• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.286-286
• /
• 2020

인공함양은 대수층함양관리 중 하나의 기법이며 하수처리장 방류수의 영향을 직·간접적으로 받은 물을 지하대수층에 함양하여 수질의 향상을 기대할 수 있다. 그러나 방류수의 영향으로 인해 다수의 미량유해물질들이 대수층으로 유입됨에 따라 함양 후 회수할 때 이들의 검출이 빈번해졌다. 이에 따라 이 미량유해물질의 제거를 위해 인공함양의 후속 공정으로 나노막 여과를 고려하여 인공함양과 나노막 공정을 통하여 미량유해물질의 거동을 파악하고자 하였다. 본 연구에서는 인공함양 지하저수지 모사 컬럼을 설계하여 실험하였다. 서울특별시 탄천 하류에서 샘플링한 물을 원수로 사용하였으며 인공함양에 앞서 염소, 과망간산염, 오존의 3종류 산화 전처리를 통하여 그 영향을 확인하고자 하였다. 함양기간은 2.5일이었으며 함양 후 나노막 장치를 통하여 최종 유출수를 획득하였다. 인공함양 결과 용존유기물은 45%~63% 수준에서 제거가 되어 인공함양시 용존유기물의 제거가 가능함을 확인하였다. 산화 전처리에 따른 동화가능유기탄소의 증가로 인하여 생분해가 주요 기작인 인공함양 처리를 통하여 동화가능유기탄소의 제거율이 유기용존탄소의 제거율에 직접적으로 영향을 주었음을 알 수 있었다. 미량유해물질로 알려진 과불화화합물의 경우 산화 전처리에 따른 제거는 관찰되지 않았으며 잔류의약물질의 경우 대상 물질의 물리·화학적 특성에 따라 산화시 제거가 가능함을 확인하였다. Iopromide와 같은 조영제의 경우 오존 산화를 통하여 98% 이상 제거되어 산화를 통한 제거가 가능함을 확인하였다. 인공함양시 과불화화합물은 분자량이 큰 PFNA, PFDA, PFOS 등이 제거되었으며 그 제거율은 각각 최대 >99%까지 도달하였다. 분자량이 작은 과불화화합물의 경우 인공함양을 통과하는 경향을 보였다. 잔류의약물질의 경우 생분해가 용이한 물질은 제거가 됨을 확인하였으며 carbamazepine 등 제거가 안 되는 물질은 제거율이 18% 미만으로 확인하였다. 나노막 여과 결과 과불화화합물이 최대 >99%까지 제거됨을 확인하였으며 미량유해물질의 경우에도 대부분의 물질이 제거됨을 확인하였다.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.2
• /
• pp.159-168
• /
• 2018

Climate change is believed to increase the amount of dissolved organic matter in surface water, as a result of the release of bulk organic matter, which make difficult to achieve a high quality of drinking water via conventional water treatment techniques. Therefore, the natural water treatment techniques, such as managed aquifer recharge (MAR), can be proposed as a alternative method to improve water quality greatly. Removal of bulk organic matter using managed aquifer recharge system is mainly achieved by biodegradation. Biodegradable dissolved organic carbon (BDOC) and assimilable organic carbon (AOC) can be used as water quality indicators for biological stability of drinking water. In this study, we compared the change of BDOC and AOC with respect to pretreatment methods (i.e., ozone or peroxone). The oxidative pretreatment can transform the recalcitrant organic matter into readily biodegradable one (i.e., BDOC and AOC). We also investigated the differences of organic matter characteristics between BDOC and AOC. We observed the decreases in dissolved organic carbon (DOC) and the tryptophan-like fluorescence intensities. Liquid chromatographic - organic carbon detection (LC-OCD) analysis also showed the reduction of the low molecular weight (LMW) fraction (15% removed, less than 500 Da), which is known to be easily biodegradable, and the biopolymers, high molecular weight fractions (66%). Therefore, BDOC consists of a broad range of organic matter characteristics with respect to molecular weight. In AOC, low molecular weight organic matter and biopolymers fraction was reduced by 11 and 6%, respectively. It confirmed that biodegradation by microorganisms as the main removal mechanism in AOC, while BDOC has biodegradation by microorganism as well as the sorption effects from the sand. $O_3$ and $O_3+H_2O_2$ were compared with respect to biological stability and dissolved organic matter characteristics. BDOC and AOC were determined to be about 1.9 times for $O_3$ and about 1.4 times for $O_3+H_2O_2$. It was confirmed that $O_3$ enhanced the biodegradability by increasing LMW dissolved organic matter.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.767-777
• /
• 2012

