• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.66-67
• /
• 2016

본 논문에서는 정지영상에 주로 적용되어 왔던 히스토그램 등화 (histogram equalization) 기법을 실시간 동영상 화질향상에 이용할 수 있도록 확장한다. 우선, 동영상의 히스토그램 등화를 실시간으로 동작하기 위한 방안으로, 이전 프레임들의 히스토그램을 이용하여 현재 프레임의 변환 함수를 구성하는 방법을 제안한다. 또한 페이드-인 (fade-in) 등과 같이 장면 전환을 위한 특수 효과를 적용한 동영상이나 장면의 특성상 낮은 화소값이나 높은 화소값들만으로 구성된 동영상에 대해 히스토그램 등화를 적용할 경우 발생하는 문제점을 극복하기 위한 방법을 제시한다. 따라서 제안하는 알고리듬을 적용하여 동영상의 히스토그램 등화를 수행하면 실시간 동영상 처리가 가능할 뿐만 아니라, 다양한 특수 기법들을 사용한 동영상을 효과적으로 개선하여 향상된 화질의 동영상을 얻을 수 있다.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.1
• /
• pp.23-34
• /
• 2016

Tsogttsetsii area, an intrusive complex associated with Cu porphyry mineralization, is located in the Gurvansaikhan island arc terrane of the Central Asian Orogenic belt, Southern Mongolia. We performed a reconnaissance survey in Tsogttsetsii area. Cu mineralization in Tsogttsetsii area is porphyry Cu type related with alkali granite intruded in Permian. Mineralogical and textural properties of the ores and associated minerals were analyzed using X-ray diffraction, thin section petrography, and Scanning electron microscopy-Energy dispersive spectroscopy (SEM-EDS). Ore minerals identified in polarizing microscope are magnetite, pyrite and bornite. Propylitic alteration zone occurs broadly in the area where malachite occurrences are shown to be spread intensively in alkali granite area. Quartz, sericite, chlorite and epidote were observed in the alteration zone samples. As results of XRD and SEM-EDS analysis, samples of copper oxides were composed mainly of malachite, cuprite and small amounts of quartz. Average and maximum Cu contents of samples collected from malachite occurrences area are 759 ppm and 6190 ppm, respectively. The characteristics of mineralization in Tsogttsetsii area is similar to Oyu Tolgoi Cu-Au (Mo) deposit and Tsagaan Suvarga Cu-Mo deposit which are 56 km south and 120 km northeast from Tsogttsetsii area, respectively. Characteristics of the study area, such as the geology, tectonic environment, lithology, mineralization, and alterations of the rocks within the survey area, resemble the characteristics of other porphyry deposits. Therefore further exploration including Induced Polarization (IP) survey for identifying subsurface orebody is required.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2006.06a
• /
• pp.322-325
• /
• 2006

그룹 키 동의 프로토콜에 관한 연구는 그동안 많은 연구자들에 의해 다양한 관점에서 진행되어왔으며, 최근 Nam 등이 유 무선 통합 네트워크 환경에서 효율적이면서도 안전한 그룹 키 동의 프로토콜을 제안하였다. 유 무선 통합 네트워크 환경에 적합한 그룹 키 동의 프로토콜을 설계하기 위해서는 고성능 연산 능력을 가진 유선 단말기의 특성과 상대적으로 계산능력이 떨어지는 무선 단말기의 특성이 함께 고려되어야 한다. 특히, 시스템자원의 제한성을 갖는 무선 단말기에서의 계산량을 최소화하는 문제는 그룹 키 동의 프로토콜 설계에 있어서 무엇보다 중요하다. 따라서, 본 논문에서는 무선 단말기의 계산량을 최소화하면서 유 무선 통합 네트워크 환경에 적합한 효율적인 그룹 키 동의 프로토콜을 제안하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.68-75
• /
• 2005

The effects of the physical properties of primary flow on the performance of a supersonic ejector were investigated. Axisymmetric annular injection type supersonic ejector was used for the study of the effects of molecular weight and the specific heat at constant pressure on the ejection performance. Test gases include; air, $CO_{2}$, Ar, $C_{3}H_{8}$, and $CCl_{2}F_{2}$ for different values of gas properties. As the molecular weight and CP of the primary gas increase, the secondary flow pressure increases at the same primary stagnation pressure and this behavior results from the combined effects of molar specific heat or specific heat ratio.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.293-300
• /
• 2015

