• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.481-487
• /
• 2019

Additive manufacturing is a state-of-the-art manufacturing process technology in which three-dimensional structures are fabricated by laminating two-dimensional sections of a structure using various materials such as plastic, ceramics, and metals. The additive manufacturing technology has the advantage of high design freedom, while the surface property (roughness) of the finished product varies depending on the process conditions, which necessitates performing a post-process after the products are manufactured. In this study, the surface roughness of a structure made of polyamide 12, which was manufactured by SLS (Selective Laser Sintering) and MJF (Multi Jet Fusion) process was compared. The processing condition was classified by the building orientation of structure as 0, 45, and 90 degrees, which is the angle between the analytical surface and the horizontal plane of the fabrication platform. Structures with a hole of various diameters ranging from 1mm to 10mm were manufactured and the hole characteristics (ratio of hole depth to diameter) and results of the specimens were compared. As a result of the surface characteristics analysis, the surface roughness value of the specimens manufactured with a building orientation of $45^{\circ}$ was the highest in both technologies. In the case of the through-hole structure fabrication, the shape was maintained with 5mm and 10mm diameter holes regardless of the building orientation, although the hole forming was difficult for the smaller holes.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.97-105
• /
• 2020

Recently, as the data speed and operating frequencies of Ethernet keeps increasing, electro magnetic interference (EMI) also becomes increasing. The generation of such EMI will cause malfunction of near electronic devices. In this study, EMI filters were applied to reduce the EMI generated by DC-DC SMPS (switching mode power supply), which is the main cause of EMI generation of Ethernet switch. As the EMI filter, MLCCs with excellent withstanding voltage characteristics were used, which had advantages in miniaturization and mass production. Two types of EMI MLCC filters were used, which are X-capacitor and X, Y-capacitor. X-capacitor was composed of 2 MLCCs with 10 nF and 100 nF capacity and 1 Mylar capacitor. Y-capacitor was consisted of 6 MLCCs with a capacity of 27 nF. When only X-capacitor was applied as EMI filter, the conductive EMI field strength exceeded the allowable limit in frequency range of 150 kHz ~ 30 MHz. The radiative EMI also showed high EMI strength and very small allowable margin at the specific frequencies. When the X and Y-capacitors were applied, the conductive EMI was greatly reduced, and the radiation EMI was also found to have sufficient margin. In addition, X, Y-capacitors showed very high insulation resistance and withstanding resistance performances. In conclusion, EMI X, Y-capacitors using MLCCs reduced the EMI noise effectively and showed excellent electrical reliability.

• The Journal of the Korea Contents Association
• /
• v.22 no.1
• /
• pp.162-171
• /
• 2022

According to <2020 Industry character white paper> No.1 character products are toys, which are 58%, and every year. the Art-toy development is receiving attention. Because of this situation, the Art-toy market is growing, and the number of Art-toy artists and companies is also rising. As the Art-toy markets are growing variety of Art-toy needs to be created, and also need to analyze and researched about Art-toy. The Art-toy is primarily personified and is created based on a human proportion body figure. The research conducted a case analysis of Art-toys and a preference survey for general adult men and women through the head-to-head ratio, which is a measurement standard for human proportions. As a result, The Art-toy has an ideal shape ratio and crafting area according to the body ratio. As preference research from men and women, men show seven heads life-sized and women appeared to three heads life-sized figures are most popular. The two and three heads life-sized have a high preference, and the Art-toy case had a relationship. As the Art-toy case and research of preference help to develop the Art-toy design, and following this research will be used as basic data when creating or researching about the Art-toy in the future.

