• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.880-894
• /
• 1997

In this paper,we propose a new algorithm to perform DCT(Discrete Cosine Transform) withn the area reduced by prdeicting position of quantization coefficients to be zero.This proposed algorithm not only decreases the enoding time and the decoding time by reducing computation amount of FDCT(Forward DCT)and IDCT(Inverse DCT) but also increases comprossion ratio by performing each diffirent horizontal- vereical zig-zag scan assording to the calssified block size for each block on the huffiman coeing.Traditional image coding method performs the samd DCT computation and zig-zag scan over all blocks,however this proposed algorthm reduces FDCT computation time by setting to zero insted of computing DCT for quantization codfficients outside classfified block size on the encoding.Also,the algorithm reduces IDCT computation the by performing IDCT for only dequantization coefficients within calssified block size on the decoding.In addition, the algorithm reduces Run-Length by carrying out horizontal-vertical zig-zag scan approriate to the slassified block chraateristics,thus providing the improverment of the compression ratio,On the on ther hand,this proposed algorithm can be applied to 16*16 block processing in which the compression ratio and the image resolution are optimal but the encoding time and the decoding time take long.Also,the algorithm can be extended to motion image coding requirng real time processing.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.121-128
• /
• 2020

The purpose of this study is to investigate the distribution patterns of displacement and acceleration fields in a nonlinear soil ground based on the interaction of high-speed train, wheel, rail, and ground. For this purpose, a high-speed train in motion was modeled as the actual wheel, and the vertical contact of wheel and rail and the lateral contact, caused by meandering motion, were simulated; this simulation was based on the moving mass analysis. The soil ground part was given the nonlinear behavior of the upper ground part by using the modified the Drucker-Prager model, and the changes in displacement and acceleration were compared with the behavior of the elastic and inelastic grounds. Using this analysis, the displacement and acceleration ranges close to the actual ground behavior were addressed. Additionally, the von-Mises stress and equivalent plastic strain at the ground were examined. Further, the equivalent plastic and total volumetric strains at each failure surface were examined. The variation in stresses, such as vertical stress, transverse pressure, and longitudinal restraint pressure of wheel-rail contact, with the time history was investigated using moving mass. In the case of nonlinear ground model, the displacement difference obtained based on the train travel is not large when compared to that of the elastic ground model, while the acceleration is caused to generate a large decrease.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.66-73
• /
• 2008

Response surface methodology (RSM) was applied for monitor the yields of desirable substances from fig (Ficus carica L) under different extraction conditions. The maximum yield was 66.46% at 22.08 mL/g of solvent to sample ratio, $90.59^{\circ}C$ extraction temperature and 148.04 min extraction time. The maximum total phenolics was $121.31{\mu}g/mL$ at 17.87 mL/g, $98.82^{\circ}C$, and 130.80 min. The maximum electron donating ability was 54.09% at $121.31{\mu}g/mL$, 18.13 mL/g, and $98.81^{\circ}C$. The maximum value of protease activity was 54.51 unit/min at 17.45 mL/g, $99.01^{\circ}C$, and 131.43 min. In addition, the maximum value of reducing sugar content was 19.14 mg/mL in 22.66 mL/g, $86.30^{\circ}C$, and 153.59 min. The optimum conditions estimated by RSM for maximal extraction of the effective components were $17{\sim}25$ mL/g of solvent to sample ratio, $80{\sim}100^{\circ}C$ of extraction temperature, and $100{\sim}170$ min of extraction time.

• Korean Journal of Food Science and Technology
• /
• v.45 no.1
• /
• pp.13-19
• /
• 2013

This study was carried out to find the optimal conditions for red cabbage seed sprouts in terms of their physicochemical and sensory qualities by electron-beam irradiation, cultivation and storage using the response surface methodology (RSM). Moisture content ($R^2$=0.9638) was affected by irradiation dose and cultivation time. Total phenolics content ($R^2$=0.9117) was mainly affected by irradiation dose, but carotenoid content ($R^2$=0.8338) was affected in the order of irradiation dose, cultivation time and storage time. Sensory properties were also affected by irradiation dose, and thus scores decreased as irradiation dose increased. The optimum conditions estimated by superimposing total phenolics content and overall acceptance were 2.2-3.8 kGy of the irradiation dose, 3.0-4.0 days of cultivation and 2.0-3.0 days of storage.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.2
• /
• pp.62-72
• /
• 2019

Due to the difficulties in forecasting the intensity and the source location of tsunami the countermeasures prepared based on the deterministic approach fail to work properly. Thus, there is an increasing demand of the tsunami hazard analyses that consider the uncertainties of tsunami behavior in probabilistic approach. In this paper a fundamental study is conducted to perform the probabilistic tsunami hazard analysis (PTHA) for the tsunamis that caused the disaster to the east coast of Korea. A logic tree approach is employed to consider the uncertainties of the initial free surface displacement and the tsunami height distribution along the coast. The branches of the logic tree are constructed by reflecting characteristics of tsunamis that have attacked the east coast of Korea. The computational time is nonlinearly increasing if the number of branches increases in the process of extracting the fractile curves. Thus, an improved method valid even for the case of a huge number of branches is proposed to save the computational time. The performance of the discrete weight distribution method proposed first in this study is compared with those of the conventional sorting method and the Monte Carlo method. The present method is comparable to the conventional methods in its accuracy, and is efficient in the sense of computational time when compared with the conventional sorting method. The Monte Carlo method, however, is more efficient than the other two methods if the number of branches and the number of fault segments increase significantly.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.1
• /
• pp.61-70
• /
• 2011

