• The Optical Journal
• /
• s.122
• /
• pp.44-49
• /
• 2009

이번호에는 광기술컨텍트 2009년 5월호 <특집:광학기술의 한계>에서 Toda Shin-ichiro씨가 기고한 '편광소자의 광학특성의 한계' 내용을 번역하여 게재한다. 최근 노광기, 광기록을 비롯하여 레이저 가공, 광계측 등 여러 분야에 걸쳐 광원파장의 단파장화가 진행되고 있다. 이러한 상황 속에서 광학부품의 하나인 편광자의 자외화(紫外化)에 대한 필요성이 요구되고 있다. 성능적으로 밸런스가 좋은 편광자로 글랜 톰슨 프리즘을 들 수 있는데 본 고에서는 글랜 톰슨 프리즘 구조에서 파장 $\lambda$=1800nm부터 사용 가능하고 투과율도 높은 편광자와 그 제작 시의 문제점에 대해 설명하고 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.507-508
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.160-163
• /
• 2002

Micro via hole Fabrication is studied by means of minimizing method to circuit size as many electric products developed to portable and minimize. Most of currently micro via hole fabrication using laser is that fabricate insulator layer using CO2 Laser after Cu layer by etching, or fabricate insulator layer using IR after trepanning Cu by UV. In this paper, it was performed that a metal layer and insulator layer were worked upon only one UV laser, and increase to processing speed by experiment.

• The Optical Journal
• /
• s.107
• /
• pp.18-24
• /
• 2007

광기술 발전의 핵심적인 역할을 수행하는 분야는 광 계측기로 우리나라의 경우 일반 계측기기는 선진국과 큰 차이를 보이지 않고 있으나, 광계측기기를 포함한 정밀계측기기 분야에서는 뒤처지고 있는 것이 사실이다. 현대 IT 산업기술의 특징은 부품 및 반도체 소자들은 계속 고집적.고밀도로 발전하고 있으며 하드 디스크나 필름 등 기록매체도 더욱 섬세한 단위로 내려가고 있고 각종 기계공학도 더욱 매끄러운 표면처리와 정밀성을 추구하고 있다. 이러한 나노테크놀로지를 선도하기 위해서는 광학분석, 레이저 측정, 이미지 프로세싱 등 나노미터 단위의 가공 또는 계측 등을 지원할 수 있는 기기의 지원이 필수적이다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.278-279
• /
• 2003

최근 정보, 전자, 광, 반도체 등 각종 첨단산업에서는 다양한 형태와 재료의 가공방법이 요구되고 있으며 요구되는 부품의 정밀도도 마이크로 단위에서 서브 마이크로 단위까지의 고도의 정밀도를 요하는 기술들이 점차 늘어가고 있다. 또 더욱 더 소형화 되어가고 있는 마이크로 부품은 기존의 2차원 및 준 3차원에서 완전한 3차원 형태의 기술로 발달하고 있으며 현재 연구가 활발히 진행되고 있는 MEMS 분야에서 구동부 부품이라든가 또는 그를 지지하는 구조체로 쓰일 수 있어 그 활용 가치는 응용에 따라 폭이 넓다고 할 수 있다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.259-260
• /
• 2011

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.5
• /
• pp.629-635
• /
• 2006

Manufacture of motor by laser has been studying realization that was demands on market for lightening and miniaturization. Moreover. early in the 1980s. manufacture of parts for automobiles by laser welding was already successfully introduced. The purpose of this study was to develop production technology of the high quality laminated stator core for motor by pulsed Nd:YAG laser heat source. In the event of adjusting defocus and voltage to control humping in laser welding of the laminated core. sound bead could be obtained. but deep penetration was not. Therefore. explosive evaporating plasma was controlled by adjustment of peak power on pulse width. Particularly, because explosive evaporating plasma induced high peak power, made molten metal in keyhole scatter. a suitable adjustment of peak power was required to obtain sound bead. As a results of experiment. sound bead and deep penetration could be obtained.

• Journal of Convergence for Information Technology
• /
• v.9 no.5
• /
• pp.158-164
• /
• 2019

Recently many studies to reduce the noise of dental hand piece which generate inevitably mechanical sound to offend to the ear of a patient have been spotlighted. Generally, methods of adding a sound absorbing material inside the exhaust valve, air pump of machine or automobile are widely reported as optimal way to reduce the mechanical noise. In this paper we studied a new UV laser aided manufacturing of micro-porous structure of EPP substrate and applied dental hand piece to improve the efficiency of sound absorption. A lot of micro-sized pores were fabricated with UV laser processing on the surface of sliced EPP substrate. From fundamental experiments, more high-performance of micro-porous EPP substrate has finally demonstrated for sound-absorbing structure of the micro muffler inside dental hand piece, which actually has the excellent potential to apply a lot of potable machine.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.237-240
• /
• 2004

In this study, we have developed a new $UV(\lambda=355nm)$ laser micromachining technology by direct ablation method without masks. This technology allows that 3D micro parts can be fabricated rapidly and efficiently with a low price. And it has a benefit of reducing fabricating process simply. Due to micro parts' fabrication, such technologies need the control of XYZ stages with high precision, the design of optical devices to maintain micron spot sizes of laser beam and the control technology of laser focus. Also, we have fabricated a micro-channel through the developed laser micromachining technology and verified it through the results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.159-162
• /
• 2000

Wrinkles and shape distortions are generated during the forming of B-pillar(or center pillar) which is a component of the automobile side-frame. The stretch flanging modes at the joining part of the B-pillar and the roof-rail or the side-still give rise to forming problems when taior-welded blanks are applied to the side-frames. The authors simplified B-pillar lower part to T shaped section to investigate the forming behaviors. Three of die step locations and two of blank types were tested to show the effects of weld line locations and edge conditions on he forming of tailor welded blanks. The heights of body wrinkles and the strain distribution in the stretch flanged area were measured and compared.