• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.528-533
• /
• 1995

An analyical method is proposed to construct a clamp jointed structure as an equivalent stiffness matrix element in the finite element modal analysis of a complex beam structure. Static structural analysis was first made for the detail finite element model of the clamp joint. Utilizing the results of this analysis, the equivalent stiffness matrix element was buildup by using the flexibility influence coefficient method and Guyan condensation. The proposed method was applied to finite element modal analysis of a clamp jointed cantilever beam. And the finite element analysis results were compared to those experimental modal analysis. Comparison shows doog agreement each other Furthermore the effects of normal contact(or clamping) load on the equivalent stiffness matrix was also examined. The equivalent stiffness matrix showed little change in spite of the remakable increase in the contact load on the clamp joint.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.3
• /
• pp.77-82
• /
• 2001

반복하중을 받는 현장타설말뚝에 대한 두 가지의 주요 관심사항은: (a) 지지력의 변화 가능성 그리고 (b) 누적변형량에 의한 기초의 가능성 저하이다. 이러한 인자들에 대한 평가를 위하여, 모형점토지반에 설치된 24개의 모형현장타설말뚝에 대한 정적 및 동적경사재하시험(12개의 압축 및 12개의 인발)을 수행하였다. 경사반복압축재하시험에서는 반복하중에 의한 지지력의 변화가 무시할 정도였으며, 누적변형량은 송전철탑의 기능성에 영향을 줄수도 있을 것으로 사료된다. 그러나, 경사반복인발시험에서는 과도한 누적변형이 발생하게 되어 결과적으로 현장타설말뚝주변과 점토사이의 접촉면적이 감소하는 것으로 나타났다. 접촉면적의 감소 결과, 반복경사인발하중에 의해서 경사인발지지력의 현저한 감소가 일어난다는 사실을 알 수 있었다. 정적경사인발지지력의 50에서 70퍼센트에 해당되는 반복하중을 받는 대부분의 현장타설말뚝들은 인발되었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.247-250
• /
• 2000

This paper presents the dynamic analysis and experiment for a shaft system supported by angular contact ball bearings. Among others, the dynamic characteristics of bearings are significantly affected by axial preload and radial load applied. This paper rigorously analyzes the dynamic characteristics of a shaft system with angular contact ball bearings subject of axial preload so as to result in eigenvalues as well as bearing stiffness characteristics. Experiments are also performed to identify natural frequencies and stiffness characteristics of bearings implemented. Comparison is made on the theoretical and experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.115-121
• /
• 2001

In micro automation technology, the concurrent realization of a high resolution and a large operating rage has been achieved by a dual actuator, usually called by piggy-back system, conventionally. But, because of its manufacturing cost, the complexity of control, and the limit of overall bandwidth, the contract-free and single servo actuators have been suggested with specific applications. In this paper, we suggest a novel non-contact surface actuator suing combination of the Lorentz force and the magnetized force, and discuss the actuating principles including an analytical approach. Differently from the existing planar system, an operating range of the suggested system can be expanded by an additional attachment of active elements. Therefore, it is estimated to be suitable for the next-generation moving system.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.122-122
• /
• 2009

금속기판과 액체금속의 젖음성은 일반적으로 액적법 (sessile drop)에 의해 고체와 액체간의 접촉각 측정을 통해서 알 수 있다. 이러한 방법에 의한 젖음성 실험결과는 고체와 액체계면에서의 반응이 무시될 수 있는 경우에 적용가는 하지만 연속용용도금공정과 같이 용융된 금속내부로 강판이 인입되는 과정에서 계면반응이 동적으로 진행되는 과정에서의 젖음성을 모사하기에는 이러한 방법의 신뢰성이 떨어지는 문제점이 있다. 따라서 본 연구에서는 실제 용융도금공정과 유사하게 소둔열처리된 저탄소강판이 환원성분위기내에서 Zn 및 Zn-Al 용융도금욕 내부로 연속적으로 인입되는 과정에서의 젖음력 및 접촉각 등의 측정을 통해 실제 도금공정상의 도금성과 젖음성의 연관성을 규명하고자하였다. 연구결과 일반적인 Zn 도금욕의 경우 젖음성이 양호하지만 Al함량이 높은 경우에는 젖음성이 좋지 못한 것으로 나타났다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.281-285
• /
• 2002

