• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.307-312
• /
• 1995

장거리 시스템의 경우에 있어서 기동과 정지 시의 동적하중은 구동부 입력크기의 변화와 구동부간이 기동 시간차이로부터 발생되며, 벨트로 전파되어 장력변화를 일으키고, 과도한 장력의 변화는 인장과 압축의 탄성파로 벨트요소의 응력을 증가시키며, 벨트, 풀리, 아이들러(idler)등의 벨트요소들을 파괴시킨다. 따라서 동적해석에 의한 설계가 필수적으로 요구되어 벨트의 동적거동 해석에 대한 연구가 많이 수행되고 있다. 본 연구에서는 벨트 컨베이어 시스템을 집중질량모델(lumped mass model)로 근사하여 모델링하는 방법을 도입하여 세부요소에 대한 운동방정식을 유도하고, 각 요소 모델링을 결합하여 전체 운동방정식을 수립하였으며, 예제 시스템에 적용하여 동적거동을 해석하였다. 예제 시스템에 있어서 기동시의 구동입력을 두 가지 형태의 입력을 이용하였고, 정지시에는 구동부 브레이크가 없는 경우로 정상운전상태에서 순간적으로 구동부의 동력을 제거하는 방법을 적용하였다. 시뮬레이션 결과를 통하여 기동시의 구동입력을 적절히 제어하므로 벨트 속도와 장력의 변화를 줄일 수 있는 입력형태를 결정할 수 있었고, 이 때의 테이크업의 운동도 구할 수 있었다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.8
• /
• pp.698-707
• /
• 2011

This paper is to analyze the stability of the thick plate on inhomogeneous Pasternak foundation, with linearly varying thickness and concentrated mass by finite element method. To verify this finite element method, the results of natural frequencies and buckling stresses by the proposed method are compared with the existing solutions. The dynamic instability regions are decided by the dynamic stability analysis of the thick plate on inhomogeneous Pasternak foundation, with linearly varying thickness and concentrated mass. The non-dimensional Winkler foundation parameter is applied as 100, 1000 and non-dimensional shear foundation parameter is applied as 5. The tapered ratios are applied as 0.25 and 1.0, the ratios of concentrated mass to plate mass as 0.25 and 1.0, and the ratio of in-plane force to critical load as 0.4. As the result of numerical analysis of the thick plate on inhomogeneous Pasternak foundation for $u{\times}v=300cm{\times}300cm$ and $a{\times}b=600cm{\times}600cm$, instability areas of the thick plate which has the larger rigidity of inner area are farther from ${\beta}$-axis and narrower than those which has the larger rigidity of outer area.

• Tunnel and Underground Space
• /
• v.13 no.3
• /
• pp.180-186
• /
• 2003

The fracture processes under dynamic loading in tension were simulated using a proposed numerical approach and analyzed to determine dynamic tensile strength. The dynamic tensile strength and the scatter of the strength data decreased with increasing uniformity coefficients. The differences of static and dynamic tensile strength were due to the stress concentrations and redistribution mechanisms in the rock specimen. Although there were different mechanisms for the static and dynamic fracture processes, the static and dynamic tensile strengths were close to the mean microscopic tensile strength at high values of the uniformity coefficient. This paper shows that the rock inhomogeneity has an effect on dynamic tensile strength and is a factor that contributes to the different specimen strengths under dynamic and static loading conditions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.1
• /
• pp.27-41
• /
• 2023

Submerged floating tunnels must be connected to the ground to connect continents. The displacement imbalance at the shore connection between the underground bored tunnel and submerged floating tunnel can cause stress concentration, accompanying a fracture at the shore connection. The elastic joint has been proposed as a method to relive the stress concentration, however, the effect of the elastic joints on the dynamic behavior should be evaluated. In this study, the submerged floating tunnel and shore connection under dynamic load conditions were simulated through numerical analysis using a numerical model verified through a small-scaled physical model test. The resonant frequency was considered as a dynamic behavioral characteristic of the tunnel under the impact load, and it was confirmed that the stiffness of the elastic joint and the resonant frequency exhibit a power function relationship. When the shore connection is designed with a soft joint, the resonant frequency of the tunnel is reduced, which not only increases the risk of resonance in the marine environment where a dynamic load of low frequency is applied, but also greatly increases the maximum velocity of tunnel when resonance occurs.

