• Journal of Advanced Marine Engineering and Technology
• /
• 제17권3호
• /
• pp.12-23
• /
• 1993

Combustion phenomenon in diesel engine is mainly governed by characteristics of fuel injection and fuel spray system affected by its dimensions and operating condition. Fuel supply system is consisted of fuel injection pump, high pressure pipe and injection nozzle. In order to develope the more economical diesel fuel injection system, it is in need to carryout the fairly wide range experiments, which is quite impossible. Therefore, theoretical analysis for the numberous parameters is powerful method in this case. In the present study, equations of continuity of fuel oil in fuel injection system are solved to obtain the flow and pressure variation in diesel fuel system affected by injection pump speed, plunger diameter, pipe length and nozzle opening pressure.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.18-27
• /
• 2000

The spray models incorporated into the GTT code were tested for free spray, spray in swirling flows and the sprays impinging on a flat wall. And the validity of the models has been confirmed by comparing the calculated results with the experimental data. Using this code, the spray behavior in the diesel combustion chamber have been numerically analyzed for variation of nozzle diameter. Also, the effects of nozzle diameter in diesel combustion was investigated experimentally by measuring the performance in a D.I engine. This study provides the information for the spray characteristics and emissions with variation of nozzle diameter. As a result, it has shown that decreasing nozzle diameter resulted in improving smoke and specific fuel consumption in a middle speed range.

• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.553-559
• /
• 2006

Most diesel injector, which is currently used in high-pressure common rail fuel injection system of diesel engine, is driven by the solenoid coil energy for its needle movement. The main disadvantage of this solenoid-driven injector is a high power consumption, high power loss through solenoid coil and relatively fixed needle response's problem. In this study, a prototype piezo-driven injector, as a new injector mechanism driven by piezoelectric energy based on the concept of inverse piezo-electric effect, has been designed and fabricated to know the effect of piezo-driven injection processes on the diesel spray structure and internal nozzle flow. Firstly we investigated the spray characteristics in a constant volume chamber pressurized by nitrogen gas using the back diffusion light illumination method for high-speed temporal photography and also analyzed the inside nozzle flow by a fully transient simulation with cavitation model using VOF(volume of fraction) method. The numerical calculation has been performed to simulate the cavitating flow of 3-dimensional real size single hole nozzle along the injection duration. Results were compared between a conventional solenoid-driven injector and piezo-driven injector, both equipped with the same micro-sac multi-hole injection nozzle. The experimental results show that the piezo-driven injector has short injection delay and a faster spray development and produces higher injection velocity than the solenoid-driven injector. And the predicted simulation results with the degree of cavitation's generation inside nozzle for faster needle response In a piezo-driven injector were reflected to spray development in agreement with the experimental spray images.

• 해양환경안전학회지
• /
• 제23권5호
• /
• pp.549-557
• /
• 2017

본 연구에서는 강화되는 황산화물 및 입자상물질의 배출규제를 만족시키기 위한 후처리장치인 스크러버(scrubber)에 대한 수치해석적 연구를 수행하였다. 먼저 수치 해석을 통하여 기존 스크러버의 문제점을 파악하고, 이러한 문제점들을 개선할 수 있는 새로운 형태의 와류형 스크러버를 설계하여 분석하였다. 그 결과 와류형 스크러버에서 배기가스는 하부에서 와류를 형성하고 그 중 일부는 바닥면을 통과하여 가이드 베인을 따라 배출되는데, 이 때 수직 방향의 압력구배는 크지 않으나 배플의 내 외부에는 압력차가 발생하는 것으로 나타났다. 배기가스 유선의 형태를 확인한 결과, 물이 분사되지 않는 경우에는 물이 분사되는 경우에 비해 가이드 베인을 따라 출구까지 일정하게 유동하였으며, 유동의 형태에 가이드 베인과 노즐의 배열 및 수압 등이 영향을 미치는 것으로 확인되었다. 와류형 스크러버의 경우 입 출구의 차압이 기존의 스크러버 대비 절반 이하로서 기관의 배압에 미치는 영향이 훨씬 적은 것으로 나타났다.