• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3158-3163
• /
• 2013

In this study, squeal noise test was conducted by using the lab-scaled brake dynamometer. Squeal conditions with respect to the angle of the brake pads ($34^{\circ}30^{\circ}26^{\circ}$) and negative slope, were studied. Squeal frequency of the In-plane-like mode was confirmed by hammering test and finite element analysis. This Squeal mode was difficult to control by the pad angle variation. Also the squeal sound was found to be periodic signal which has higher harmonic components. Squeal noise is independent of the negative slope. It implies that squeal noise can reach the stick-slip oscillation.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.125-128
• /
• 2007

In applying Numerov-Cooley method, Excel tool ‘Solver' is used to match those two wave functions propagated inward and outward, respectively. It is numerically confirmed that the same eigenvalue is obtained by using the average of two energy values of each inward and outward wave functions. This method is applied to a NO molecule potential, and we calculated the variations of the average bond distance and tunneling for a given vibrational energy. It is found that the average bond lengths increase proportionately to the vibrational energy, while the tunneling is not so sensitive to the energy changes. Rather substantial amount of tunnel effect is found for every vibrational state.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.65-70
• /
• 2006

A UHF band RFID passive tag antenna, which can be attached on metallic objects, is proposed. The proposed tag antenna is more insensitive to the size of the metallic object than conventional PIFAs or IFAs. It is constructed on a multi-layer and its size is reduced by using a 'L' slit. Performances of the antenna is analyzed by Ansoft's HFSS and measured using a back-scattering method. The simulated and measured data are obtained with varying the size of metallic object.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.2
• /
• pp.71-79
• /
• 1977

In order to obtain the basic information on the response of different day-length to heading date and on the inheritance of heading date of barley varieties. the 8 parents F$_1$ diallel crosses were tested with 4 different day-length. Varietal differences in photo-sensitivity were observed and Haganemugi was the most photo-insensitive variety. The inheritance of earliness were appeared to be partial dominance or partial ressesive and the inheritance of photo-insensitivity over photo-sensitivity were controlled by the single ressesive factor.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.5 no.1
• /
• pp.45-49
• /
• 1969

The photoperiod and temperature response of Korean varieties were studied under field and greenhouse conditions. Results of the experiment indicated that all varieties tested were relatively intensitive to photoperiod. The early varieties were least affected by photoperiod while the late varieties showed the greatest response. Low temperature delays flowering either under short daylength or natural daylength. In general, temperature has a greater effect than photoperiod on the growth duration of the varieties used. The late varties had longer photoperiod-sensitive phase than the early varieties. Temperature has very little effect on the photoperiod-sensitive phase. The basic vegetative phase is longer in the early varieties than the late varieties. High temperature results shorten duration of the basic vegetative phase.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.353-358
• /
• 1995

The impedance pneumography which is widely used in monitoring respiration is simple to use and noninvasive, but it is sensitive to motion artifacts and insensitive to detect obstructive apnea. A 3-channel respiratory inductive plethysmography (RIP) developed in this study detects inductance change of the inductance band induced by cross-sectional area change of thorax or abdomen as one breathes. It was confirmed that RIP was less sensitive to various motion artifacts but more sensitive to detection of obstructive apnea than impedance pneumography.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.80-88
• /
• 1999

This paper deals with the position determination problem of stereo camera systems used as a sensor for 3D robotic manipulation. Stereo cameras having parallel rays of sight and been set up on the same baseline are assumed. The distance between the sensor and the space measured is determined so as to get insensitive parameters to the uncertainty of control points used for calibration and to satisfy the error condition set by considering the repeatability of the robot. The baseline width is determined by minimizing the mutual effect of 3D positional error and stereo image coordinate error. Unlike existing techniques, the technique proposed here is developed without complicated constraints and modelling process of the object to be observed. Thus, the technique of this paper is more general and its effectiveness is proved by simulation.

• Science of Emotion and Sensibility
• /
• v.7 no.3
• /
• pp.27-35
• /
• 2004

This study has investigated a psychological status of optimal and pleasant driving condition by measuring various physiological signals using SCR(skin conductance response), PPG(peripheral plethysmograph), SKT(skin temperature) and HR(heart rate). The physiological response was measured during various simulated driving conditions. We developed a hardware and algorithm to measure and analyze the physiological response. The physiological signals has reflected the level of driver's tension or relaxation as well as the heart rate. The emotional responses of drivers were also measured and analyzed in this experiment. The result of the study can be used to design a system to enhance the driver's emotional satisfaction as well as to monitor the driver's safety and health condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.152-159
• /
• 2005

For high-speed data communication in band-limited channels, main of the bit error are fading and ISI(Inter-Symbol Interference). The common way of dealing with ISI is using equalization in the receiver. In this thesis, channel adaptive equalizer which uses Fuzzy Stochastic Gradient(FSG) and Constant Modulus Algorithm(CMA) is nonlinear equalizer, or Blind equalizer, that works directly on the signals with no training sequences required. This equalizer employs Takagi-Sugeno's fuzzy model that uses the FSG algorithm, to automatically regulate the step size of the descent gradient vector, combining fast convergence rate and low mean square error(MSE), and the CMA which is a special case of Godard's algorithm, to having multiple dispersion constants($R_p$).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.20-29
• /
• 2001

We recently developed a friability test procedure, which will be used as one of substance tests for Extremely Insensitive Detonating Substances(EIDSs) in Test Series 7 of the United Nations. This test was intended to assess the susceptibility of insensitive explosives to the break-up as high strain rate and subsequent ignition characteristics of the deformed material. We designed an air gun system using the hydro code simulation. The projectile velocities of the gun were in good agreement with those predicted by the hydro code with an inert material. Three different types of explosives, melt castable Comp B, castable plastic bonded explosives(PBXs), and pressable PBXs were tested during the development of the test procedure. Two tastable PBXs, i.e. DXD-09 and DXD-10, which are currently under development as candidate formulations of EIDS were classified as EIDS, since test results with these formulations were far better than the criterion of the UN Test Series 7.