with single or dual sensors dynamically in real time based on a simulation flight scenario in the developed HILS system.