• Title/Summary/Keyword: 등열속도

Search Result 4, Processing Time 0.021 seconds

Effects of Long Term Fertilizers on Growth, Yield and Grain Development of Rice (비료의 장기연용이 벼의 생육, 수량 및 미립발달에 미치는 영향)

  • Han, Hui-Seok;Sim, Jae-Seong
    • The Journal of Natural Sciences
    • /
    • v.5 no.1
    • /
    • pp.15-28
    • /
    • 1992
  • 토양에 20년간 3요소+생고를 처리하였을때 토양의 화학적 성분, 공극율, 입단구조가 잘 발달되었다. 또한 이 처리에 의하여 CGR은 영화분화기때 가장 높았으나 무처리구나 3요소단용구에서는 전생육기간을 통하여 계속 증가하는 경향을 띈 반면 3요소+생고처리구에서는 영화분화기이후 계속 감소 하는 추세을 나타내고 있다. 현미수량에 있어서는 3요소+생고처리에 의하여 11%의 증가효과가 있었으며 이것은 주로 이삭의 일.이차기경의 분화수가 증가하였기 때문이었다. 또한 미립형태에 있어서도 완전미의 비율이 높았는데 이것은 등숙속도와 매우 밀접한 관계가 있어서 등숙속도가 빠를수록 심백미, 복백미 및 동할미가 많았다. 3요소 + 생고속도는 40DAH이었다.

  • PDF

Heat Transfer Characteristics of Water Jet Impinging on Oblique Surface (경사면(傾斜面)에 충돌(衝突) 하는 수분류(水噴流)의 열전달(熱傳達) 특성(特性)에 관(關)한 연구(硏究))

  • Choi, Guk-Gwang;Na, Gi-Dae;Kim, Yeun-Young;Jeon, Sung-Taek;Lee, Jong-Su
    • Solar Energy
    • /
    • v.13 no.1
    • /
    • pp.1-10
    • /
    • 1993
  • The purpose of this research is to investigate the characteristics of heat transfer in the downward axisymmetric free water jet system impinged on a flat oblique plate which has the uniform heat flux. Experimental conditions considered were Reynolds number, distance between nozzle and Bat plate, inclination angle of heater surface and nozzle exit velocity. Local Nusselt number was subjected to the influence of Re number, Pr number, oblique angle of heating surface and local position of flat plate. In the wall region of downward surface, The secondary peak point of heat transfer appeared at the local point of X/D=-8 from the stagnation point. The stagnation heat transfer rate of this experimental study augments 2.4 times than that of laminar theorical solution. The stagnation nusselt number is function of Reynolds number, nozzle-plate spacing Prandtl number and oblique angle of impinging plate.

  • PDF

Combustion Properties of Major Wood Species Planted in Indonesia (인도네시아 주요 조림수종의 연소특성)

  • Park, Se-Hwi;Jang, Jae-Hyuk;Hidayat, Wahyu;Qi, Yue;Febrianto, Fauzi;Kim, Nam-Hun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.43 no.6
    • /
    • pp.768-776
    • /
    • 2015
  • This study was performed to understand combustion properties four major Indonesian wood species such as Albizia, Gmelina, Mangium and Mindi were investigated by cone-calorimeter for better utilization of theses wood species. Heat release rate (HRR), total heat release (TSR), specific mass loss rate (SMLR), effective heat of combustion (EHC), time to ignition (TTI), flame time (FT), specific extinction area (SEA), smoke production rate (SPR) and CO compound production rate were measured. HRR, THR and FT were proportional to the density of woods. Albizia showed the highest HRR, while Mindi had the lowest HRR. For SPR, Albizia showed the highest value due to its higher SEA. On the other hand, Mindi had the lowest SPR due to a lower SEA value. The highest smoke emission was for Albizia at the beginning of combustion. After 300 seconds, smoke emission of Gmleina and Mangium was increased greatly. Mangium and Mindi showed the highest total carbon dioxide emission. Expecially, Gmelina released the highest carbon monoxide during the combustion period and presented three times higher $CO/CO_2$ ratio than those of other species due to incomplete combustion.

The Effect of Foliage Clipping on the Growth and the Agronomic Characteristics, as Affected by its Time, Degree, and Nitrogen Top-Dressing, in Rice plants (절엽의 시기 및 정도, 그리고 절엽 후의 시비가 수도의 생육 및 수량제형질의 변화에 미치는 영향)

  • Eun-Woong Lee;Yong-Woong Kwon;Pyeong-Ki Yim
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.4 no.1
    • /
    • pp.81-91
    • /
    • 1968
  • To investigate the effects of foliage clipping time, degree, and nitrogen top-dressing after clipping on the growth and the agronomic characteristics, rice plants grown under ordinary cultural practices were clipped at the maximum tiller stage, 10 days prior to, and after that stage, respectively, with varying clipping, height, as 0, 1/3, 1/2, and 2/3 of plant height. And nitrogen was top-dressed at the rate of 0, 2, 4, 6 kg per 10 are immediately after clipping. The variety used was "Jinheung". The results obtained are outlined as follows: 1. Effect of clipping on the growth of rice plant: The subsequent growth was quite rapid during 10 days after clipping, and resulted, on the whole, in nearly complete recovery of defoliation by 20 days after clipping. a) Generally, the later the clipping time, the more growth accelerated. Rice plants clipped before the differentiation of ear primordia nearly recovered the damage, and in certain cases exceeded non-clipped plants in height. But the height of the rice plant clipped after the differentiation of ear primordia was somewhat smaller than that of non-clipped. b) Growth rate was rather rapid in the case of severe cutting, and the height of slightly clipped plants was taller than that of non-clipped plants. However, rice plants clipped to the extent of 2/3 of plant height did not fully recover the damage of defoliation compared to non-clipped plants. c) Nitrogen dressing was effective to rapid recovery of defoliation, the effect increasing with the increasing amount of application. d) Ear-heading was delayed in clipped plots, and this tendency was more apparent with later clipping time, more severe clipping, and increased amounts of nitrogen application after cutting. The range was 6 days at maximum. 2. Effect of defoliation on the yield and its components of rice plants: The yield response to clipping varied somewhat with its time, degree, and nitrogen application after cutting: yield increase of about 10% and decreasement of about 25% at maximum compared to the control plot. Grain yield of most plots was decreased. a) Clipping before the differentiation of ear primordia did not much affect the agronomic characteristics of rice plants. However, clipping after that growth stage decreased culm length, number of panicles, number of spikelets per panicle, and maturing rate of grain to some extent. Consequently this treatment resulted in decrease of about 10% in grain and straw production in spite of increase in panicle length and effective tillering rate. b) Slight, clipping decreased number of spikelets per panicle a little, and the yield of grain and straw by 4-5%, although effective tillering rate was somewhat increased. With severe clipping, panicle kngth, number of panicles, and number of spikelets per panicle decreased more, and the yield of grain and straw decreased about 10%. c) Nitrogen dressing after clipping at the rate of 2 kg per 10 are was effective in increasing grain yield. Nitrogen application over the rate of 4 kg per 10 are increased culm length, number of spikelets per panicle, and straw production, but this decreased the maturing rate, and the 1, 000-grains weight to some extent and resulted in decrease of grain yield.

  • PDF