• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.62-65
• /
• 1999

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1061-1068
• /
• 2012

These days, world wide interest about global warming and environmental pollution and exhausting fossil fuel which have been main energy source in all around the world. So many country have tried to find out the solution by investing new & renewable and clean energy. Therefore LNG have been widely used as a substitution of fossil fuel and clean energy that emits less pollutant like SOx, NOx. Therefore LNG consumption has been quickly raised and LNG carriers have been getting larger for decades. In this study, high power fiber laser was used for welding of stainless steel for LNG carrier to increase its productivity. Used material was STS316L which has low carbon less than 0.03% and its thickness was 8 mm. We carried out bead, lap and butt welding by using the fiber laser which has maximum power up to 5kW. As a result, we could find out that lap and butt joint was possible at welding speed of 2.0m/min and 3.0m/min respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1373-1377
• /
• 2014

Hot-stamping is a method of obtaining ultrahigh-strength steel by simultaneously forming and cooling boron steel in a press die after it has been heated at $900^{\circ}C$ or above. After heat treatment, boron steel has a strength of 1500 MPa or more. This material ensures a high level of quality because it overcomes the spring-back phenomenon, which is a problem associated with high-strength steel materials, and the degree of dimensional precision is improved by 90 or more because of the good formability compared with existing types of steel. In this study, the welding characteristics were identified through the butt and lap welding of hot-stamped steel using a disk laser. Full penetration was obtained at a faster speed with butt welding compared to lap welding, and a white band was observed in every specimen.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.165-175
• /
• 1997

In this paper, the stress, buckling and vibration analyses have been performed for several case with the spot weld stiffened rear side frame, the unstiffened rear side frame and the dual thickness laser weld rear side frame. For stress and vibration analyses, the clamped boundary condition with spring supports are used. But for the buckling analyses, the both ends simply supported boundary conditions are used. For the nummerical analyses, ANSYS 5.0 code is adopted. Maximum stress of the spot weld stiffened rear side frame occurs in the main frame and is 80.9 MPa. Maximum strain is 501 .mu.. The maximum stress of the dual thickness laser weld rear side frame of 1.8mm thickness structure is equal with the stress of spot weld stiffened frame. The weight of dual thickness laser weld frame can be reduced about 17.2%. For the stiffened spot weld rear side frame with both ends simply supported boundary conditon, the bucking load is 52.54 kN. When the thickness of the dual thickness laser weld rear side frame become 1.9mm thickness structure, the buckling load of the stiffenerd rear side frame is equal to that of dual thickness laser weld frame. The reduction of the structure weight is about 5%. The fundamental natural frequency of the stiffened spot weld rear side frame for bending mode is 163.6 Hz and that of the dual thickness laser weld rear side frame is 179.8 Hz.

• Laser Solutions
• /
• v.7 no.1
• /
• pp.17-28
• /
• 2004

1960년 인류 최초의 레이저 빔 발진이 성공한 이후, 불과 40년 만에 레이저는 우리 생활의 일부분으로 여겨질 만큼, 그 활용이 광범위하게 이루어지고 있다. CD 플레이어에서 반도체 레이저는 데이터를 읽어 음악을 만들어 내며, 놀이 공원에서는 환상적인 영상 쇼를 연출하며, 인터넷으로 세계를 잇는 광케이블에도 레이저가 정보를 전달하고 있다. 또한 레이저는 프린터로 활자를 인쇄하고, 물품의 바코드를 인식하며, 양복을 재단하며, 강판을 자유자재로 절단, 용접하기도 하며, 얼굴의 점과 여드름 제거 및 라식 수술도 널리 행하여지고 있다(중략)

• The Optical Journal
• /
• s.125
• /
• pp.28-31
• /
• 2010

지구 온난화 혹은 에너지 고갈 문제에 대응하기 위하여 새로운 소재에 대한 요구가 증가하고 있다. 또한 국내 제조업의 국제적인 경쟁력을 확보하기 위하여 고강도강, 비철재료 등 고기능 소재의 산업 적용이 증가하고 있다. 종래의 철강소재에 비해 새로운 소재들은 가공이 까다로울 뿐만아니라 상대적으로 높은 정밀도를 필요로 한다. 레이저는 높은 에너지 강도를 갖는 일종의 빛이며, 비접촉으로 재료를 가공하는 것이 가능하다. 또한 동일한 장치를 이용하여 용접, 절단 열처리 등 대부분의 재료 가공이 가능하며 기존의 가공 방법에 비하여 가공속도가 빠를 뿐만 아니라 가공품질이 우수한 장점이 있기 때문에 산업 적용이 급격히 증가하고 있는 기술이다. 레이저를 이용하여 재료를 가공하는 방법에는 MEMS 등의 초미세 가공으로부터 조전용 후판에 이르기까지 다양하지만 본 보고에서는 출력 1kW 이상의 레이저를 이용한 금속의 용접 및 절단 가공에 대해서 서술하였다. 금속의 가공에 이용 가능한 출력 1kW 이상의 레이저는 $CO_2$ 레이저, YAG 레이저, Diode 레이저 등이 있다.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2000.11a
• /
• pp.32-35
• /
• 2000

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2000.11a
• /
• pp.36-37
• /
• 2000

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1999.05a
• /
• pp.27-28
• /
• 1999

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1999.05a
• /
• pp.37-38
• /
• 1999