• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.1033-1041
• /
• 2011

In this paper, a collision avoidance maneuver frequency for the KOMPSAT-2 and the KOMPSAT-5 is analyzed. For the statistical prediction of the avoidance maneuver frequency, mission orbits, responsive time, accepted collision probabilities, and positional uncertainties of primary and secondary objects are considered. In addition, the collision avoidance maneuver frequency of the KOMPSAT-2 is compared to the case that NORAD catalog during one year is used to calculate that of the KOMPSAT-2. As a result, the collision avoidance maneuver frequency is one per year on average and effective factors on the statistical prediction of the avoidance maneuver frequency are investigated. Efforts to improve its prediction accuracy are also discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.3
• /
• pp.54-61
• /
• 1998

This paper presents a prediction method of natural frequencies of vertical hull girder vibration based on design sensitivity analysis in case of design modification and the variation of loading condition. The resented method premises the vibration analysis by the transfer matrix method. Governing sensitivity equation is derived from the direct differentiation of state vector and transfer matrix to parameters and its transfer over all the hull girder elements. Derivatives of natural frequencies and mode shapes are determined by two trial calculation of the governing equation. Using the derivatives, the changes of natural frequencies and mode shapes can be predicted when mass and stiffness parameter's are changed. As results, it is possible to optimize ship structure as well as to avoid troublesome calculation in hull girder vibration analysis rationally and efficiently. To verify the accuracy and efficiency of the resented method numerical results obtained by both the sensitivity analysis and the ordinary reanalysis far a real ore/bulk carrier in case of the change of mass and stiffness parameters are compared.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1181-1187
• /
• 2012

For the fatigue design of aircraft landing gear, the safe-life approach is applied. Structural defects such as cracks or detrimental deformations should not occur under the fatigue load spectrum depicting the entire lifetime usage of the aircraft. In the design phase, the fatigue life of the landing gear is estimated analytically by adopting the stress-based approach because the fatigue of aircraft landing gear is generally high-cycle fatigue. This utilizes S-N curves that are factored to produce design curves that account for the scatter and surface finish of the material. In the test and evaluation phases, a fatigue test should be conducted for full-scale landing gear to substantiate the fatigue design requirement in the end. In this study, the procedure for the fatigue test and evaluation of aircraft landing gear is presented with real application cases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05b
• /
• pp.69-73
• /
• 2005

ACSR전력선의 송전용량 증가를 위해 개발된 중용량저이도 송전선인 STACIR/AW(Super Thermal-resistant Aluminum alloy Conductors, aluminum-clad Invar-Reinforced)전선은 초내열 Al도체 및 인바강선의 사용으로 비교적 고온에서의 안정적 운전이 가능하다. 그러나 고온 환경에서 장시간 노출된 STAClR/AW전선의 안정적 관리를 위해서는, 열화 된 STACIR/AW 전선의 인장강도, 각 구성소재의 탄성계수, 비틀림 계수 등과 같은 기계적 물성이 장기 운전 모의를 위해 선정된 열화온도, 열화시간 등에 대해 종합적으로 평가될 필요가 있다. 또한 크립 등과 같이 고온응력 부하상태에서의 변형거동과 탄성계수 및 선팽창계수의 온도의존성 등은 전선의 이도관리와 예측을 위해서도 명확히 규명되어야할 중요한 관리 인자이다. 그러나 현재까지는 이들에 대해 수행한 어떠한 연구결과들도 보고 되어 있지 않은 실정이다. 본 연구에서는 STACIR/AW $410mm^2$ 송전선을 장시간 운전의 모의를 위해 가속열화 시키고 가속열화에 따른 STACIR/AW 전선 및 그 구성소재의 강도, 비틀림 특성의 변화를 조사하여 장시간 운전에 따른 STACIR/AW전선의 안정성을 평가하여 보고하고자 하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.195-200
• /
• 2008

To compress the moving picture data effectively, it is needed to reduce spatial and temporal redundancy of input image data. While motion estimation! compensation methods is effectively able to reduce temporal redundancy but it is increased computation complexity because of the prediction between frames. So, the study of algorithm for computation reduction and real time processing is needed. This paper is presenting quantizer effectively able to quantize DCT coefficient considering the human visual sensitivity. As quantizer that proposed DCT-based H.263 could make transmit more frame than TMN5 at a same transfer speed, and it could decrease the frame drop effect. And the luminance signal appeared the difference of $-0.3{\sim}+0.65dB$ in the average PSNR for the estimation of objective image quality and the chrominance signal appeared the improvement in about 1.73dB in comparision with TMN5. The proposed method reduces $30{\sim}31%$ compared with NTSS and $20{\sim}21%$ compared to 4SS in comparition of calculation quantity.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.33-42
• /
• 2003

