• E2M - 전기 전자와 첨단 소재
• /
• 제10권3호
• /
• pp.289-294
• /
• 1997

디지탈 비디오 디스크의 약어로 지칭되는 DVD는 현대 과학이 이루어낸 레이저 광에 의한 정보의 기록과 재생을 한층 승화시킨 차세대 package형 광 기록 매체이다. 앞으로 이 제품군은 기존에 분리되어 있던 가전과 컴퓨터의 응용분야를 이어주는 교량역할을 할 새로운 개념의 상품으로 기대된다. 본 고에서는 DVD의 기술적 배경 및 이의 구현을 위해 활용된 요소기술, 그리고 미래기술로의 흐름에 관해 소개고자 한다.

• Tribology and Lubricants
• /
• 제38권6호
• /
• pp.261-266
• /
• 2022

Notably, laser surface patterning facilitates tribological applications under lubricated sliding contacts. Consequently, a special pattern that can reduce the coefficient of friction under contact is considered necessary for improved machine efficiency. However, inappropriate pattern designs produce higher friction coefficients and cannot reduce friction. In this study, we use cast iron pins as specimens to investigate their friction and wear characteristics. Moreover, we experimentally investigate the correlation between the friction reduction effect and the design of groove crosshatch patterns fabricated with various angles and widths. We conduct a friction test using a pin-on-disc type tribometer under grease lubrication to study the friction reduction effect of the specimens, and we observe that the average coefficient of friction changes with the crosshatch angle and width. The experiment reveals that grooved crosshatch specimens with a crosshatch angle of 135°maximize friction reduction. The coefficient of friction of the groove specimens with a width of 120 ㎛ is lower than that of the specimens with a width of 200?. The friction reduction effect of the width of the groove is attributed to the density of the groove pattern. Thus, grooved crosshatch patterns can be designed to maximize friction reduction, and the friction property of a grooved crosshatch pattern is found to be related to its width and angle.

• 대한기계학회논문집A
• /
• 제33권6호
• /
• pp.614-619
• /
• 2009

An engine for marine propulsion and power generation consists of several cylinder liner-piston sets. And the oil groove is on the cylinder liner inside wall for the lubrication between a piston and cylinder. The machining process of oil groove has been carried by manual work so far, because of the diversity of the shape. Recently, we developed an automatic grinding robot system for oil groove machining of engine cylinder liners. It can covers various types of oil grooves and adjust its position by itself. The grinding robot system consists of a robot, a machining tool head, sensors and a control system. The robot automatically recognizes the cylinder liner's inside configuration by using a laser displacement sensor and a vision sensor after the cylinder liner is placed on a set-up equipment.

• 열처리공학회지
• /
• 제10권3호
• /
• pp.165-171
• /
• 1997

Laser hardening for the piston ring groove of ductile cast iron was tried. Mechanical and microstructural investigation for the hardened area indicated that the laser heating technique could replace conventional induction hardening process completely and further showed that post grinding process would be eliminated by minimizing bulging of heat treated area. In laser hardening, the volume increase caused by martensitic phase transformation proved to be less than $10{\mu}m$, which insures no post machining on the hardened surface. As expected, the depth of hardening was inversely proportional to the beam scanning velocity and the highest surface hardness was obtained at the beam velocity of 0.75m/min. Heat treatment using phosphate coating demonstrated quite comparable result to the case of graphite suscepter.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.594-598
• /
• 2019

HfZnO 박막 위 패턴 전사 기법을 이용하여 기존의 러빙법을 대체하는 배향 공정에 대하여 연구하였다. 정렬 패턴은 레이저 간섭 리소그래피를 이용하여 실리콘 웨이퍼 위에 제작하였다. 졸겔 공정을 이용하여 HfZnO 용액을 제작하였고, 유리기판 위에 스핀코팅하였다. 미리 제작한 정렬패턴을 스핀코팅된 HfZnO 위에 올려놓고, $100^{\circ}C$에서 30분간 소성하였다. HfZnO 박막에 평행한 그루브가 형성되었음을 atomic force microscopy 와 scanning electron microscopy로부터 확인할 수 있었다. HfZnO 박막을 이용하여 액정 셀을 제작하였으며, POM 분석으로부터 액정이 균일하게 정렬되었음을 확인할 수 있었다. 액정은 $0.25^{\circ}$의 프리틸트 각을 가졌으며, 수평배향 특성을 보여주었다. 액정 분자는 평행한 그루브에 의한 HfZnO 박막 표면 이방성에 의하여 균일하게 정렬되었음을 확인할 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제23권4호
• /
• pp.101-105
• /
• 2016

최근 자연모방을 이용한 소수성 표면 가공이 많은 관심을 끌고 있다. 대표적인 가공 방법으로 기계적 가공, 포토리소그래피 가공, 레이저를 이용한 공정이 있다. 본 논문에서는 구리필름에 UV 펄스 레이저를 직접 조사해 마이크로 그루브를 형성하고 상온에서의 산화를 통해 표면의 거칠기를 증가시켜 소수성 표면을 제작하였다. 패턴 생성 뒤 일정 시간 산화를 시킨 후에 측정된 접촉각은 산화를 시키기 전보다 약 $30{\sim}70^{\circ}$까지 증가함을 보인다. 본 연구 결과를 통해서 화학적인 처리과정 없이 보다 안정한 소수성 표면을 제조할 수 있음을 확인하였다.

• Tribology and Lubricants
• /
• 제35권5호
• /
• pp.294-299
• /
• 2019

Most previous studies on water repellent surfaces using lasers rely on the use of pico- or femtosecond lasers. However, in industrial application, these methods have the disadvantages of high cost and low efficiency. In this study, we implement a hydrophobic surface using a high-power general-purpose diode laser. We have fabricated the microsurface using laser groove processing technology, and we present the correlation of wettability characteristics with space and width. The metal material is stainless steel (SUS 304), and the groove height during laser processing is set to $30{\mu}m$ to evaluate the wettability based on the gap and width of various grooves. Results show that the contact angle of the groove-shaped surface is increased by $40^{\circ}$ or more as compared with the surface without patterning, and the contact angle in the parallel direction is greater than that in the perpendicular direction. Results from contact angle hysteresis measurement experiments show that the groove width has a greater influence on the contact angle history than does the gap between grooves. In addition, the coating reveals that the contact angle can be increased using a chemical method and that the laser grooving process can further improve the wetting properties of the surface.

• Design & Manufacturing
• /
• 제18권3호
• /
• pp.30-36
• /
• 2024

As the demand for biomaterials and medical devices increases due to advancements in medical technology and the rising average lifespan of the population, the importance of surface treatment technology for biometallic materials used in orthopedic implants is highlighted. Achieving stable mechanical attachment between the implant and human bone, specifically bone cell adhesion, is crucial. Without proper adhesion, issues such as inflammation and reduced load-bearing capacity can occur, leading to the need for implant reimplantation. Therefore, this paper focuses on creating a micro-groove pattern using a pulsed nanosecond laser on the surface of a titanium alloy (Ti6Al4V), a biometallic material, to promote cell adhesion. To evaluate the effectiveness of the pattern in enhancing cell adhesion, MG-63 osteoblasts were cultured on the micro-groove patterned surface, and their adhesion and morphological changes were analyzed. This study confirms the potential of laser processing as a surface treatment method for biometallic materials.