A new method of dynamic contact force measurement between a pantograph and a contact wire is proposed in this paper The method does not require design modification of an original pantograph in order to install sensors such as load cells. Contact forces can be expressed as the sum of vertical shear forces at the support points and inertial forces. Using specially-designed strain gage rosettes. vertical shear forces at the supported points can be measured without noise mixing and thermal effects. In order to obtain contact forces from shear forces, 3 inertial force compansation methods are proposed and compared in this paper. By validation process, the new proposed measurement method is verified to be applicable to the on-line current collection test.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.348-354
• /
• 2003

An analysis of the dynamic behavior between disk and roller has been performed when the torque is transmitted to toroidal IVT (Infinitely Variable Transmission). The contact area, shape and pressure with elliptical shapes between disk and roller are computed as the transmission ratios are changed. This study will give the information of contact shapes between roller-input dist and roller-output disk which are working under the most severe condition. The computed results are expected to guide the design criteria for the enhanced endurance li(e. Furthermore, the investigation of contact behaviors is very crucial to develop the traction oil that the efficiency of IVT system is most dependent on.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.159-165
• /
• 2002

Numerical analysis of dynamic contact and stress developing in the high-speed driven valve of an internal combustion engine is presented. The valve is modeled by finite element techniques, and the dynamic contact between the valve and the valve seat is analyzed by the solution strategies of differential algebraic equations. Also an iterative scheme similar to the augmented Lagrange multiplier method is employed to enforce the contact constraints. It is shown that the contact and separation between the valve and the valve seat can be computed by the finite element techniques without assuming the artificial springs, and the efficiency and accuracy of the solution are demonstrated by the numerical examples.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.619-621
• /
• 2005

햅틱 장치를 이용한 변형체의 실시간 시뮬레이션은 가상현실을 구축하기 위한 중요한 기술의 하나로서 최근에 크게 각광받고 있다. 본 연구에서는 햅틱 장비와 변형체의 정확한 인터페이스를 구축하기 위하여 변형체의 물리적 특성을 고려한 연속체적 모델인 유한요소법을 통한 선행해석을 수행한다. 변형체와 햅틱 장치의 상호작용 과정에서 발생하는 변형과 반력을 사용자에게 실시간으로 제공하기 위하여 선행해석 결과를 이용한 변형체의 정적 시뮬레이션을 구현한다. 이와 함께 햅틱 장치와 접촉이 이루어지는 부분의 변형을 보다 자연스럽게 표현하기 위하여 적응적 유한요소법인 s-adaptive 방법을 적용하였으며 햅틱 장치와 접촉이 끝난 후의 변형체가 평형 상태로 돌아가는 과정을 모사하기 위하여 Newmark scheme을 통한 동적 시뮬레이션을 구현한다. 또한 최적화 행렬 연산 함수인 BLAS와 LAPACK을 이용하여 행렬 연산을 빠르게 수행하고 효율적인 메모리 사용 추구한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.24-31
• /
• 1998

In this study, a procedure is presented for the dynamic analysis of a multibody tracked vehicle system. The planar vehicle model used in this investigation is assumed to consist of two kinematically decoupled subsystems. i.e., the chassis subsystem and track subsystem. The chassis subsystem includes the chassis frame, sprocket, idler and rollers, while the track subsystem is represented as a closed kinematic chain consisting of rigid links interconnected by revolute joints. The nonlinear contact force modules describing the interaction between track links, and sprocket, idler, rollers and ground will be developed.