This paper deals with the FEM analysis of nonlinear sloshing of incompressible, invicid and irrotational flow in two dimensional rectangular tank. We use laplace equation based on potential theory as governing equation. For large amplitude sloshing motion, kinematic and dynamic free surface conditions derived from Bernoulli equation are applied. This problem is solved by FEM using 9-node elements. For the time integration and accurate velocity calculation, we introduce predictor-corrector time marching scheme and least square method. Also, numerical stability in tracking of free surface is obtained by direct calculation of free surface location to time variation. Numerical results of sloshing induced by harmonic excitations, while comparing with those of linear theory and references, prove the accuracy and stability. After verification of our program, we analyze sloshing response characteristics to the fluid height and the excitation amplitude.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.207-214
• /
• 2008

We conducted uniaxial consolidation tests in mudstone samples with different clay content, in order to investigate time-dependent deformation and its characteristics. A significant amount of time-dependent strain was observed at a constant stress level immediately after a jump of stress was applied. For a given mudstone, the amount of time-dependent deformation was nearly proportional to the increment of stress, suggesting a linear viscous rheology. The amount of time-dependent strain increases with clay content, implying that clay plays an important role in creep of the unconsolidated mudstone. A power-law model was suitably applied to our results, suggesting that a short-term prediction of time-dependent deformation of the mudstone is tentatively feasible.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.9-18
• /
• 2016

In this research, the modeling of erosive burning and analysis of effective parameters were carried out for the application of fluid-structure integration analysis. The manufacture, test, and analysis of erosive burning motors were carried out to estimate the erosive burning applying Lenoir & Robillard model considering effective parameters. The erosive burning phenomenon was detected from experimental results. Erosive burning model and its effective parameters were evaluated and analyzed considering existence of aluminum in propellant, relationship among erosive burning coefficients according to characteristic length, effect of grain initial temperature. The erosive burning model was applied to the fluid-structure integration analysis, and the estimated results were close to the experimental results.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.89-96
• /
• 2023

The Wiener-type nonlinear model where a static nonlinear block follows a dynamic linear block is widely used to describe the dynamics of chemical processes. A long process excitation step is typically needed to identify this Wiener-type nonlinear model with two blocks. In order to cope with this disadvantage, an identification method for the Wiener-type nonlinear model that uses only a single-step response is proposed here. The proposed method estimates the response of the dynamic linear sub-block from the initial part of the step response, and then the static nonlinear sub-block is identified. Because the only single-step response is used to identify the Wiener-type nonlinear model, there is great benefit in time and cost for obtaining process response. The performance of the proposed identification method with the single-step response is verified through a representative Wiener-type nonlinear process, a pH titration process, and a liquid level system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.349-349
• /
• 2020

기후변화로 인한 돌발홍수와 같은 집중적인 강우현상은 노후화된 제방의 안정성 저하 및 붕괴 등을 야기시킨다. 향후 홍수량이 증가함에 따라 하천의 통수면적이 부족하여 침수 및 범람의 위험성이 증가할 것으로 생각된다. 계획규모 이상의 홍수가 발생하여 홍수위가 제방고보다 높을 때 월류에 의한 제방붕괴로 이어지며, 이러한 월류에 의한 제방붕괴는 가장 전형적인 것이다. 지금까지 월류에 의한 제방붕괴에 관한 연구는 연구자의 다양한 관점 및 방법을 통해 진행되고 있다. 실제 제방붕괴를 관측하는 것은 불가능하므로 기존의 소규모 수리실험 및 모델링을 통한 제방붕괴 메커니즘 분석에는 사실상 한계가 있다. 이러한 점에서 실규모 수리실험을 통한 월류에 의한 제방붕괴 메커니즘을 3차원으로 분석할 필요가 있다. 본 연구에서는 드론 영상을 이용하여 제방붕괴 메커니즘 분석 연구를 수행하였다. 제방은 시간의 흐름에 따라 붕괴양상이 발전한다는 점 등에서 매우 복잡한 물리적 특성이 있다. 드론의 오토촬영 기법을 통한 제방이 붕괴되는 순간을 촬영하기는 쉽지 않기 때문에 셔터스피드촬영 기법을 적용하였다. 특히, 짧은 시간에 변화되는 제방의 붕괴양상을 구체적으로 표현하기 위해 두 대의 드론을 횡·종 방향으로 동시에 비행하여 분석 시 3차원 입체감을 최대화하였다. 이후 횡·종 방향에서 동 시간대 수집된 드론 이미지를 분류하여 PIX4D 매핑 기법을 활용한 최소 정합을 통하여 드론을 활용한 제방붕괴 메커니즘 분석의 활용 가능성을 제시하였다. 향후 스마트 시대의 물산업 경쟁력을 제고함에 있어, 폭이 좁은 하천에 효율적이며 고해상도 시공간 자료를 확보할 수 있는 드론을 활용한 스마트 하천재해 예측 및 관리기술 개발을 통한 하천 원격탐사의 경쟁력을 확보하는 것이 중요하다고 사료된다.