• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.51-55
• /
• 1996

본 연구에서는 숫돌면의 직접관찰에 의해 적정한 드레싱 시기를 결정하는 것에 관한 연구를 수행했다. 이를 위해, 와전류센서를 숫돌주위에 설치하여 숫돌면의 눈막힘량을 비접촉식으로 직접 측정하므로서 숫돌의 상태를 검출했다. 숫돌의 재생작용에 의한 정상연삭과 눈막힘에 의한 이상연삭의 구분은 검출된 눈막힘량과 가공면 표면거칠기의 상관괘적(Relational Locus)을 통해 드레싱 시기를 결정했다. 또한 이때의 숫돌면의 상태를 레이져 변위센서를 이용해 측정하고 3차원 Topography로 표현했다. 본 논문에서는 이러한 내용들에 대한 실험적 결과들을 소개한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.477-481
• /
• 2002

Grinding which is the final finishing step in the machining processes plays an important role fur precision manufacturing because it directly affect the product quality. Since the ground surface is affected by the states of grains and voids on the grinding wheel surface, the wheel should be dressed before the machined surface deteriorates over a quality limit. This paper describes a systematic approach to decide a proper dressing chance. A fabricated eddy current sensor and CCD camera are used to measure the loading on the working wheel surface and to visualize the wheel surface states respectively. The dressing chance can be properly decided through the relation between the variation of the thresholding image of the wheel and the machined surface roughness as the variation of the eddy current sensor output is greater than the detected value previously.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.101-107
• /
• 1997

In general, grinding is one of the final machining processes which determines the surface quality of machined products. Since the ground surface is affected by the states of grains and voids on the grinding wheel surface, the wheel should be dressed before the machined surface deteriorates over a quality limit This paper describes a systematic approach to decide a proper dressing chance and an optimal dressing depth for the working grinding wheel. An eddy current sensor and a laser displacement sensor are used to measure the loading on the working wheel surface and the topography of the dressed wheel surface respec- tively. The dressing chance can be properly decided through the relational locus between the amount of handing and the machined surface roughness. An optimal dressing depth to guarantee the less wheel loss and the higher wheel surface quality is decided through the analysis of the variance of topography for the dressed wheel surface, which decreases at three different rates according to the accumulated dressing depth.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.112-118
• /
• 1998

In surface grinding, the contact between the grinding wheel and workpiece introduce heat and resistance, which restrict the self-dressing of the grits and result in burrs and cracks on the workpiece. Therefore, before or during the grinding operation, it is necessary to self-dress the grinding wheel for more accurate performance. In order to determine the dressing time monitoring method of grinding wheel in surface grinding, a three-dimensional computer simulation of the grinding operation has been attempted based on the contact mechanism and surface-shaping system between the grinding wheel and the workpiece. The optimal dressing time is determined based on the grain wear and work surface roughness.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.29-37
• /
• 2002

The wavelet transform is a popular tool for studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the diagnosis of grinding conditions in grinding process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. STD11 workpiece was 85 times of machined pieces cut by the WA wheel and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At dressing time, the approximation signals were slowly increased and 45 machined times noticed dressing time.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.160-165
• /
• 1999

In surface grinding, the conditions of the grinding wheel give a significant effect on the ground workpieces comparing with other metal removal provesses. In this paper, to assist the development, a non-contacting optical method by the laser beam is introduced. The in-process measurement of scattering intensities has been made during surface grinding processes and the surface textures of wheel working surfaces are captured. Also, in order to determine the dressing time monitoring method of a grinding wheel, a three-dimensional computer simulation of the grinding operation has been attempted based on the contact mechanism and the surface-shaping system between the grinding wheel and the workpiece. The optimal dressing time is determined by the amount of the grain wear and work surface roughness.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 춘계학술대회 논문집
• /
• pp.17-23
• /
• 1995

This paper describes investigation of the dressing time by laser in the surface grinding operation. Always dressing work is done before grinding operation. And then generates wear and roading on the wheel by contact between the grinding performance but also ground surfaces. On these states dressing work is needed. On this paper contour of the wheel by He-Ne laser is measured. It has also been found that the wheel deflection reduces the actual depth of cut and the roughness of the ground surface.