• Journal of the KSME
• /
• v.33 no.2
• /
• pp.145-151
• /
• 1993

전자산업이 고도화되어감에 따라 전자기술은 소재 . 기계분야와 복합된 기술의 발전이 가속화 되어 가고 있다. 특히 이 글에서는 응력해석 CAE 기술이 전자부품산업에 적용되는 사례를 소 개하고자 한다. 그 중 하나는 하드디스크의 정밀부품 중의 하나인 스핀들 모터용 Hub의 절삭 가공시 고려하여야 하는 탄성 변형량을 해석하고 이를 적용하는 사례이고 또 하나는 Audio Deck의 Capatan Shaft를 지지하는 플리스틱 Base가 신뢰성 시험도중 또는 고온 부하시 발생하는 크리프현상을 해석하여 적용하는 사례이다. 이 글에서 소개하는 두 가지 사례는 전자부품산업에 응력해석 CAE를 적용할 수 있는 예들 중 빙산의 일각에 불과할 뿐이고, 이와 유사한 전자부품에 응력해석 CAE를 적용할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.719-725
• /
• 2014

In the present study, a numerical analysis of an injection molding process was conducted for predicting the mold deformation considering non-Newtonian flow, heat transfer, and structural behavior. The accurate prediction of mold deformation during the filling stage is important to successfully design and manufacture a precision injection mold. While the local mold deformation can be caused by various factors, a pressure induced by the polymer melt is considered to be one of the most significant ones. In this regard, the numerical simulation considering both the melt filling and the mold deformation was carried out. A mold core for a 2D axisymmetric center-gated disk was used for the demonstration of the present study. The flow behavior inside the mold cavity and temperature distribution were analyzed along with the core displacement. Also, a Taguchi method was employed to investigate the influence of the relevant parameters including flow velocity, mold core temperature, and melt temperature.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04a
• /
• pp.89-92
• /
• 2001

본 논문에서는 공간 데이터베이스 시스템의 공간 데이터 크기에 의한 선별적 회복 기법을 제안하고자 한다. 기존의 대용량 데이터베이스를 위한 회복 관리 기법에는 쉐도우 기법과 변형된 로그 기법이 쓰여지고 있다. 쉐도우 기법은 물리적 응집과 잠금 경쟁 문제가 있으며, 변형된 로그 기법은 공간 데이터의 가변 크기 특성에 대한 고려가 없기 때문에 디스크 입출력이 빈번히 발생하는 문제가 있다. 본 논문에서 제안하는 회복 기법은 공간데이터 크기에 따라 각각 다른 회복 기법을 적용하여, 로그 파일에 기록되는 로그의 양을 줄이며, 또한 트랜잭션 철회시 회복 연산으로 인한 시스템의 부하를 줄이는 장점을 갖는다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4371-4377
• /
• 2012

In this paper, the structure-fluid coupled analysis is carried out in order to examine the cause of the vibration induced by fluid in the pressure-reducing valves for water. It is confirmed that there is the noise at the area of low frequency of 250Hz by measuring noise at pressure reducing valve. The flow analysis is performed by the commercial software ANSYS/CFX. The flow velocity of about 40 m/s is formed by nozzle effect, and so negative pressure is happened in the pressure reducing valve. The structure analysis is carried out with the load condition of pressure distribution by flow formed in valve. The rubber material at disk is deformed to the extent of closing up flow passage. It is confirmed that the disc deformation which is occurred repeatedly is due to noise and vibration at the pressure reducing valve.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.11
• /
• pp.1105-1110
• /
• 2012

The spine is one of the most important skeletal joints, and it strongly affects the health of the musculoskeletal system. A normal spine has an S-shape, and it is very important to maintain this shape. Recently, spinal diseases such as low back pain have increased rapidly, especially among the elderly. Some of these diseases are caused by congenital spinal disorders and sporting and accident injuries as well as by bad postures. Improper spinal postures could generate excessive disc pressure, which is related to degeneration and pain. Therefore, in this study, we investigated the three-dimensional kinematic parameters of the thoraco-lumbar joint in several bad postures using a motion capture analysis technique. Different bad postures created a significant amount of flexion/extension, side bending, and axial rotation angle compared with neutral postures. Further study is necessary to investigate the disc pressure and ligament force due to the increase in joint rotation from the bad postures.