Annular Biofilm Reactor (ABR) equipped with coupons of three different pipe materials (STS 304, PVC, PE) was used to generate drinking water biofilm samples. The level of assimilable organic carbon (AOC) during the sample generation period was $37.3{\mu}g/L$, and this level did not seem to be low enough to limit the formation of biofilm in this study. Terminal-restriction fragment length polymorphism (T-RFLP) analyses determined T-RF profile as early as 3 h of exposure on PVC coupons. Average surface roughness ($R_a$) measured by atomic force microscopic analyses was 125.7 nm for PVC, and this value was higher than for STS (71.6 nm) and PE (74.0 nm). However, biofilm formation was faster on STS (6 h) than on PE (12 h), which indicated that surface roughness might not be the only factor that controlled the initiation of biofilm development. Upon detection of the T-RF peaks, richness (S) and diversity indices such as Shannon (H) and Simpson (1/D) demonstrated a rather slow increase until 48 h followed by rapid increase regardless of the pipe materials. Differences of microbial community structures among the biofilm samples were determined based on the cluster analysis using Jaccard coefficients (Sj). Biofilm communities could be divided into two distinct groups according to the exposure time regardless of the pipe materials. First group contained a young (< 48 h) biofilm samples (10 out of 11) but second group contained a mature (${\geq}$ 48 h) samples (11 out of 14). Results suggested that, due to the complexity of biofilm, the targeting of the first group of cluster was crucial for optimizing the management of drinking water distribution systems and controlling microbial growth.

• Journal of Life Science
• /
• v.10 no.1
• /
• pp.14-21
• /
• 2000

The experiments were performed using both batch and continuous column reactors. Batch biodegradation studies were performed under aerobic conditions to determine the biodegradable fraction of the natural organic matter (NOM) source. NOM source was evaluated for its biodegradability at three different UV irradiation conditions and compared to its biodegradability without UV irradiation. In continuous experiments, system operating parameters of empty bed contact time (EBCT), recycle ratio, and influent concentration affected the extent of biofiltration in the biofilters. The effluent UV254/DOC ratios fro the biologically active columns were consistently lower than the influent values, which indicated that the dissolved organic carbon (DOC) removed by biodegradation was not a significant part of the UV-absorbable material. The increase in UV254/DOC ratio was caused by the DOC decrease across the biofilter because there was essentially no difference between the feed and effluent UV254 absorbance values over time. The results of this research showed that biofiltration was an effective method for removing the biodegradable fraction of NOM from water supplies.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1311-1320
• /
• 2005

The purpose of this research is to survey characteristics of microbial community and the removal efficiency of organic materials for biological activated carbon in water treatment plant. Coal based activated carbon retained more attached bacterial biomass on the surface of the activated carbon than the other activated carbon with operating time and materials. The heterotrophic plate count(HPC), eubacteria(EUB) and 4,6-diamidino-2-phenylindole(DAPI) counts were ranged from $0.95{\times}10^7$ to $52.4{\times}10^7$ CFU/g, from $3.8{\times}10^8$ to $134.2{\times}10^8$ cells/g and from $7.0{\times}10^8$ to $250.2{\times}10^8$ cells/g, respectively. The biomass of EUB and DAPI appeared to be much more $10^2$ than HPC, which were increasing in bed volume of 20,000 at the stage of steady-state. The change of microbial community by analyzing fluorescent in situ hybridization(FISH) method with rRNA-targeted oligonucleotide probes, the dominant group was $\alpha$-proteobacteria($\alpha$ group) and high G+C content bacteria(HGC) the lowest distributing rate before reaching the bed volume of 20,000. After reaching the bed volume of 20,000, $\alpha$ group and other groups of bacteria became decreased, on the other hand, the proportion of both $\beta$-proteobacteria($\beta$ group) and $\gamma$-proteobacteri($\gamma$ group) were increasing. Coconut and wood based activated carbons had similar trend with coal based activated carbon, but the rate of $\alpha$ group on coal based activated carbon had gradually increased. Bacterial production with the operating period appeared highest in coal based activated carbon at the range of $1.2{\sim}3.4\;mg-C/m^3{\cdot}h$ while the coconut and wood based activated carbon were ranged from 1.1 to 2.6 $mg-C/m^3{\cdot}h$ and from 0.7 to 3.5 $mg-C/m^3{\cdot}h$ respectively. The removal efficiency of assimilable organic carbon(AOC) showed to be highly correlated with bacterial production. The correlation coefficient between removal efficiency of AOC and bacterial production were 0.679 at wood based activated carbon, 0.291 at coconut based activated carbon and 0.762 at coal based activated carbon, respectively.