In this study, a series of forced vibration testing and ambient vibration measurement were performed at a lowrise masonry-infilled reinforced concrete frame structure before and after seismic retrofit and its dynamic properties were extracted using system identification techniques. Also, analytical models which show similar dynamic properties to the measures ones were constructed. The system identification results showed that damping ratios in x direction along which the dampers were installed has been increased. From the comparison between the analytical models, the effective stiffness of post-installed member and post-reinforced members(shear walls and damper frames) were only 50% of gross sectional stiffness of the members, which indicates that the these members were not fully integrated with the existing structure or members. In addition, support condition of post-installed footing has to be pinned in y direction to match the dynamic properties, which is seemingly caused by the change of fixity of the soil due to the installation of new footing.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.83-91
• /
• 2009

This paper concerns the dynamic property of TVC system in the upper stage of KSLV-I. The minimum bandwidth of TVC system is predicted by gathering and comparing the dynamic test data through whole development phases of KSLV-I. The linear models which approximate the dynamic data are also suggested. It is shown that the minimum bandwidth of KSLV-I TVC system is guaranteed over 6.0 Hz at one degree command. It is also shown that the linear model of KSLV-I TVC dynamics takes the form of the transfer function with an 8-th order denominator and a 2-nd order numerator. These results will play an important role in analyzing the flight stability and performance of KSLV-I.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.97-108
• /
• 2012

Dynamic responses were measured using long-term monitoring system for Uldolmok tidal current pilot power plant which is one of jacket-type offshore structures. Among the dynamic quantities, the tilt angle was chosen because the low frequency response components can be precisely measured by dynamic tiltmeter, and the natural frequencies and modal damping ratio were successfully identified using proposed LS-FDD (least squared frequency domain decomposition) method. And the effects of tidal height and tidal current velocity on the variation of natural frequencies and modal damping ratios were investigated in time and frequency domain. Also the non-parametric models were tested to model the relationship between tidal conditions and modal properties such as natural frequencies and damping ratios.

• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.359-370
• /
• 1990

This study concerns with comparing low-dimensional reactor kinetics methods with a three-dimensional kinetics method to be used for safety analysis of light water reactors in order to suggest means of preparing input parameters required for low-dimensional methods. For this purpose a one-dimensional finite difference two-group diffusion theory code ODTRAN and a third-order Hermit polynomial-based point kinetics code POTRAN are developed and used to obtain low-dimensional solutions to the LRA-BWR kinetics benchmark problem. The results are compared with a three-dimensional modified Borresen's coarse-mesh solution of the kinetics problem by CMSNACK code. Through this comparison some simple but practical means of preparing input parameters of low-dimensional kinetics analysis methods are suggested.

• Journal of Aerospace System Engineering
• /
• v.11 no.6
• /
• pp.84-91
• /
• 2017

The dynamic characteristics of a ducted fan in hovering condition were investigated. The section properties of the fan blade were calculated, and a simulation model was developed according to the rotor system components. Dynamic analyses were conducted relative to the rotational speed and the collective pitch. The proposed ducted fan system showed less aero-elastic instability within the designated operating ranges. To verify the analytical approach, a rotating test stand of the ducted fan was set up. A functional test of the assembly was carried out to determine the kinematics and interference between components. The non-rotating and rotating normal frequencies were measured by excitation of the collective pitch using hydraulic actuators. The results indicated a correlation between the test equipment and the simulation model.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.94-104
• /
• 2016

In this study, factor and cluster analysis are used to classify characteristics of the administrative basic unit, "Dong", of the Incheon Metropolitan City. Travel characteristics of the classified groups are then analyzed through databases to provide directions of urban transportation planning. First, industrially developed administrative-dong show a high commuting volume by using cars. Thus the analysis indicated the need to staggering work-hour system and signal operating system policy. Second, commercially developed administrative-dong show heavy use of public transportation and long distance commute as well as high volume of shoppers. The analysis indicated the need to improve road infrastructure. Third, densely populated administrative-dong show a high rate of commute to work and school as well as long hours of commuting. Thus the analysis indicated the need to improve road transportation policies during rush hours. Fourth, administrative-dong with multiple characteristics feature heavy pedestrian traffic thus the study analyzed the need to improve pedestrian environment policies. Lastly, administrative-dong in close proximity to train stations feature extensive use of biking as well as high volume of shoppers and students commuting. Thus the study analyzed the necessity to have plans to enhance accessibility.