• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2006.06a
• /
• pp.35-40
• /
• 2006

Laser welding is high power density welding method which is higher speed and productivity, lower thermal deformation, without material restrictions for car body welding. But, in case of zinc coated sheet metal welding, the gap is needed $0.1{\sim}0.2mm$ to avoid weld bead blowup. This paper describe that it used dimple and pressure roller tool to improve laser welding quality for 3-layer zinc coated sheet metal.

• Journal of Drive and Control
• /
• v.9 no.4
• /
• pp.26-31
• /
• 2012

Friction reduction between sliding hydraulic machine components is required to improve efficiency and reliability of hydraulic machineries. It is recently reported that surface texturing on sliding bearing surfaces can reduce the friction force highly. In this paper, numerical analysis is carried out to investigate the effect of dimple numbers and inlet boundary pressures on the lubrication characteristics of a parallel sliding bearing using a commercial computational fluid dynamics (CFD) code, FLUENT. The results show that the pressure distribution, load capacity, dimensionless friction force and leakage with dimple number and their locations, and inlet pressures. The overall lubrication characteristics are highly affected by dimple numbers and boundary pressure. The numerical method adopted and results can be used in design of efficient hydraulic machine components.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2352-2356
• /
• 2008

Heat transfer and performance characteristics have been investigated for a rectangular wavy duct with dimple or protrusion arrays. The test duct was 15mm in height and 105mm wide. The print diameter of the dimple/protrusion wall was 12.99mm and the depth/height of the dimple/protrusion was 3.75mm. Local heat transfer coefficients on the dimple/protrusion wall were measured using a transient TLC technique. The Reynolds number was varied from 3,000 to 10,000. For the wavy duct tested in this study, adverse static pressure characteristics occurred at turning region of the wavy duct due to secondary flows. For the wavy duct with protrusion array, higher heat transfer enhancement level of 7.4 times than smooth straight case in maximum was obtained at low Reynolds number due to the high heat transfer enhancement by vortex flows. Also, the protrusion array increased the performance level of 3.0 at low Reynolds number of 3,000.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2029-2032
• /
• 2008

In this study, we have investigated the effects of upstream rectangular winglet pair (RWP) on the heat/mass transfer coefficients in a dimple. Dimple print diameter was fixed at 20mm and the dimple depth was 4.0mm (0.4H). The dimple surface was coated with naphthalene for mass transfer experiment and the test plate was positioned at a rectangular straight duct whose aspect ratio (W/H) was 20. A rectangular winglet pair was positioned at y/d=-2.5. The RWP angle ($\beta$) was varied from $15^{\circ}$ to $60^{\circ}$. The Reynolds number, based on the duct height (H), was 5,000. with changing the RWP angle ($\beta$), the induced vortices had different flow characteristics; longitudinal or transversal vortices. These variation of induced vortices affected on the heat/mass transfer characteristics in the dimple.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.598-603
• /
• 2016

현대의 스포츠는 과학기술의 발전과 함께 성장하고 있고 골프종목 역시 재료역학적, 공기역학적 발전에 따라 비거리를 점점 늘려가고 있다. 하지만 현재까지의 비거리에 대한 연구는 골프공과 골프채의 재료의 변화와 딤플이 있는 골프공의 공기역학적 연구에 집중해 있었고 요즘에 들어서야 클럽헤드의 공기역학적 형상에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 골프 경기 중 가장 먼 비거리를 만들어 내는 골프채인 드라이버의 단순화된 2차원 클럽헤드 형상을 설정하고 항력을 줄일 여러 가지 방법을 적용하여 최소의 항력을 갖는 헤드 형상을 찾아보았다. 연구결과 $10.2^{\circ}$의 로프트를 갖는 클럽헤드는 chord 길이가 face 높이의 3.2배이고, trailing edge가 face의 중심보다 전체 face높이의 10% 아래에 있을 때 가장 적은 항력을 얻을 수 있었다. 결과적으로 이 형상과 기존형상의 스윙 속도 차는 약 2mph로 5yard의 비거리 차이를 가져온다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.423-427
• /
• 2005

Sandwich structures, which are composed of a thick core between two thin faces, are commonly used in many engineering applications because they combine high stiffness and strength with low weight. Depending on the application of a particular sandwich structure, various types of cores can be used. The production of sandwich sheets by a rolling process, which is a more efficient and economical approach compared to other types of processes, has become an increasingly important subject of study. In this paper, we have studied the embossing structure of sheet type and developed embossing roll mold with $\Phi3$ pattern and roll forming system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.130-133
• /
• 2005

Efficient finite element method has been introduced for metallic sandwich plates subject to 3-point bending. A full model 3-point bending FE-analysis shows that plastic behavior of inner structures appears only at the load point. So, Unit structures of sandwich plates are defined to numerically calculate the bending stiffness with recurrent boundary condition of pure bending. And then equivalent models with same bending stiffness and strength of full models are designed analytically. It is demonstrated that results of both models are almost same and FE analysis method with equivalent models can reduce analysis time effectively.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.129-134
• /
• 2001

The drag reduction of the cylinder having square dimpled surface was studied by the measuring the drag force acting on the cylinder. The level of the drag reduction was changed by the arrangement shape of the square grooves and Reynolds number. The drag of the cylinder was reduced about 28% with proper arrangement of square grooves. The flow field around the cylinder having grooves at the minimum drag was visualized by using post color ink in order to see the influence of the grooves. In this case, the separation points were sifted rearward and the wake region was smaller than that of the smooth cylinder.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.233-239
• /
• 2002

The drag reduction of the cylinder having square dimpled surface was studied by the measuring the drag force acting on the cylinder. The level of the drag reduction was changed by the arrangement shape of the square grooves and Reynolds number. The drag of the cylinder was reduced about 28% with proper arrangement of square grooves. The flow field around the cylinder having grooves at the minimum drag was visualized by using post color ink in order to see the influence of the grooves. In this case, the separation points were silted rearward and the wake region was smaller than that of the smooth cylinder.

• Journal of Drive and Control
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2016

In hydraulic machinery, the hydraulic fluid acts primarily as working fluid and secondarily as a lubricant. Hence, the viscous friction force acting on the sliding components should be reduced to improve the mechanical efficiency. It is now well known that the surface texturing is a useful method for friction reduction. In this study, using a commercial computational fluid dynamics (CFD) code, FLUENT, the lubrication characteristics of a surface textured slider bearing under high boundary pressure difference is studied. The streamlines, velocity profiles, pressure distributions, load capacity, friction force and leakage flowrate are highly affected by the film thickness ratio and the textured region. Partial texturing at the inlet region of the inclined slider bearing can reduce both friction force and leakage flowrate than in the untextured case. The present results can be used to improve the lubrication characteristics of hydraulic machinery.