• Tribology and Lubricants
• /
• v.14 no.1
• /
• pp.94-98
• /
• 1998

혈관내피세포는 혈관의 내벽에 단일 층을 구성하고 있는 상피세포로 동맥경화나 혈관협착의 원인에 매우 중요한 역할을 하는 것으로 알려져 있다. 그리고, 모든 혈관 질환의 발생장소가 혈관이 나뉘는 분지부에 집중되고 있어, 혈류역학과 혈관질환 간에 상호연관성이 있음을 짐작할 수 있다. 특히, 최근에 와서 혈관내피세포가 혈액유동에 의해 발생하는 전단응력을 인지하여 혈관의 제반 생리적 반응을 조절한다는 연구결과가 속속 발표되고 있어, 혈관질환의 극복을 위한 연구 개발에 혈관내피세포에 대한 이해의 중요성이 증대되고 있다. 이에 본 연구에서는 혈관내피세포에 혈류와 같은 크기의 전단응력을 부가하여 세포의 생리적 반응을 고찰할 수 있는 평판형 층류발생장치를 설계, 제작하였다. 설계된 평판형 층류발생장치는 유동환경 하에서의 혈관내피세포의 동적반응을 고찰 할 수 있도록 유동액의 온도, 산도, 전단응력의 크기를 조절할 수 있도록 설계하였으며, 제작된 실험장치를 이용하여 전단응력에 의한 혈관내피세포의 형태변화를 고찰하였다. 개발된 층류발생장치는 혈관내피세포의 연구 뿐 아니라, 백혈구의 점착, 암세포의 전이등에도 다양하게 활용이 가능하다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2097-2107
• /
• 1996

The dynamic photoelastic technique had been utilized to investigate the possibillity of relieving the large local singular stresses induced at the corner of a right- angle- indenter. The indenter compressed a semi-infinite body dynamically with an impact load applied on the top of the indenter. The effects of the geometric changes of the indenter in terms of the diameter (d) and the location (1) of the stress relieving notch on the behavior of the dynamic contact stresses were investigated. The influence of stress relieving notches positioned along the edge of the semi-infinite body on the dynamic contact stresses were also studied by changing the diameter (D) and the location (L) of the notch. A multi-speak-high speed camera with twelve sparks were used to take photographs of full field dynamic isochromatic fringe patterns. The contact singular stresses were found to be released significantly by the stress relief notches both along the indenter and the edge of the semi-infinite body. The optimal position and geometry of the stress relieving notches were obtained with the aid of limited experimental results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.409-416
• /
• 2019

An improved numerical model for non-linear analysis of reinforced concrete (RC) slabs subjected to blast loading is proposed. This approach considers a strain rate dependent orthotropic constitutive model that directly determines the stress state using the stress-strain relation acquired from the data obtained using the biaxial strength envelope. Moreover, the bond-slip between concrete and reinforcing steel is gradually enlarged after the occurrence of cracks and is concentrated in the plastic hinge region. The bond-slip model is introduced to consider the crack direction of the concrete under a biaxial stress state. Correlation studies between the numerical analysis and the experimental results were performed to evaluate the analytical model. The results show that the proposed model can effectively be used in dynamic analyses of reinforced concrete slab members subjected to explosive loading. Moreover, it was determined that it is important to consider biaxial behavior in the material model and the bond-slip effect.

• Tunnel and Underground Space
• /
• v.20 no.1
• /
• pp.65-72
• /
• 2010

Crack-controlled blasting method which utilizes notched charge hole has been proposed in order to achieve smooth fracture plane and minimize the excavation damage zone. In this study, the blast models, which have a notched charge hole, were analyzed using dynamic fracture process analysis software to investigate the effect of the geometry of a notched charge hole and decoupling indexes of the charge hole on crack growth control in blasting. As a result, crack extension increased and damage crack decreased with the notch length. Ultimately, stress increment factors and resultant fracture patterns with different notch length and width were analyzed in order to examine the effect factors on the crack growth controlling in rock blasts using a notched charge hole.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.2
• /
• pp.107-113
• /
• 2006

This paper presents an efficient dynamic modeling method for multi-stepped rotor system using effective spring elements to take into account the structural weakening effect due to the steps. This paper demonstrates that the Timoshenko shaft model give rise to a significant error in the case of multi-stepped rotors. An effective bending spring model is introduced to represent the structural weakening effect in the presence of steps. The proposed modeling method is validated through a series of simulations and experiments. Finally, a spindle is dealt with as an analysis example.

• Nuclear Engineering and Technology
• /
• v.25 no.4
• /
• pp.552-560
• /
• 1993

In this study, the detailed fuel assembly stress analysis model to evaluate the structural integrity for seismic and blowdown accidents is developed. For this purpose, as the first step, the program MAIN which identifies the worst bending mode shaped fuel assembly(FA) in core model is made. And the finite element model for stress calculation of FA components is developed. In the model the fuel rods (FRs) and the guide thimbles are modelled by 3-dimensional beam elements, and the spacer grid spring is modelled by a linear and relational spring. The constraints come from the results of the program MAIN. The stress analysis of the 16$\times$16 type FA under arbitary seismic load is performed using the developed program and modelling technique as an example. The developed stress model is helpful for the stress calculation of FA components for seismic and blowdown loads to evaluate the structural integrity of FA.