The impact protection system consists of an arrangement of circular sheet pile cofferdams-denoted dolphin structuredeeply embedded in the seabed, filled with crushed rock and closed at the top with a robust concrete cap. Centrifuge model tests were performed to investigation the behaviors of dolphins in this study. Total 7 quasi-model tests and 11 dynamic model tests were performed. The main experimental results can be summarized as follows. Firstly, The experimental force-displacement results for quasi-static tests show a limited influence on the initial stiffness of the structure from the change in fill density and the related change in the stiffness of the fill. And by comparing the dissipation at the same dolphin displacement it was found that the denser fill increase the dissipation by 16% for the 20m dolphin and by 23% for the 30m dolphin. The larger sensitivity for the large dolphin is explained by a larger contribution to the dissipation from strain in the fill. In low level impacts the dynamic force-response is up to 26~58% larger than the quasi-static and the dissipation response is showed larger in small displacement. Hence, it is concluded conservative to use the quasi-static response characteristics in the approximation of the response, and it is further concluded that the dolphin resistance to low level impacts is demonstrated to be equivalent and even superior to the high level impacts.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.165-175
• /
• 2022

Earthquakes have occurred owing to movements on a fault since several billion years ago. Research on the relationship between earthquakes and groundwater began in the 1960s in the United States, but related works, including hydrogeochemistry research, only began in the 2010s in South Korea. In this study, domestic studies on the relationship between earthquakes and groundwater until 2021 were collected from the Web of Science and characterized by subject area (groundwater level, hydrogeochemistry, combination of the two, and others). The results showed that the number of published articles per year was positively correlated with the 2011 Tohoku earthquake, 2016 Gyeongju earthquake, and 2017 Pohang earthquake, with the maximum numbers observed in 2011, 2018, 2019, and 2020. Most studies on the relationship between earthquakes and groundwater level addressed groundwater level fluctuations in the duration of the subject earthquake, with little consideration of the precursors. Groundwater level monitoring data, as well as hydrogeochemical information and microbial communities, may contribute to a more detailed understanding of groundwater flow and chemical reactions in bedrock caused by earthquakes. Therefore, the establishment of a national groundwater monitoring network for seismic monitoring and prediction is required.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.148-163
• /
• 2021

The diversification of the New Deal urban regeneration projects, that started in 2017 in accordance with the "Special Act on Urban Regeneration Activation and Support", generated the increased demand for the accuracy of data-driven diagnosis and project type forecast. Thus, this research was conducted to develop an application model able to identify the most appropriate New Deal project type for "eup", "myeon" and "dong" across the country. Data for application model development were collected through Statistical geographic information service(SGIS) and the 'Urban Regeneration Comprehensive Information Open System' of the Urban Regeneration Information System, and data for the analysis model was constructed through data pre-processing. Four models were derived and simulations were performed through polynomial regression analysis and multinomial logistic regression analysis for the application of the appropriate New Deal project type. I verified the applicability and validity of the four models by the comparative analysis of spatial distribution of the previously selected New Deal projects by targeting the sites located in Seoul by each model and the result showed that the DI-54 model had the highest concordance rate.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.231-240
• /
• 1997

In the United States, a number of ocean outfalls discharge primary treated effluent into deep sea water and contribute for more efficient wastewater treatment. The long multiport diffuser connected by long pipe from a treatment plant discharge wastewater into deep water due to the steep slope of the sea bed. However, Plume discharged from the diffuser can have significant impacts on coastal communities and possibly immediate consequence on public health. Therefore, there have been growing interests about the dynamics of plume in the vicinity of the ocean outfalls. It is expected that the ocean outfall should be considered for more efficient and reliable wastewater treatments as soon as possible around coastal area in South Korea. A number of studies of plume ynamics have used various models to predict plume behavior. However, in many cases, the calculated values of plume behavior are in significantly poor agreement with realistic values. Therefore, in this study, it is recommended that improvements should be made in the application of the plume model to more simulate the actual discharge characteristics and ocean conditions. It should be noted that input parameters in plume models reflect realistic ocean conditions like waves as well as currents. In this study, as one of the new parameters, current and long wave-influenced plume rise and initial dilution have been taken into account by using simple linear wave theory under some specific assumptions for more reliable plume behavior description. Among the improved plume models approved by EPA (Environmental Protection Agency), the RSB(Roberts-Snyder-Baurngartner) and UM(Updated Merge) models were chosen for the calculation of plume behavior, and the variation calculated by both models on the basis of long period wave was compared in terms of plume rise and initial dilution.

• Economic and Environmental Geology
• /
• v.48 no.1
• /
• pp.25-39
• /
• 2015

$CO_2$ geological storage plays an important role in reduction of greenhouse gas emissions, but there is a lack of research for CCS demonstration. To achieve the goal of CCS, storing $CO_2$ safely and permanently in underground geological formations, it is essential to understand the characteristics of them, such as total storage capacity, stability, etc. and establish an injection strategy. We perform the impedance inversion for the seismic data acquired from the Ulleung Basin in 2012. To review the possibility of $CO_2$ storage, we also construct porosity models and extract attributes of the prospects from the seismic data. To improve the quality of seismic data, amplitude preserved processing methods, SWD(Shallow Water Demultiple), SRME(Surface Related Multiple Elimination) and Radon Demultiple, are applied. Three well log data are also analysed, and the log correlations of each well are 0.648, 0.574 and 0.342, respectively. All wells are used in building the low-frequency model to generate more robust initial model. Simultaneous pre-stack inversion is performed on all of the 2D profiles and inverted P-impedance, S-impedance and Vp/Vs ratio are generated from the inversion process. With the porosity profiles generated from the seismic inversion process, the porous and non-porous zones can be identified for the purpose of the $CO_2$ sequestration initiative. More detailed characterization of the geological storage and the simulation of $CO_2$ migration might be an essential for the CCS demonstration.