• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2879-2887
• /
• 2011

This research is aimed for the better understanding of corrosion behavior of carbon steel in ETA or $NH_3$ solution at high temperature. To minimize the corrosion it is important to select proper pH control agent(s), which also let it maintain basic or reductive environment inside the steel pipe. This work will provide the practical guideline which can be applied to the nuclear power plant for developing the life extension method of carbon steel. Experiments were carried out by measuring the corrosion rate using the potentiodynamic polarization curve of carbon steel in ETA and NH3 at different temperatures. The corrosion rate was estimated by using the Tafel curve measured under various test conditions: i) $NH_3$ is less than ETA as a pH agent. ii) the corrosion was reduced at high pH, and iii) the corrosion was maximum in the temperature range of $150\sim200^{\circ}C$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.230-237
• /
• 2017

In this study, electrochemical methods were used to determine the optimum protection potential of S355ML steel for the cathodic protection of offshore wind-turbine-tower substructures. The results of potentiodynamic polarization experiments indicated that the anodic polarization curve did not represent a passivation behavior, while under the cathodic polarization concentration, polarization was observed due to the reduction of dissolved oxygen, followed by activation polarization by hydrogen evolution as the potential shifted towards the active direction. The concentration polarization region was found to be located between approximately -0.72 V and -1.0 V, and this potential range is considered to be the potential range for cathodic protection using the impressed current cathodic protection method. The results of the potentiostatic experiments at various potentials revealed that varying current density tended to become stable with time. Surface characterization after the potentiostatic experiment for 1200 s, by using a scanning electron microscope and a 3D analysis microscope confirmed that corrosion damage occurred as a result of anodic dissolution under an anodic polarization potential range of 0 to -0.50 V, which corresponds to anodic polarization. Under potentials corresponding to cathodic polarization, however, a relatively intact surface was observed with the formation of calcareous deposits. As a result, the potential range between -0.8 V and -1.0 V, which corresponds to the concentration polarization region, was determined to be the optimum potential region for impressed current cathodic protection of S355ML steel.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.162-168
• /
• 2000

The influence of phenolsulfunate concentrations on electroplating characteristics and electrochemical behaviors was investigated with a viewpoint of electrolyte aging using the circulation cell and potentiostate And comparison of tinplate coating appearance such as glossiness and Image clarify has been also studied with varying of phenolsulfonic acid (PSA) solutions. As the aging of electrolyte proceeded, the limiting current density was moved to a lower current density region by the limitation of mass transfer, and higher phenolsulfunate concentrations resulted in the narrower optimum current density range and deterioration of coating surface of tinplates. The difference of the limiting current density was not remarkable with increasing electrolyte temperature. Thus the electrolyte aging was attributed to the limitation of thermally-activated process such as mass transfer of reducible ions. It has also been considered that the accumulation of phenolsulfonate suppressed normal electrotinning reaction by reducing the mobility of stannous ions, taking into account of the smaller effect of electrolyte aging. Experiments showed similar polarization behavior between the electrolyte of high phenolsufonate solution and the aged one, which comes to conclude that the accumulation of phenolsulfonate is one of the major causes of electrolyte aging.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.291-298
• /
• 2021

In this study, the future of countermobility capability is presented by analyzing the status of the countermobility obstacles focusing on the history of landmines and munitions. The conventional landmine was forbidden globally by the CCW and Ottawa Treaty because it caused civilian damage after the war. Because the inhumanity of those mines had been acknowledged, shatterable mines with a self-destruct (SD) function and M93 "HORNET" anti-tank munition with enhanced sensors have been fielded. In 2016, the Obama administration announced a policy that banned all antipersonnel landmines, leaving a considerable gap in the countermobility capability. To deal with these problems, the developments of "SAVO" and the SLEP program of Volcano mines were conducted. In the sense of a long-term approach, the countermobility obstacles, including mines, were chosen as fundamental forces for Multi-Domain Operations and were improved to Terrain Shaping Obstacles (TSO). TSO has improved sensors and mobility kill capabilities and features an enhanced remote control over each munition on the battlefield through a network established with satellite communication. The combined arms countermobility might be fully capable until 2050 if the TSO program can be completed successfully.

• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.65-76
• /
• 2006

Scz1, an isolate of Sclerotinia homoeocarpa, was recently reported as a novel pathogen responsible for dollar spot disease in Zoysiagrass, a warm season turfgrass. Scz1 possessed different characteristics on mycelial pigment, mycelial affinity and host pathogenecity compared to those of Scb1, a typical isolate, obtained from creeping bentgrass, a cool season turfgrass. In this study, only three isolates, Scz1, Scz2(another analogous isolate of Sclerotinia homoeocarpa from zoysiagrass), and Scb1, were examined at the molecular level using the internal transcribed spacer(ITS) and random amplified polymorphic DNA(RAPD) assays to verify their identification and genetic variation. As a result of ITS assay, partial ITS sequences of three isolates showed 94-97% similarity with a standardized ITS sequence of S. homoeocarpa registered on BLAST. In the analysis of RAPD, range value through similarity matrix was 0.167 between Scz1 and Scb1, 0.139 between Scz2 and Scb1, and 0.713 between Scz1 and Scz2, respectively. Furthermore, tendegram analysis indicated that Scz1 and Scz2, unlike Scb1, were clustered together as accompanying a high genetic similarity. In in vitro fungicide bioassay, $EC_{50}$ value representing the sensitivity degree to propiconazole, a well-known fungicide for dollar spot disease, was 0.012 ${\mu}g/ml$ for Sczl, 0.003 ${\mu}g/ml$ for Scz2, and 0.030 ${\mu}g/ml$ for Scb1. From all data taken, we concluded that both Scz1 and Scz2 belonged to one group of S. homoeocarpa, since they exhibit the same host range and high level of genetic similarity, whereas their chemical competences to a fungicide were different. This study would provide further approach for assessing genetic diversity of S. homoeocarpa isolates as well as characterizing individual isolate against chemical exposure.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.703-710
• /
• 2010

In this study, a tactile stimulator was developed to resolve some problems from the previous version of the system such as system configuration, inappropriate stimulation control and additional problems. The developed tactile stimulator consists of control unit, drive unit and vibrator unit. The control unit was controlled by E-Prime software to generate appropriate vibration pulses. The drive unit supplies enough energy to the vibrator to generate effective stimulation pulses. The vibrator unit consists of small coin type vibrator and velcro, and was made to be attached at the hand easily. The developed tactile stimulator was designed by small-size, light-weight, low-power, simple-fabrication, max 35 channels and little delay time from instruction signal of E-Prime software to vibrator. The duration and magnitude of stimulation was controlled by 10 grades and the problems concerning stimulation control were compensated by wideband frequency ranges. Additionally, the electrical safety was ensured by low voltage operation. Vibrator was made to be attached on finger as well as on any part of the subject. Since this tactile stimulator is developed based on E-Prime software which is widely used in cognitive science, it is believed that this stimulator be suitable for the wide application of cognitive science study.