• Journal of the Korea Convergence Society
• /
• v.11 no.5
• /
• pp.139-144
• /
• 2020

In this study, a simulation analysis on the drum itself and the brake was examined. And the analysis results were obtained by investigating the thermal analysis results and the durability through structural analysis. Through the thermal stress and structural analyses on the lining under the force due to the brake cylinder, the drum inside under the force due to the expansion of the lining and the drum under the force due to the rotation of the axis, it was confirmed at which part the amounts of equivalent stress and deformation became large. If applied to the brake disc design by combining the results of this study, it is considered to be large utilization at increasing the prevention against the thermal deformation and its durability. The results of this study can be usefully applied to the durability design that can withstand the thermal stress in the drum brake. By applying the durability analysis at the seam of railroad track by season, this investigation result is seen to be favorable as the convergent research applied to the aesthetic design.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.101-101
• /
• 2009

압전 세라믹스는 진동, 변형, 압력 등의 기계적 에너지를 전기적 에너지로 혹은 전기적 에너지를 기계적 에너지로 변환시키는 소자로서의 기능을 가지며 조성의 개선 및 제조 기술의 진보가 계속되어 큰 관심을 받고 있다. 최근 audio의 고급화 및 자동차, 평면 TV, 고성능 통신기기, 디지털방송, 홈시어터 등 스피커의 성능이 크게 부각되면서 대기업에서부터 중소기업에 이르기까지 고성능 스피커의 개발에 박차를 가하고 있다. 압전 세라믹을 이용하여 음압을 변조하는 압전 스피커는 디스크 형상의 압전 프레이트를 단층 또는 다층으로 형성하여 기존의 마그네틱 스피커와는 차별되는 형태를 가진 스피커로서 응용하는 것이다. PSN-PZT계 조성을 개발하여 $d_{33}$, 전기기계결합계수($k_p$), 온도안정성 및 내구성 향상 및 특성향상을 위한 입경 조절 및 공정을 연구하고자 한다. 디스크 형태의 압전 세라믹을 이용하여 2, 3, 4 layer 이상의 멀티레이어 시편을 제작하였고, 여러 시편에서 크기 및 형상, 접합 방법 등에 따른 특성을 최적화하여 스피커의 특성을 향상 시키고자 한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.100-107
• /
• 2013

This study aims to improve the heat performance of motor cycle disk due to the number of holes by analyzing 6 kinds of disk models. This disk performance depends on the efficiency at emitting the heat. To raise the efficiency of heat emission, holes with circle or another configuration are made on disks to emit heat fast. The distribution of temperature, heat flux, deformation and stress are analyzed. As the number of holes on disk increases, the performance of heat emission is improved. Equivalent stress is decreased and durability is improved as the number of holes on disk increases. Though the number of holes on disk is increased, the performances of heat emission and durability do not become better. The optimal model can be found by comparing models each other through this analysis result. Through this study result, the configuration of motor cycle disk is designed with optimal heat emission and durability by comparing models.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.63-69
• /
• 2014

Domestic automobile companies have adopted drum type brake system for commercial vehicles. However recently those companies have been applying disc-brake system to solve vehicle control-instability and inefficient heat discharge performance of conventional drum brake system for a medium commercial vehicle. Because the kinetic energy of a running commercial vehicle is relatively high, the brake system should discharge lots of heat energy while braking. A ventilated type brake disc has been used to increase heat discharge performance of a brake system. The vent structure of a disc highly affects cooling efficiency. This paper compares thermal characteristics of three types of vent structure in JASO C421 braking condition. It is found that the slant bend type disc has the lowest temperature and thermal stress distributions in the braking condition.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.238-241
• /
• 2008

A brake system in automobile is one of the important parts that directly affect the safety of passengers. Particularly, disk brake module is applied to almost all kinds of automobile brake system due to its remarkable braking power and braking distance. In the disk brake module of an automobile, the bolt for tire wheel is assembled to the disk brake hub by interference fit (bolt pressing process). The process induces small deformation whose range is within tens of ${\mu}m$ and this deformation may cause the runout badness of the whole disk brake module, and even braking problems such as judder or squeal phenomena which makes the loss of braking efficiency. In this study, bolt pressing fit into hub was simulated by $ANSYS^{TM}$, a commercial structure analysis program. Also, the aspect and the cause of hub displacement were analyzed and the solution for decreasing runout of hub was proposed.