• Design Convergence Study
• /
• v.15 no.2
• /
• pp.1-15
• /
• 2016

The purpose of this study is to identify the characteristics of aging-friendly technology that can be integrated into future smart homes in an aging society. The literature survey and content analysis method were used to collect and analyze data. Papers of the international journal ICOST (International Conference on Smart Homes and Health Telematics) that professionally deal with converged technologies were analysis units. Sixty-five papers among 215 papers published from 2007 through 2014 were selected on the basis of end-users orientation. Totally, out of 65 papers 76 technology items were extracted. Characteristics of those technologies were analyzed focusing on purpose and application methods. As results, in terms of purpose, the technologies were oriented to provide both of psychological and physiological support to the users, focusing on the safety, convenience, health and entertainment to extend independent life of the elderly. Among the application method such as building structure, furniture, product, wearable device and free movable robot, product were dominant. Through those results, the aging-friendly technology is expected to alleviate a wide range of issues in aging society.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.275-283
• /
• 2023

The progressive wear of teeth is a physiologic process of aging, but excessive wear can lead to occlusal disharmony, tooth sensitivity and pulp exposure, decreased masticatory efficiency, and aesthetic problems. It should be treated by evaluating the cause of tooth wear and establishing a stable centric relation with appropriate vertical dimension of occlusion and occlusal plane. The present case report successfully rehabilitated a full-mouth case of a severely worn dentition with the use of digital facebow transfer and virtual articulator.

• Journal of Korean Home Economics Education Association
• /
• v.35 no.4
• /
• pp.13-31
• /
• 2023

The purpose of this study was to develop a career education program linked to home economics in middle school to improve adolescents' ability to respond to the rapidly changing future society. The research procedure was conducted in four steps: Analysis, Design, Development, and Evaluation. In the analysis step, related prior studies were analyzed to identify the units and contents that linked home economics and career education. In the design step, learning topics and contents according to the design thinking process were selected and the overall program process was designed to cultivate entrepreneurship based on the textbook analysis results. In the development step, the goals and achievement standards of school career education linked to home economics were set for each class, and a total of eight teaching and learning plans, twenty-three types of teaching and learning materials, and expert validity verification questionnaires were developed. In the evaluation step, the validity of the developed program was verified by nine experts. The developed program was verified for overall programs, and the validity of the program was 0.94. It is expected that the career education program linked to home economics will contribute to foster the adolescents' entrepreneurship so they can design their future on their own and allow them to manage their life proactively.

• Tunnel and Underground Space
• /
• v.21 no.6
• /
• pp.471-479
• /
• 2011

The velocity horizontal response spectra using the observed ground motions from the recent 5 macro earthquakes, equal to or larger than 4.8 in magnitude, around Korean Peninsula were analysed and then were compared to the acceleration horizontal response spectra, seismic design response spectra (Reg Guide 1.60), applied to the domestic nuclear power plants, and finally the Korean Standard Design Response Spectrum for general structures and buildings. 102 velocity horizontal ground motions, including NS and EW components, were used for velocity horizontal response spectra and then normalized with respect to the peak velocity value of each ground motion. First, the results showed that velocity horizontal response spectra have larger values at the range of medium natural period, but acceleration horizontal response spectra have larger values at the range of short natural periods. Secondly, the results also showed that velocity horizontal response spectra exceed Reg. Guide 1.60 for longer natural periods bands less than 6-7 Hz. Finally, the results were also compared to the Korean Standard Response Spectrum for the 3 different soil types(SC, SD, and SE soil type) and showed that velocity horizontal response spectra revealed much higher values for the frequency bands below 1.5(SC), 2.0(SD), and 3.0(SE) seconds, respectively, than the Korean Standard Response Spectrum. The results suggest that the fact that acceleration, velocity, and displacement horizontal response spectra have larger values at the range of short, medium, and long natural periods, respectively, can be applied consistently to those form domestic ground motion, especially, the velocity ground motion. Information on response spectrum at such medium range periods can be very important since the domestic design of buildings and structures emphasizes recently medium and long natural periods than short one due to increased super high-rise buildings.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.3
• /
• pp.85-96
• /
• 2011

