• Tribology and Lubricants
• /
• v.27 no.2
• /
• pp.95-100
• /
• 2011

The brake disc materials for railway vehicle have been mainly used cast-iron. The brake disc and pad should be light, resist to a thermal crack and absorb enough friction energy. In order to satisfy this requirement, aluminum alloy brake disc for railway vehicle has been newly developed. The aluminum itself has not been considered the friction material for railway vehicle. However, in the case of aluminum composite with dispersed ceramic particles, friction characteristics, resistance to wear and heat are much improved. In the present study, aluminum composite brake disc of 20% ceramic particle and three kinds of organic pads have been tested in dynamometer. The results show that Al MMC brake disc and pad have good friction coefficient and wear rate, and thermal cracks in brake disc have not been initiated. Also, the Al MMC brake disc can be applied to railway vehicle of 150 km/h.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.665-669
• /
• 2007

This study investigates the temperature change and thermal conductivity for the braking disc of the railway vehicle due to the types of train and service conditions. The temperature change was measured by non-contact Infrared thermometers. Average temperature was measured between $79.32^{\circ}C$ and $104.46^{\circ}C$ due to types of train and service section. In the same service section, the surface temperatures of Saemaul train were higher than Mugungwha train; the reason might have been the average service speed of Saemaul train (83km/h) was higher than Mugungwha train (107km/h), and the weight was similar 39t (Mugungwha) and 39.3t (Saemaul). But the maximum surface temperature was measured on the Mugungwha train; however the difference was not too big with the maximum temperature of Saemaul train. Also, the disc surface temperatures were changed due to the material of lining; metal and non-asbestos, on the same train and the same service section. In addition. the thermal conductivity was tested the thermal conductivities were increased by the increasing of the temperature. The change is too big between $100^{\circ}C$ and $200^{\circ}C$. But each average value is small. and the mechanical property change is very low. As a result, we conclude that this disc is suitable for usage between $100^{\circ}C$ and $300^{\circ}C$.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.219-225
• /
• 2000

This study is to develop a Fe-based disc brake lining with sponge structure for rolling stock of 150km/h train and to concept design with 3 groove type for brake disc reducing hot hair-crack and certainly friction coefficient. The developing brake lining would be to presumption of saving 300 million won during one year

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.43-48
• /
• 2005

In order to facilitate technical exchange among nations and/or institutes through the establishment of mutual recognition and the reliability guarantee of testing results by testing standards standardization, the interlaboratory comparison tests on brake discs and linings between KRRI and CARS were conducted. So far, two ways of comparison tests were performed for a better understanding of mutual recognition and standardization in railroad brake linings between Korea and China. In this paper, the first and second comparison testing results have been summarized, and the suggestions for the future research work are also presented to encourage extensive research on comparison study of railroad brake discs and linings between KRRI and CARS. Eventually, the final goal of the current research will be the establishment of standardization of railroad testing standards.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.55-58
• /
• 2005

During braking at a train, thermal energy is generated due to the frictions between disk and lining and wheel and shoe. In general, the braking transfers the kinetic energy into thermal energy. Therefore, the frictional characteristics are varied according to the braking force, the thermal resistance, and the thermostable, etc. Using a Dynamo testing we have studied the frictional characteristics and the thermal distribution to investigate a stable speed and to improve the testing method through comparing and analysing in the measurement of the thermocouple temperature and infrared camera.

• Tribology and Lubricants
• /
• v.27 no.5
• /
• pp.269-274
• /
• 2011

The purpose of this paper is to study and analyze the improvement method for the failure examples including the vehicle brake system in actual field. It was verified that the indicator plate of pad wear scratched the brake disk because of wearing after displacement of non- identification parts pad. The caliper of other vehicle was installed with brake system verified the phenomenon produced groove in center point because of one side wear when the pad was not fully contacted with the rub disk by other action surface pressure and pad action condition. It verified that the crack phenomenon fatigue was produced by brake thermal deformation because of decreasing the thickness by grinding to modify the non-uniformed wear of brake disk. It verified that the friction sound was produced by the friction phenomenon because of non-uniformed contact of lining and an alien substance with inner of the drum and lining braking by crack phenomenon with brake drum surface.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.363-368
• /
• 2003

The Inter-laboratory comparison test which is demanded on the authorized test of ISO 17025 is the program to guarantee the reliability for test results of test organization. In order to apply to the field of railway, brake disk lining as one of the railway components has been selected and the comparison test is executed for the purpose of guaranteeing the reciprocal reliability for the test result of both organizations and enlarging the substantial technique exchange of both nations by the standard establishment with test procedures and test programs from now on.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.93-98
• /
• 1999

Numerical simulation is conducted to clarify the heat transfer and fluid flow characteristics of brake disk-lining for rolling stock. Multiple rotational reference frame, k-epsilon turbulent model and SIMPLE algorithm based on finite volume method are used to solve the physical disk-lining model. The governing equations are solved by TDMA(TriDiagonal Matrix Algorithm) with line-by-line method and block correction, From the results of simulation, the characteristics of cooling pattern is strongly affected by the grooves in lining. The face lift of lining affects on the temperature distribution of rear surface of lining as well as the front surface of that. Due to the grooves in lining, it will be expected to extend the maintenance life circle of lining.