The purpose of this study, Around Gyeonggi-do cultural propertie Change the Present Condition not apply to analyze the results of processing Change the Present Condition of the trends and issues, and characteristics are derived and In determining the basic data processing of the Change the Present Condition presented are intended to be. 248 of 2009 regulated by Gyeonggi-do Cultural Assets committee agenda for consideration of the more than three times a copy of 15 were enrolled in the study. Review the results of the Change the Present Condition permit, permit held, to review classified information and analyzes the results of processing and complementary. Application for change processing standards and their comparison with the Change the Present Condition of cultural property through the deliberations and conclusions should analyze the results. As a result of research first, decision to allow processing of the application is characterized by a variety of facilities and the lower floors many times the result of the approval, the construction of cultural property conditioned space after the application complements the exterior of the building permit has been determined, applied to the current building near where the decision to allow the existence of is the main reason Second, decisions permit held, if requested neighborhood facilities lots of facilities and construction of large-scale is the most. Results from the first hearing until a final decision is not much change in results and cultural property surroundings due to the building of the reason for rejection was the most inhibited. Third, reconsideration of the decision if the city's development projects and other large development projects, and floors of the building height did not significantly affect the change. Above all, Decisions based on the results of the presence or absence was a big acts and the reason for reconsideration, and on-site investigation is the most. Fourth, It is based on the processing of Change the Present Condition that has been passed or rejected treatment and standards of treatment in two areas where the two sections across any side of the strict criteria were applied. Cultural Properties and applications with the distance increases, the rejection and the reconsideration decision is limited Such distance did not affect the decision to allow.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.5
• /
• pp.93-107
• /
• 2018

The concepts of geotourism and geoparks have emerged due to the paradigm shift in tourism and the increased recognition of geosites and geoheritage as legacies that must be protected and preserved. The number of geoparks designated by UNESCO and national governments is increasing globally. The purpose of this paper is to propose directions for enhancing Jeju Geopark to perform as a geological educational venue. This study reviewed the present conditions of the education and communication, the media, and the facilities of the geopark with respect to the required conditions to be effective for geological education. Data surveys, field surveys, visitor questionnaires, and interviews were conducted to examine the educational and guidance system of the geopark, the physical space configuration, and the operation and management methods. The research process is as follows. First, the study analyzed the status of the education and communication in Jeju Geopark, according to the criteria of the UNESCO GGN, using data acquired from the survey. Second, the study analyzed and evaluated the educational and communication facilities, and media, focusing on four aspects of the geopark: the geo-trail, spatial composition and layout, communicational and educational facilities, and the system and design of signboards. Third, the study assessed the perception and satisfaction of visitors to the geopark. Fourth, the study summarized the potential and limitations of the Jeju Geopark through in-depth interviews. The four analyses showed that enhancements in the exploration environment, communication, media, and operation and management system are all necessary for effective geological education. Based on these results, this study suggests directions for enhancing the geopark in the four following aspects. Management and maintenance must be improved to meet UNESCO criteria, while the improvements in the visiting environment quality, the supplementing of communication and facilities, and enhancements in the organization and system of operation and management also must be taken on.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.362-365
• /
• 2007

Cyanobacteria have been identified as one of the most promising group producing novel biochemically active natural products. Cyanobacteria are a very old group of prokaryotic organisms that produce very diverse secondary metabolites, especially non-ribosomal peptide and polyketide structures. Large multienzyme complexes which are responsible for the non-ribosomal biosynthesis of peptides are modular for the addition of a single amino acid. An activation of amino acid substrates results in an amino adenylate occuring via an adenylation domain (A-domain). A-domains are responsible for the recognition of amino acids as substrates within NP synthesis. The A-domain contains ten conserved motifs, A1 to A10. In this study, ten conserved motifs from A1 to A10 were checked regarding their amino acid sequence of the NRPS-module of Microcystis aeruginosa PCC 7806. The part of the amino acid sequence chosen was that which contained as many conserved motives as possible, and then these amino sequence were compared between other cyanobacteria to design a new degenerate primer. A new degenerate primer (A3/A7 primer) was designed to detect any putative NP synthetase region in unkwon cyanobacteria by a reverse translation of the conserved amino acid sequence and a search for cyanobacterial DNA bank.